AirClean™ Systems Identification Workstation Series Ductless Fume Hood

Catalog No. 36-101-8784

Supplier: AirClean™ Systems AC5000

Description

The Airclean Identification Workstation Series Ductless Fume Hood helps protect operator from toxic gases such as methanol, xylene and acetone, residual cyanoacrylate and carbon-based powders used in routine forensic analysis.

• Available in two-speed controller model or with AirSafe™ controller
• AirSafe controller automatically monitors and displays airflow face velocity on alphanumeric display and detects when to change bonded carbon and HEPA filters
• Two-speed model
• Lower sash is outfitted with electromagnetic controller that senses when sash is lifted
• When sash is raised, blower increases velocity to compensate for additional opening
• Structural polypropylene
• Horizontal baffles promotes airflow pattern throughout hood
• High-capacity bonded carbon filter for common forensic chemicals
• HEPA filter removes powders at 99.997% efficiency at 0.3 microns
• Easily cleaned to prevent cross-contamination between cases and evidence
• 30 w integral fluorescent light
• Adequate workspace to allow for superglue tank to be placed inside
• All units operate from standard 110V or 220V electrical outlet
• Optional clear back panel, sides, hanging bar and clips available

Compliance

Meet and exceed OSHA and ANSI Z9.5 standards and guidelines.

Specifications

• Filter Type: HEPA
• Certifications/Compliance: OSHA, ANSI Z9.5
• Dimensions (D x W x H): 66 x 149.8 x 88.9 cm
• For Use With (Application): Protect both the operator and the environment by filtering toxic fumes, vapors, or gases through AirClean Systems proprietary bonded carbon filtration before returning clean air to the room.
• Height (English): 54 in.
• Height (English) Interior: 35 in.
• Height (Metric): 137.16 cm
• Height (Metric) Interior: 88.9 cm
• Voltage: 110/220 V
• Width (English): 60 in.