Ice Makers
Equipment designed to make aqueous and dry ice; products may be handheld, benchtop, or floor models. Includes water filters and filtration systems for ice makers.
Ice makers are used to produce ice from water or “dry ice” from liquid nitrogen. Most laboratories have access to an ice machine, since ice is used to keep samples and reagents cold during experiments or other lab work.
Ice makers are typically large floor-model units that are plumbed directly to a water source. However, smaller capacity benchtop and undercounter units are also available. Ice makers may contain replaceable air and water filters or cartridges and may have antimicrobial features that help to maintain water and ice quality.
Ice makers vary in size based on the amount of ice they can produce and store. They also vary based on the type or shape of ice produced, including:
- Cubes
- Flakes
- Nuggets/pearl-shaped
Some ice makers dispense water and ice; others have large covered bins from which one must scoop or otherwise transfer the ice into a secondary container.
Ice-making may be continuous until a certain threshold is reached, while other ice makers can be programmed to meet fluctuating demands and high- and low-use periods. Most ice makers run on a regular current, much like refrigerators or freezers. They usually vent toward the front, which allows them to be placed in smaller or enclosed areas.
Laboratory dry ice makers, produce small quantities of dry ice, usually about a 16 oz. (454 g) block at a time. One block typically takes less than five minutes to form. Production requires a tank of liquid carbon dioxide with a dip tube; a 50-pound tank can produce anywhere from eight to 16 blocks of dry ice. Other versions that produce dry ice as flakes or “snow” are also available.
- (2)
- (8)
- (4)
- (1)
- (1)
- (3)
- (10)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (3)
- (1)
- (1)
- (2)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (4)
- (1)
Filtered Search Results
Scilogex LLC SCILOGEX SCI100-PRO ROTOVAP
NC3824534 SCILOGEX SCI100-PRO ROTOVAP
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Felix Storch Inc Commercial Ice Machine ENERGY STAR certified 120 lb. 80 lb. clear ice production
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Model BIM85 is an ENERGY STAR certified 18"" deep commercial ice machine that is ETL-S listed to NSF-12 standards. This ice machine features a fully finished stainless steel cabinet and a jet black front with an easy-to-use slide-up lid. It is designed for freestanding use and features an air-cooled system to prevent overheating. The BIM85 produces up to 80 lbs. of clear, cube-style ice cubes daily. The interior can store up to 33 lbs. to help meet the needs of high-traffic commercial environments. All digital controls are conveniently located in front, including a function to adjust the thickness of each ice cube. This unit also has a water filter and a removable mesh filter at the rear to ensure easier condenser maintenance. This automatic ice machine features a clean function, a full bin sensor, attractive LED lighting, and an ice scoop to maximize convenience. The BIM85 is a great fit for break rooms, bars, restaurants, cafes, hotels, and similar spaces.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Genesee Scientific Corporation MED ICE PAN,YELLOW 4L W/O LID
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
4 Liters1 Ice Pan/UnitBrand: Genesee ScientificExcellent insulation, stackable, lightweight and leak-proof designSuperior durability - no sweat, no rust, no deformation and virtually unbreakableChemical resistance - can withstand dry ice, chemical solvents and liquid nitrogenSamples will remain frozen for over 12 hoursRecyclable ethyl-vinyl (EVA) material offers a non-toxic alternative to conventional ice pans and bucketsDimensions (L x W x H): 31.2 x 22.4 x 11.8cm
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSC
5000533108 3-4X.0001RATCHET STOP FOWLER
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Perkin Elmer US LLC PROBE STAND FOR LIQUIDS PROBE
PROBE STAND FOR LIQUIDS PROBE
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSC
5000545499 102471 ANVIL8.5MM.34IN SPARE P
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSC ANTARCTICA ICE MELT
50LB BAG CALC CHLORIDE ANTARCTICA ICE MELT
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Uline High Profile Machine Guard 36
High Profile Machine Guard - 36 X 48IN Removable
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSC
5000542326 STOP SLEEVE
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Felix Storch Inc ACCUCOLD Commercial Ice Machine ENERGY STAR certified 120 lb. clear cube-shaped ice production
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Model BIM125 is an ENERGY STAR certified commercial ice machine that is ETL-S listed to NSF-12 standards. This ice machine features a fully finished stainless steel cabinet and a jet black front with an easy-to-use slide-up lid. It can be used freestanding with an air-cooled system to prevent overheating. Inside, the BIM125 produces up to 120 lbs. of clear, cube-style ice cubes daily. The interior can store up to 40 lbs. to help meet the needs of high-traffic commercial environments. All digital controls are conveniently located in front, including a function to adjust the thickness of each ice cube. This unit also has a water filter and a removable mesh filter at the rear to ensure easier condenser maintenance. This automatic ice machine features a clean function, a full bin sensor, attractive LED lighting, and an ice scoop to maximize convenience: https://www.accucold.com/product/BIM125
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Polar Tech Industries DRY ICE COVER 24 X 12 - INSULA
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
NC2824586 DRY ICE COVER 24 X 12 - INSULA
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
MSC
5000513190 SURFACE PLATE STAND
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Andwin Scientific SECURE SEAL 70 EMBOSS MACHINE
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
- Produces clear, uniform raised seals on documents.
- Operates with whisper-quiet noise level of 50 dB.
- Electric operation with automatic or push-button activation.
- Features adjustable back gauge and side guides for paper positioning.
- Hand-engraved brass seal die type.
- Dies are easily interchangeable and rotatable 90°.
- Pressure control is adjustable for different materials.
- Includes security feature with key lock.
- Compact dimensions of 3.7 in x 11.2 in x 7.2 in.
- Weighs 17.6 lbs for easy handling.
- Supports free voltage from 100-240V for global use.
- Maximum paper insertion depth of 2.7 in.
- Standard die diameters available: 1.06 in, 1.42 in, 1.77 in.
- Has a carrying handle for portability.
- Comes with a one-year parts and 90 days labor warranty.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Andwin Scientific ANDWIN SCIENTIFIC
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
NC3906478 BOSE 894040-0200
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Hoefer, Inc Hoefer™ Gradient Maker, 100 ml total volume
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Ideal for generating gradients of polyacrylamide, sucrose and cesiium chlorideMilled of heavy acrylic plastic with high quality, leak-free Teflon valvesFlat base provides stability on magnetic stir. Comes with a support rod for attaching to a ring standTakes Luer or 4 mm ID tubing. With included adapters, can also take 2 mm ID or 22-gauge tubing.SG15, SG30, SG50 and SG100 include:Gradient Maker with Teflon Valves; Adapter Barbed Fitting; Luer Outlet Fitting; 22-gauge Needle; Support RodThe 500 ml SG500 Gradient Maker is made of two cylindrical acrylic chambers joined and mounted on a flat acrylic base.An easy-to-use push-pull valve opens and closes the passage between the reservoir and mixing chambersSuitable for forming polyacrylamide gradients or buffer gradients used with medium to small chromatography columnsIdeal for use with the SE615 Multiple Gel Caster SG500 includes:Gradient Maker with Push-Pull Valve; Hose Clamps (4 pieces)
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More