Chromatography Autosampler Vial Caps
Microsolv Technology Corporation Screwcap For 12X32 1000/Cs
Caps, Screw Top, Solid, Single injection use with a thinned penetration point. No Septa required. LCMS compatible, knurled polyethylene, Natural color Caps. For use with with 9-425mm thread, 12x32mm autosampler vials. AQ Brand. 1000/CS.
Microsolv Technology Corporation Caps, Screw Top, with White Silicone Rubber / Natural TEF Septa, fitted in smooth sided, Robo Style, soft polypropylene, Blue Caps. For use with 9-425 thread, 12x32mm autosampler vials. 100/PK.
White silicone rubber and white TEF fitted septa for a lower cost cap. TEF is equally inert as PTFE for standard chromatography.
Microsolv Technology Corporation Caps, Screw Top, with PTFE / Silicone Rubber / PTFE Septa, fitted in "knurled", polypropylene, Green Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Phenomenex Inc Blue, Center Hole, White PTFE / Red Silicone Septa, Slitted
9mm Short Thread Cap AV2200-0
Microsolv Technology Corporation Caps, Screw Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in "knurled", polypropylene, Green Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Chemglass Life Sciences Aluminum Seal, 11mm, Silver, PTFE/Silicone/PTFE
Aluminum Seal, 11mm, Silver, PTFE/Silicone/PTFE. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. The seal with the viton septa is resistant to many aggressive solvents. The 11mm magnetic seal can be used with any instrument where the vials is transported with the use of a magnet.
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit (X Shape) Septa, fitted in smooth, polyethylene, Blue Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments. X Shape Pre-Slit provides a greater target area for needles and are easier to penetrate but do not reseal as well as single slit septa. nofollow">HERE for smaller pack quantities.
Ace Glass, Inc. 11MM GRADED SEALS 11MM GRADED SEALS
11mm quartz graded seals for connecting Pyrex or Kimax borosilicate glass to Quartz glass. Quartz length is 7.6cm, and borosilicate length is 10.2cm.
Chemglass Life Sciences Preassembled Ribbed Closure and Septa, Yellow, 9mm Thread, PTFE/Red Rubber Septa
Preassembled Ribbed Closure and Septa, Yellow, 9mm Thread, PTFE/Red Rubber Septa. Pre-assembled closure and septa minimize contamination from handling. They are convenient and available in a variety of colors with your choice of septa.
Waters Corp Waters Cap, 9 mm, Black polypropylene, PTFE/Silicone Liner
This 9 mm solid black cap features a PTFE/silicone liner, designed for use with 12 x 32 mm vials for sample storage.
- Made from high-quality polypropylene material.
- Designed to securely seal both liquid and solid samples.
- Permanently attached PTFE silicone liner ensures a tight seal.
- Can be safely stored within a temperature range of -40°C to 100°C.
- Compatible with most standard autosamplers.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Septa, bonded in "knurled", polypropylene, Natural Translucent Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS. Click HERE for more information about Soft-Guard™ Septa Technology.
Bellco Glass, Inc. Clr Snap Cap W/PTFE/Sil/PTFE 11mm
Used for snap thread vials. Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. MADE IN THE USA. Size: 11mm Septa material: ptfe
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Partial Pre-Slit (Y Shape) Septa, fitted in "knurled" polypropylene, Blue Caps. For use with 9-425 thread, 12x32mm autosampler vials. Excellent for GC and GCMS. 100/PK.
Partial slit, only in the rubber leaves PTFE to form an evaporation barrier making this a good choice for volatile samples when an autosampler requires a pre-slit Septa.Y shaped partial slit allows for better "resealing" of rubber after initial injection. C