Combination Ion Selective Electrodes
Oakton by Cole-Parmer In-Line pH Probe, DJ/PVDF/100Ohm RTD/10'; Plug/BNC
This integral, one piece electrode and housing is installation convenience. Choose from single- or double-junction designs with BNC or tinned ends.
Bioanalytical Systems Inc EC COILED PT WIRE AUX ELECT
Electrode, Platinum Wire Auxiliary; Coiled; 0.5mm dia. x 23cm L; With gold-plated connector; Mounted in CTFE cylinder; For use with RDE-1, RDE-2 and bulk electrolysis cell *Does not ship to Puerto Rico
Bioanalytical Systems Inc LC DUAL GC WORK ELECT-CF-3MM
Electrode, Working; For Thin-Layer Flowcell; Dual 3mm Glassy carbon electrode *Does not ship to Puerto Rico
Cole-Parmer Insertion/Submersion pH Probe; SJ/CPVC/100Ohm RTD; Tinned/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176°>F (-5 to 80°>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Hach Company Intellical™ ISENa381 Sodium (Na⁺) Ion Selective Electrode (ISE), 1 m cable
Intellical™ ISENa381 is a digital, combination, sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The electrode measures sodium concentration in water samples. A 59 mL bottle of 0.02 M NH4Cl Electrode Filling Solution is included with the probe.The laboratory version of this ISE is shockproff with its Zeonor plastic body.The Intellical ISENa381 probe is available with a 1 or 3 meter cable and is intended for laboratory use. The ISENa381 is ideal for measuring sodium concentrations in wastewater, drinking water and general water quality applications.
Hach Company Intellical™ ISENH318101 Ammonia (NH₃) Ion Selective Electrode (ISE) with Calibration Reagents Pack
The Intellical™ Ammonia ISE Analysis Package contains all you need to start measuring ammonia (NH3) with your HQD meter instrument: The Intellical™ ISENH3181 Ammonia ISE with 1 m cable, 3-pack of replacement Intellical ammonia membrane modules, one 50 mL bottle electrode filling solution, 500 mL bottles of 1 mg/L, 10 mg/L and 100 mg/L of Hach ammonia nitrogen standard solutions, pack of 100 Hach ammonia ionic strength adjustor (ISA) Powder Pillows, a 50 mL bottle of electrode storage solution, and ISE Basic User Manual.
Hach Company Intellical™ ISENH3181 Ammonia (NH₃) Ion Selective Electrode (ISE), 1 m cable
Intellical™ ISENH3181 is a digital, combination gas-sensing, ammonia ion selective electrode (ISE) with a with a replaceable membrane module, refillable outer body, a non-refillable gel 3M KCl reference with a double junction porous PTFE annular ring and built-in temperature sensor. The electrode measures ammonia concentration in water samples. A 50 mL bottle of 0,1 M NH4Cl Electrode Filling Solution is included with the probe.The laboratory version of this ISE is shockproof with its Epoxy plastic body.The Intellical ISENH3181 probe is available with a 1 or 3 meter cable and is intended for laboratory use. The ISENH3181 is ideal for measuring ammonia concentrations in wastewater, drinking water and general water quality applications.
Bioanalytical Systems Inc EC CGME CTRL DROP MERC ELECT
Electrode; Mercury Drop; BSI Controlled Growth; High overpotential for H ion reduction; High surface reproducibility; Sealed reservoir; Minimal use of metal parts; Three cell modes; Contains mercury *Does not ship to Puerto Rico
Cole-Parmer pH Probe, Refillable, long and thin body
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Bioanalytical Systems Inc EC GC ELECTRODE /RDE-3MM
Electrode, RDE-2 Rotating Disk; Glassy Carbon RDE Tip; 3mm dia. *Does not ship to Puerto Rico
Hach Company Sension+ 9652 Chloride Ion Selective Electrode (ISE) – sensor only
Sension+ 9652 is a half-cell (reference not integrated) chloride ion selective electrode (ISE) with an epoxy body and non-replaceable crystalline membrane selective to chloride ions in solution. It is recommended for use with the Sension+ 5044 reference electrode. The 9652 has a fixed 1 meter cable and BNC connector for laboratory use with the Hach Sension+ MM374 Multimeter. The 9652 is ideal for measuring chloride concentrations in wastewater, drinking water and general water quality applications.