Atmosphere-Supplying Respirator Parts and Accessories
Other parts and accessories include ASR regulators and reducers that regulate the flow of air to respirator head pieces; and ASR hoses and fittings that enable clean, breathable air to be delivered to hoods, helmets, or full facepieces.
Accessories are optional enhancements of ASRs based on wearer preference or environment. Examples include, but are not limited to, variations of lenses and lens covers, climate control tubes, flow control valves, and caps.
Regulatory compliance details can be obtained at the individual product level.
Grainger Panel Retainer Anodized Aluminum
The 80/20 Panel Retainer is made from anodized aluminum and is designed to securely hold panels in 80/20 T-slotted aluminum framing. It features a low profile that sits flush against the panel surface. The panel retainer has a width of 1", a height of 0.31", and a depth of 0.31". It can accommodate material thicknesses from 0.04" to 0.25". The panel retainer comes with the necessary mounting hardware and can be installed by sliding it into the T-slot and tightening the screws to clamp it in place. The anodized aluminum construction makes it durable and corrosion resistant. This panel retainer provides a sleek integrated method to mount panels onto 80/20 framing.
Grainger Reducer 1 x 3/4 in Tube PEX White
The Grainger Approved Reducer is a 3/4" x 1/2" NPT brass reducer bushing that allows you to connect pipes or fittings of different sizes. It is made of brass for durability and has NPT threads on both ends to create a tight seal. This reducer bushing enables you to transition from a larger 3/4" pipe thread to a smaller 1/2" pipe thread. It can handle pressures up to 300 PSI and temperatures up to 250°F. The dimensions are 1-1/4" length x 1" width. This reducer fitting is ideal for reducing pipe sizes in plumbing, HVAC, hydraulic, instrumentation, industrial, and oil & gas applications.
Grainger Fire Bell Gray 10 In.
The Edwards Signaling 24V DC Fire Bell is a signaling device designed for fire alarm systems. It produces a loud, penetrating sound to alert building occupants of a fire emergency. This bell operates on 24V DC and draws 0.18 amps. It features an ABS plastic housing with a red finish and produces a sound output of 84 dB at 10 feet. The bell is weatherproof and suitable for indoor or outdoor use. It can be flush mounted on walls or ceilings. The bell is UL Listed and meets NFPA 72 requirements. With dimensions of 5.5" diameter x 2.75" depth, this fire bell provides an audible signal for fire alarm notification.
OTT Hydromet Adcon - RGPRO - Rain Guage
For the construction of this rain gauge only the best materials were used: anodized aluminum for the body. Solid, cast aluminum for the base. Stainless steel, precision machined, for the tipping bucket. This rain gauge does what the professional needs: measure rain very accurately with a well-balanced double tipping-bucket action. This product needs hardly any maintenance or calibration, an occasional cleaning apart. A stainless spring mounted on the base of the funnel prevents bird droppings from clogging the inlet. Two large openings in the base make sure water runs off smoothly. The orifice of 200cm² is topped by a sharp edged ring to deter birds from landing on it. The Rain Gauge is meant to be mounted on a separate pole, with the orifice approx. 1m above the surface of the soil, in order to meet WMO requirements. Three screws and an integrated bubble level assist in proper positioning/levelling of the device. For all-year operation heated versions are also available.
CELLINK LLC BLUNT NEEDLES 30G,.25",STERILE
Sterile High-Precision Blunt Needles 30G, 50 pieces.0.25 inch
