Produces dry ice in flake or snow form

Thermco™ DI800 - Dry Ice Machine utilizes a patented heat exchange to increase yield by up to 30%

Flaked ice machine preferred for lab, clinical and education use. CurranTaylor Scotsman self contained flake (crushed) ice packs tightly and cools quickly.

Flaked ice machine preferred for lab, clinical and education use. CurranTaylor Manitowoc low profile self contained flake (crushed) ice packs tightly and cools quickly.

CurranTaylor™ Scotsman™ Cube Ice Maker - Floor Model for lab, clinical, education, factory, and safety uses. Makes small, hard ice cubes for long lasting cooling and is also available in larger cube sizes.

Super compact NUGGET ice machine preferred for lab, clinical, and education use. CurranTaylor™ Scotsman™ self contained nugget ice packs tightly and cools quickly.

Scotsman™ Filters and Filter Cartridges for Ice Makers keeps ice makers cleaner while reducing failures due to lime scale, dirt, and excessive chlorine.

CurranTaylor Ice Maker Installation Kit includes the necessary supplies for an initial installation.

Each 50 lb. cylinder of liquid CO₂ will produce 8 or 9 blocks of dry ice measuring 3.62 x 4 in. (8.5 x 11cm) long

Capable of producing approximately 353 pounds of flaked ice per day.

Nordon Hoshizaki Ice machine and dispenser features the CycleSaver 12, every 12 hrs, it performs 15 min purge to clean itself and is protected by H-GUARD Plus antimicrobial agent.

Nordon Hoshizaki Ice machine and cuber features a Front in, front out airflow system that eliminates need for side and rear clearance.

Nordon Hoshizaki™ Self Contained Cuber with Built-in Storage Bin features durable, sustainable, and reliablefunctioning.

Nordon Hoshizaki Ice machine and dispenser features the CycleSaver™ design and includes the EverCheck™ alert system making unit simple to maintain

Take advantage of efficient operation, dependable performance, and the ease of removable, cleanable air filters by using a Hoshizaki™ self-contained ice maker and dispenser.

Durable, sustainable, reliable with built-in storage bin

Nordon Hoshizaki™ Self Contained Cuber with Built-in Storage Bin is durable, sustainable, and reliable—all with attractive an appearance to enhance your workspace.

For use with B-500PF Ice Storage Bin

Sanitary, self-contained bin stores fresh ice, continuously replenished

Super compact ice machine preferred for lab, clinical, and education use. CurranTaylor™ Scotsman™ self contained ice packs tightly and cools quickly.

NUGGET ice machine preferred for lab, clinical, and education use. CurranTaylor™ Scotsman™ self contained nugget ice packs tightly and cools quickly.

Scotsman™ Prodigy™ Undercounter Cuber uses energy efficiently, exceeding California and Federal energy efficiency regulations.

Uses significantly less energy and water than other cube ice machines, exceeding California and U.S. energy efficiency regulations

The Scotsman Benchtop Nugget ice and water dispenser features specially designed contoured sides for enhanced breathability and external air filter.

Nugget ice machine for lab, clinical and education use. CurranTaylor Scotsman self contained nugget ice lasts longer, packs tightly and cools quickly.

Operates at very low pressure and incorporates multiple pressure relief safeguards

The Frigimat Dry Ice Maker eliminates the need to buy large quantities of dry ice when only a few blocks are needed. It employs the Joule-Thomson effect to produce a solid 454 gm (16 oz.) block of dry ice in one to two minutes. A brass relief valve safely vents excess gas. Removing the dry ice block requires just 30 seconds. Each 50 lb. cylinder of liquid CO2 will make 8 to 9 blocks of dry ice, each measuring 8.5cm (3 1/8") x 11cm (4 3/8").

The unit is made from epoxy-coated steel with an aluminum ice chamber and brass valves with four non-skid rubber feet. Shipping weight: 5.5kg (12 lbs) and includes a 1.8m (6 ft) nickel-plated copper connecting tube with standard GCA 320 (0.830" – 14) thread couplings for easy attachment to an LCO2 cylinder.

The Frigimat Dry Ice Maker eliminates the need to buy large quantities of dry ice when only a few blocks are needed. It employs the Joule-Thomson effect to produce a solid 454 gm (16 oz.) block of dry ice in one to two minutes. A brass relief valve safely vents excess gas. Removing the dry ice block requires just 30 seconds. Each 50 lb. cylinder of liquid CO2 will make 8 to 9 blocks of dry ice, each measuring 8.5cm (3 1/8") x 11cm (4 3/8").

The unit is made from epoxy-coated steel with an aluminum ice chamber and brass valves with four non-skid rubber feet. Shipping weight: 5.5kg (12 lbs) and includes a 1.8m (6 ft) nickel-plated copper connecting tube with standard GCA 320 (0.830" – 14) thread couplings for easy attachment to an LCO2 cylinder.