Electrical Heating Mantles with Controllers
Electrical Heating Mantles with Controllers
Electrical heating mantles with controller include a controller device to regulate the uniform distribution of heat on laboratory glassware such as round-bottomed flasks. With expansive temperature exposure ranges available, the controller is used to increase temperature or maintain a constant process temperature on flask.
Electrical heating mantles with controllers are available in two configurations: as a single unit comprised of a mantle and integrated controller, or as a separate mantle and controller that are sold together. Common uses are boiling, distillation, extraction, and digestion.
Mantles with chamber linings that are soft-sided and flexible in shape can accommodate irregularly shaped glassware like round-bottomed flasks. Others have a more-defined shape that can be used only with straight-sided vessels, like beakers.
Electrical heating mantles may also include a number of safety features:
- Exterior
- Plastic-coated or chemical-resistant metal housing to minimize damage from spills
- Heat-resistant polypropylene housing to protect users from accidental burns
- Electrical systems
- Separate individual power controllers for each recess
- Thermally insulated and grounded
- Automatic shut-off when contact with liquid is detected
- Heating elements are insulated to prevent accidental contact
Electrical heating mantles may include a magnetic stirring feature to simultaneously mix and heat, with places for optional support rods to which clamps and other apparatuses may be attached. Indicator lights can show on-off status or may warn about residual heat after the units are turned off.
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle (°F Controller)
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle provides uniform heat distribution for round bottom flasks.
Fisherbrand™ CMUV Series Controlled Heating Electromantles
Special “V-shaped” design accepts 60° funnels, and accomodates pear-shaped and round bottom flasks
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle (°C Controller)
Fisherbrand™ Lower Hemispherical Heating Mantle and ON/OFF Control Bundle provides uniform heat distribution for round bottom flasks.
BriskHeat™ Lower Hemispherical Heating Mantle with SDC Digital Temperature Controller (°C.)
Excellent alternative to other heaters like bunsen burner with easly programmable temperature controller
BriskHeat™ Lower Hemispherical Heating Mantle with SDC Digital Temperature Controller (°F.)
Excellent alternative to other heaters like bunsen burner with easly programmable temperature controller
United Scientific™ Eco-Heat Heating Mantle


Eco-Heat Heating Mantle evenly heats up to 250 mL of liquid to a max temperature of 380°C.
Chemglass Life Sciences 50000mL Glas-Col Heating Mantle, Series TM, Spherical, 3 @ 1000 Watts

50000mL Glas-Col Heating Mantle, Series TM, Spherical, 3 @ 1000 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. The 50 Liter size is furnished with a terminal box instead of a cord.

Chemglass Life Sciences 22000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 770 Watts

22000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 770 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. All mantles are 115 Volt with the exception of the 72 liter which is 230 Volt and are supplied complete with a 4 foot, 3 wire cord and locking connector. The 50 and 72 Liter sizes are furnished with a terminal box instead of a cord.

Chemglass Life Sciences Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 15 / 20 Liter (Tall), Watts: 500

Heating Mantle, Lower Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 15 / 20 Liter (Tall), Watts: 500. For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. TM Series aluminum housed glass fabric heating mantle with hole centered in the bottom. Mantle is 115 volts and is supplied complete with a separable 4ft 2-wire cord and locking connector.

Chemglass Life Sciences 100mL Glas-Col Heating Mantle, Series TM, Spherical, 80 Watts

100mL Glas-Col Heating Mantle, Series TM, Spherical, 80 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. Mantles are 115 Volt.

Chemglass Life Sciences 72000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 2000 Watts

72000mL Glas-Col Heating Mantle, Series TM, Spherical, 2 @ 2000 Watts. The Glas-Col Series TM spherical flask mantle covers only the flasks bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. The Series TM mantle is available with a bottom hole for flask drain on a special order basis. Terminal box models are available with switches and pilot lights. The 72 liter size mantles arae 230 Volt and are supplied complete with a 4 foot, 3 wire cord and locking connector. The 72 Liter sizes are furnished with a terminal box instead of a cord.

Chemglass Life Sciences 10mL Glas-Col Micro Heating Mantle, Spherical, 20 Watts, 30 Volts

10mL Glas-Col Micro Heating Mantle, Spherical, 20 Watts, 30 Volts. The Glas-Col micro mantle provides precise heat control for small spherical flasks. This mantle is used extensively in analytical work and in purification of research products when only small samples are available. Supplied complete with a 3 foot, 2-wire cord and locking connector. NOTE: Due to the voltage of the micro mantle, a variable voltage transformer is required.

Chemglass Life Sciences 4000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 11 1/4in Depth, 1000 Watts

4000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 11 1/4in Depth, 1000 Watts. This Glas-Col Series O mantle is used with a round bottom cylindrical reaction vessel, CG-1920 and CG-1922, featuring a Duran flange. The mantle covers the bottom and sides of the vessel leaving enough room under the flange to safely remove the reaction vessel clamp while the mantle is in place. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector. The 10,000mL size has two circuits at the listed wattage.

Chemglass Life Sciences Glas-Col Heating Mantle Top, 250mL Capacity, 140 Watts

Glas-Col Heating Mantle Top, 250mL Capacity, 140 Watts. This Glas-Col mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The top is designed for use with CG-11000, CG-12000 or CG-125000 mantles. It protects the flask, the solutions, and the laboratory in these ways: 1) from stray drafts, which would disturb the reflux ratio during fractionation; 2) from flying glass of flask implosions in high-vacuum distillations; 3) from falling objects; and, 4) from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, its elliptical hole accommodates a 1, 2, and 3-neck flask. All mantles are 115 Volts with the exception of the 72 Liter which is 230 Volt, and have a 4 foot, 2 wire cord with locking connector.

Chemglass Life Sciences Glas-Col Heating Mantle Top, 5000mL Capacity, 300 Watts

Glas-Col Heating Mantle Top, 5000mL Capacity, 300 Watts. This Glas-Col mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The top is designed for use with CG-11000, CG-12000 or CG-125000 mantles. It protects the flask, the solutions, and the laboratory in these ways: 1) from stray drafts, which would disturb the reflux ratio during fractionation; 2) from flying glass of flask implosions in high-vacuum distillations; 3) from falling objects; and, 4) from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, its elliptical hole accommodates a 1, 2, and 3-neck flask. All mantles are 115 Volts with the exception of the 72 Liter which is 230 Volt, and have a 4 foot, 2 wire cord with locking connector.

Chemglass Life Sciences 4000mL Glas-col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 11 1/4in Depth, Bottom Drain Opening, 1000 Watts

4000mL Glas-col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 11 1/4in Depth, Bottom Drain Opening, 1000 Watts. This Glas-Col Series O mantle is similar to CG-10007 except mantle is slit lengthwise to a 1 hole in the bottom center with lacing closure to accommodate a cylindrical reaction vessel, CG-1924, with a bottom drain. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector for each circuit. The 10,000mL size has two circuits at the listed wattage.

Chemglass Life Sciences Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 50 Liter, Watts: 2 @ 1250

For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. Glass fabric heating mantle with a lengthwise slit held together with a hook and lace closure. Mantle is 115 volts is supplied complete with a separable 4ft 2-wire cord and locking connector. Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 50 Liter, Watts: 2 @ 1250.

Chemglass Life Sciences 10,000mL Glas-col Heating Mantle, Series O, Cylindrical, 8 7/16in ID x 15 1/8in Depth, Bottom Drain Opening, 2 @ 1000 Watts

10,000mL Glas-col Heating Mantle, Series O, Cylindrical, 8 7/16in ID x 15 1/8in Depth, Bottom Drain Opening, 2 @ 1000 Watts. This Glas-Col Series O mantle is similar to CG-10007 except mantle is slit lengthwise to a 1 hole in the bottom center with lacing closure to accommodate a cylindrical reaction vessel, CG-1924, with a bottom drain. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector for each circuit. The 10,000mL size has two circuits at the listed wattage.

Chemglass Life Sciences 2000mL Glas-col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 6 3/4in Depth, Bottom Drain Opening, 650 Watts

2000mL Glas-col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 6 3/4in Depth, Bottom Drain Opening, 650 Watts. This Glas-Col Series O mantle is similar to CG-10007 except mantle is slit lengthwise to a 1 hole in the bottom center with lacing closure to accommodate a cylindrical reaction vessel, CG-1924, with a bottom drain. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector for each circuit. The 10,000mL size has two circuits at the listed wattage.

Chemglass Life Sciences 2000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 6 3/4in Depth, 650 Watts

2000mL Glas-Col Heating Mantle, Series O, Cylindrical, 6 5/16in ID x 6 3/4in Depth, 650 Watts. This Glas-Col Series O mantle is used with a round bottom cylindrical reaction vessel, CG-1920 and CG-1922, featuring a Duran flange. The mantle covers the bottom and sides of the vessel leaving enough room under the flange to safely remove the reaction vessel clamp while the mantle is in place. Mantle is glass fabric, 115 volts, and is supplied with a separable 4 foot, 2 wire extension cord with locking connector. The 10,000mL size has two circuits at the listed wattage.

Chemglass Life Sciences Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 10 Liter, Watts: 720

For use with CG-1924 and CG-1972 unjacketed cylindrical reaction vessels. Glass fabric heating mantle with a lengthwise slit held together with a hook and lace closure. Mantle is 115 volts is supplied complete with a separable 4ft 2-wire cord and locking connector. Heating Mantle, Upper Portion, Unjacketed Cylindrical Vessel, Reactor Capacity: 10 Liter, Watts: 720.

Chemglass Life Sciences 1000mL Glas-Col Heating Mantle, Series M, Spherical, 380 Watts

1000mL Glas-Col Heating Mantle, Series M, Spherical, 380 Watts. The Glas-Col Series M mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. Like the series TM, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. The internal operating temperature is 450 C. Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing and requires a support such as CG-11004 through CG-11008. All mantles are 115 Volt and are supplied with a detachable 4 foot, 3 wire cord.

Chemglass Life Sciences Glas-col Mantle Tripod Support for Series inMin, Mantle Size 12000mL, 14in Fixed Height, 425mm ID

Glas-col Mantle Tripod Support for Series inMin, Mantle Size 12000mL, 14in Fixed Height, 425mm ID. Glas-Col tripod support sits on the floor or a bench to hold a Series M mantle ranging in sizes from 3 to 22 liters. Mounting holes are in the foot of each leg for securing to floor or bench. Support is painted gray and shipped unassembled.

Chemglass Life Sciences Glas-col Mantle Tripod Support for Series inMin, Mantle Size 3000mL, 14in Fixed Height, 259mm ID

Glas-col Mantle Tripod Support for Series inMin, Mantle Size 3000mL, 14in Fixed Height, 259mm ID. Glas-Col tripod support sits on the floor or a bench to hold a Series M mantle ranging in sizes from 3 to 22 liters. Mounting holes are in the foot of each leg for securing to floor or bench. Support is painted gray and shipped unassembled.

Cole-Parmer Electrothermal EM1000/CEX1 Electromantle, 1000 mL Capacity, 115 VAC
Electrothermal Electromantle, 1000-mL capacity, 115 VAC
