Writing Implements and Accessories
Grainger Engraving Tool 3/8 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R984 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch and an overall length of 4 inches. The tool features a 135 degree point angle for detail engraving in materials like plastics, wood, aluminum and brass. It can be used in low to medium production runs at spindle speeds up to 15,000 RPM in CNC machines. The tool has a bright finish for visibility and is made in the USA by Micro 100.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Double End 16R996 is a double-ended carbide tool for engraving, scribing, and deburring in CNC machining. It has a 60-degree angle and .010" radius point on each end. The tool is 3" long with a .1875" shank diameter. Made of solid carbide, it offers wear resistance and long life. The double-ended design allows efficient indexing between cutting edges. It can machine steel, aluminum, brass, copper, plastics, and composites. Recommended parameters are 20,000-40,000 RPM with .001-.005" chip load.
Grainger Engraving Tool 7/16 L of Cut Carbide
The Grainger 16R987 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for a variety of cleaning applications. This 8" x 4" hand pad has an open web construction that allows it to conform to surfaces. It is made of nylon and synthetic fibers that are non-scratching on most surfaces. The pad is durable, rinses easily, and can be used wet or dry for scrubbing, wiping and polishing. It works well on glass, tile, stainless steel and other hard surfaces. The 3M Scotch-Brite General Purpose Hand Pad provides versatile cleaning performance.
Grainger Engraving Tool 8.00mm L of Cut Carbide
The Micro 100 Engraving Tool Double End 16R903 is a double-ended carbide engraving tool with a 1/8" shank diameter. It has a 60 degree included angle and a 0.005" tip radius. The overall length is 2-1/2". It is designed for hand engraving in materials like plastics, soft metals, wood, and fiberglass. The double-ended design provides two cutting edges for extended tool life. Made in the USA from solid carbide, this high quality engraving tool is rigid and durable for precision engraving results.
Grainger Engraving Tool 3/8 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R868 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch and an overall length of 3 inches. The tool features a 135 degree point angle for detail engraving in materials like plastics, wood, aluminum and brass. It can be used in low to medium production runs at spindle speeds up to 15,000 RPM in CNC machines. The tool's high-speed steel construction provides good wear resistance.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Double End 16R939 is a double-ended carbide engraving tool made in the USA by Micro 100. It has a 1/8" shank diameter and comes in a set of 2, with one end having a 30 degree included angle and the other having a 60 degree included angle. The overall tool length is 2-1/2". This versatile tool can be used for detail engraving work in most machinable materials.
Grainger Engraving Tool 7.00mm L of Cut Carbide
The Micro 100 Engraving Tool Single End 16T018 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8", an overall length of 2-1/2", and a cutting diameter of 1/16". This engraving tool is designed for use on materials like plastics, wood, fiberglass and soft non-ferrous metals. It can be used for detailed engraving work and making fine lines. The tool has a TiN coating for increased tool life and lubricity. It is manufactured in the USA by Micro 100 Tool Corp.
Electron Microscopy Sciences Bent, Fine Point Diamond Scriber
This diamond scriber is the ultimate scribing instrument offering the most precision for the most delicate applications. It is ideal for fine scribing on silicon wafers and glass coverslips under the microscope and for precision scribing and repairing thin film circuits and microcircuits.
The diamond mountings are 0.8 mm diameter with a reduced shank size of 0.5 mm or 0.25 mm diameter, which holds the diamond stylus. The natural diamond has a 60 degree included angle and a 0.12 mm tip radius. The integrated 6.35 mm anodized hexagonal (non-rolling) aluminum handle has a positive finger grip in the form of grooves for easy control and nonslippage. Packaged in a protective plastic tube.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R875 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch and an overall length of 3 inches. The tool features a 135 degree point angle for detail engraving in materials like plastics, soft metals, wood, and fiberglass. It can be used in low horsepower, high speed engraving machines. The tool has a Rockwell hardness of C64-66 for wear resistance. It allows for fine detail engraving work in industrial and craft applications.
Grainger Engraving Tool 7.00mm L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R953 is a high-speed steel engraving tool with a single end cutting edge. It has a shank diameter of 1/8 inch, an overall length of 3 inches, and a cutting diameter of 1/32 inch. This engraving tool is made of M2 high speed steel for wear resistance and has a bright finish. It can machine a variety of materials including steel, aluminum, brass, copper, plastics and wood. The single end cutting edge allows for detail work in cavities and confined areas. This is a high quality engraving tool well-suited for detailed machining in industrial and hobbyist applications.
Grainger Engraving Tool 7/16 L of Cut Carbide
The Micro 100 Engraving Tool Single End 16R921 is a carbide engraving tool with a single end cutting edge. It has a shank diameter of 1/8", an overall length of 2", and a cutting diameter of 0.040". The tool is made of solid carbide and has a right hand spiral flute. It is designed for use on materials like plastics, wood, fiberglass and soft non-ferrous metals. The tool provides a smooth finish and can be used for detail engraving work in applications like sign making, plastic engraving, and metal stamping. With its small cutting diameter, this Micro 100 engraving tool allows for fine detail engraving.
Electron Microscopy Sciences Diamond Tip Scriber with Straight Head, 6" OAL, 60° Tip
Sturdy scribers are in wide use throughout the laboratory. It leaves a permanent marking on virtually any surface, including metal, glass, or plastic. Each Scriber features a hexagonal aluminum pencil shaped body, mill finish, natural diamond tip and protective cap.
OAL: 6"
Tip: 60°
Handle: 0.25" x 5.5"
Shank: 0.125"
Grainger Engraving Tool 3/8 L of Cut Carbide
The Micro 100 Engraving Tool Double End 16R867 is a double-ended carbide engraving tool with a 1/8" shank diameter. It has a 60 degree included angle and a 0.010" tip radius. The overall length is 2-1/2". It is designed for hand engraving in materials like plastics, soft metals, wood, and fiberglass. The double-ended design provides two cutting edges for extended tool life. Made in the USA from solid carbide, this high quality engraving tool is rigid and durable for precision engraving results.
Grainger Engraving Tool 12.00mm L of Cut Carbide
The Micro 100 Engraving Tool Double End 16T032 is a double-ended carbide engraving tool with a shank diameter of 1/8 inch and an overall length of 3 inches. It has a 60 degree included angle and a 0.016 inch tip diameter. The tool features Micro 100's AM300 carbide grade and comes with an AlTiN coating for wear resistance. It is designed for hand engraving in materials like steel, stainless steel, aluminum, brass, and plastics. The double-ended design provides two cutting edges for extended tool life.
Grainger Engraving Tool 1/2 L of Cut Carbide
The Grainger 16T004 engraving tool is a carbide tipped engraver with a 1/8 inch shank diameter and a 60 degree included angle. It has a 0.004 inch tip width and is made of solid carbide for durability and long tool life. The engraver can be used for detail engraving work in metals, plastics, wood and other materials. With its micro grain carbide construction, it provides a sharp cutting edge for clean, crisp detail engraving. The 1/8 inch shank allows it to fit in standard engraving machines. Overall, this is a high quality solid carbide engraving tool well-suited for detailed engraving work.