Embedding Cassettes and Storage
Perkin Elmer US LLC Torch Cassette, White/Green Cassette Only
This cassette is included in the NexION 5000 ICP-MS Configuration's Sample Introduction Kit (N8160020).
Ted Pella Inc Carbon Conductive Tape, 25mm W x 5m L
Both sides of the 200µm thick conductive polycarbonate base have 30µm thick conductive adhesive. Total thickness is 260µm. Same material as the PELCO Image Tabs™. Protection for handling, storage and shipping is provided on one side by the 25µm thick, transparent liner and on the other side by the 40µm thick, white liner. The conductive adhesive is a carbon–filled acrylic adhesive, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol or alcohols. Temperature maximum is 60°C (140°F). Small impurities of Cu, Si, Sb, S, Na, P and very small impurities of Fe and Mg can be found. Refrigeration will increase shelf life but a warm-up time of 1 hour is then required before use.
Grainger Heated Balaclava Black Universal
The Heat Factory Heated Balaclava is a full face mask made of soft fleece fabric with an integrated heating system powered by a rechargeable lithium-ion battery. It features three heat settings providing up to 10 hours of warmth, as well as a removable hood and face mask. The balaclava is machine washable, has an adjustable fit, and comes with a charger. It provides full coverage for cold weather activities.
Electron Microscopy Sciences Histosette Biopsy Cassettes in QuickLoad™ Stacks, Blue
Molded from a special high density acetal,the acetal caseettes keep specimens safely submerged and are resistant to the chemical action of most solvents used in histology laboratories. The efficient flow-through slots maximize fluid exchange and ensure proper reagent drainage.
The one-piece disposable plastic cover is pre-installed on each cassette and eliminates the need for reusable steel lids. The cover can be opened and closed as often as necessary and will always relock, reducing the possibility of specimen loss. The anterior printing area is at a 45° angle and offers an unobstructed view of the writing surface. For Leica and Sakura printers.
Color: Blue
Electron Microscopy Sciences IP ActivFlo Biopsy III Cassettes, Gray
Patented "Fluidic Flow" pore design maximizes reagent exchange. IP ActivFlo Biopsy Cassettes feature innovative V-shaped 0.67 mm pores that pull fluid in and force air out. Sloped walls create a basket for small tissue management. The one-piece cassettes with 'frangible lids' have been designed for the Leica IPC Cassette Printer, with <1% printing error rate.
Color: Gray
Electron Microscopy Sciences Swingsette™ Tissue Cassettes in QuickLoad Stacks, White
These cassettes will load in Leica and Sakura cassette labeling printers in one simple operation of loading the cassette sleeve in the magazine. In convenient stacks of 40 cassettes that save time and money
The specially designed cassettes differ by the hinge that holds the base and cover together. This hinge allows the Swingsette to be opened and closed as often as necessary.
Anterior printing area is at a 45 degree angle, offering an unobstructed view of the writing surface.
Color: White
Type: Slotted
Electron Microscopy Sciences IP ActivFlo Biopsy I Cassettes, Taped Aqua
Patented "Fluidic Flow" pore design maximizes reagent exchange. IP ActivFlo Biopsy Cassettes feature innovative V-shaped 0.67 mm pores that pull fluid in and force air out. Sloped walls create a basket for small tissue management. The one-piece cassettes with 'frangible lids' have been designed for the Leica IPC Cassette Printer, with <1% printing error rate.
Color: Taped Aqua
Electron Microscopy Sciences EMS Multi-Well Embedding Mold, Blue
This unique silicone mold has 2 different cavity sizes to meet all of your embedding needs. 2 troughs: 1"(L) x 1/8"(W) x 1/8"(D). 14 cavities: 1/4"(L) x 1/2"(W) x 1/8"(D). 1 trough: 2 3/4"(L) x 3/32"(W) x 1/8"(D). 10 cavities: 3/8"(L) x 3/4"(W) x 1/8"(D). Each cavity has an alpha-numeric marking, A1-A7, B1-B7, C1-C5, D1-D5.
Electron Microscopy Sciences Micromesh 1 Compartment Cassette, Peach
Single compartment biopsy processing and embedding cassettes is made from acetyl polymer with1676 square openings (0.38 mm) that allow for a greatly improved fluid exchange without having to use the biopsy pads. The cassettes are totally resistant to the most histological chemicals and solvents.
Large anterior and posterior slots in both cassette and cover ensure that the Micromesh™ biopsy cassettes will sink rapidly (far better than cloth mesh cassettes). A large square compartment measuring 27 mm is perfect even for needle biopsies. The cover does not protrude above the cassette, a great space saving feature allowing more cassettes to be stacked in automatic labeling machines and tissue processors.
Color: Peach
MSC Made in USA RTC9W 2" Wide x 1-13/16" Long x 1-13/16" High Rectangle Chipboard Box 1 Wall, White
Made in USA RTC9W 2" Wide x 1-13/16" Long x 1-13/16" High Rectangle Chipboard Box 1 Wall, White
Electron Microscopy Sciences Unisette™ Tissue Cassettes in QuickLoad™ Stacks, Lilac
Molded from a special high density acetal, these tissue cassettes for Leica and Sakura printers keep specimens safely submerged in liquid and are totally resistant to the chemical action of solvents used in histology laboratories. The efficient flow-through slots maximize fluid exchange and ensure proper drainage.
The one-piece snap-latch and hinge-lock design prevents early separation of base and lid and allows one-hand operation. Lids are attached in an open position for easy filling, but can be opened or closed as often as necessary and will always relock securely. The tab on the left front side makes opening easy. Lids are easily removed by pulling sideways. The anterior writing area is at a 35 degree angle.
Color: Lilac
Electron Microscopy Sciences Histosette Tissue Cassettes in QuickLoad™ Stacks, Peach
Molded from a special high density acetal,the acetal caseettes keep specimens safely submerged and are resistant to the chemical action of most solvents used in histology laboratories. The efficient flow-through slots maximize fluid exchange and ensure proper reagent drainage.
The one-piece disposable plastic cover is pre-installed on each cassette and eliminates the need for reusable steel lids. The cover can be opened and closed as often as necessary and will always relock, reducing the possibility of specimen loss. The anterior printing area is at a 45° angle and offers an unobstructed view of the writing surface. For Leica and Sakura printers.
Color: Peach
Electron Microscopy Sciences Slimsette™ Biopsy Cassettes in QuickLoad™ Stacks, Tan
Cassettes, for use with Leica and Sakura printers, are molded from a special high density acetal. They keep specimens safely submerged and are totally resistant to the chemical action of solvents used in histology laboratories. The efficient flow-through slots maximize fluid exchange and ensure proper reagent drainage. The cover does not protrude above the cassette, a great space saving feature. The anterior printing area is at a 45 degree angle and offers an unobstructed view of the writing surface.
The one-piece disposable plastic cover is pre-installed on each cassette and eliminates the need for reusable steel lids. The cover can be opened and closed as often as necessary and will always relock, reducing the possibility of specimen loss. For Leica ans Sakura printers.
Color: Tan
Electron Microscopy Sciences Histosette Tissue Cassettes in QuickLoad™ Stacks, Tan
Molded from a special high density acetal,the acetal caseettes keep specimens safely submerged and are resistant to the chemical action of most solvents used in histology laboratories. The efficient flow-through slots maximize fluid exchange and ensure proper reagent drainage.
The one-piece disposable plastic cover is pre-installed on each cassette and eliminates the need for reusable steel lids. The cover can be opened and closed as often as necessary and will always relock, reducing the possibility of specimen loss. The anterior printing area is at a 45° angle and offers an unobstructed view of the writing surface. For Leica and Sakura printers.
Color: Tan