Thermocouples and Furnace Accessories
Chemglass Life Sciences 1/8" Dia x 6" Long PFA Coated Thermocouple Probe, Type "K"
1/8" Dia x 6" Long PFA Coated Thermocouple Probe, Type "K". For use with Temperature Controllers CG-15001, CG-3200, CG-3202, CG-3404, CG-3206, CG-3209, and CG-3210. Thermocouples have a standard male plug (OST) and are all PFA COATED.Maximum Probe Temperature Based on Coating- FEP is 200¿C and the Black PFA is 250¿C
Chemglass Life Sciences 1/4" Dia x 12" Long PFA Coated Thermocouple Probe, Type "J"
1/4" Dia x 12" Long PFA Coated Thermocouple Probe, Type "J". For use with Temperature Controllers CG-15001, CG-3200, CG-3202, CG-3404, CG-3206, CG-3209, and CG-3210. Thermocouples have a standard male plug (OST) and are all PFA COATED.Maximum Probe Temperature Based on Coating- FEP is 200¿C and the Black PFA is 250¿C
Cole-Parmer Digi-Sense Miniature Type-K Thermocouple Male Connector, 2 Pin, 5Pk
Miniature connectors are suited for small wires and mineral insulated cables. Glass-filled nylon construction with hollow pins and molded barriers prevent short circuit. Secure thermocouple wire into positive/negative terminals with screws. Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue.
Cole-Parmer Digi-Sense Thermocouple Wire Type K 16-Gauge, Enamel/Glass Braid Insulation
Wire comes in 16-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.
Sigma Aldrich Fine Chemicals Biosciences KrytoxR 240AC lubricant pk1EA
fluorinated grease. Multi-purpose lubricant chemically inert non-flammable.Useful temp range -30 to 550 fInsoluble in most common solvents
Chemglass Life Sciences Needle Tip Thermocouple, PTFE Coated, 3.5" Needle Length, Type K (YELLOW)
Needle Tip Thermocouple, PTFE Coated, 3.5" Needle Length, Type K (YELLOW). Designed for use for small volumes, these 17 gauge hypodermic needle thermocouples can be inserted through septa into a reaction. They are PTFE coated and sealed at the end for liquid tight applications. Available in 3-1/2 or 7 inch lengths with 72 inches of PTFE coated extension wire.Please Note: Maximum Temperature for PTFE Coated Needle probes is 180¿C. They should only be inserted through rubber septa.
Omega Engineering, Inc. 72INT TYPE THERMOCOUPLE 5PK
This item has a minimum order quantity of 3 per supplier requirements.
Uline Heating Element Cover For Tabletop Impulse Sealers With Cutter
Heating Element Cover For Tabletop Impulse Sealers With Cutter
Foxx Life Sciences EZBio Ultra Maxpure Sterilizing Grade Capsule Filter, 0.2µm Pore Size, Double-Layer PES, 6.5 ft² EFA, 0.25" Hose barb Inlet/Outlet, 10" Height, Silicone O Ring, Gamma Irradiatable, Autoclavable, Non Sterile, 1/CS
EZBio Ultra Capsule Filters are sterilizing-grade capsule filters engineered for exceptional control of microorganisms in sterile fluid applications. Available in sizes from 2” to 40”, these filters offer versatile inlet/outlet options—including hose barbs, female NPT & sanitary connections—for seamless integration in bioprocess & pharma
Features
Retention: 100% of Brevun- dimonas diminuta (ATCC 19146) at ≥10^7 CFU/cm² EFA
Ultra-pure polypropylene housing & asymmetric hydrophilic PES membrane ensure low protein binding & minimal extractables
Multi-pleated configuration maximizes surface area for enhanced flow & durability
Compliant with FDA CFR 21 & USP Class VI Standards
Tested & comply with the requirements of USP <665>
Autoclavable: 20 times for 1 hour@257°F & ≤ 3psi
Gamma Irradiatable: 27.5–56 kGy
Application
Buffer & sample prep
Cell culture media prep, protein purification
High-purity chemical filtration