Combination Stirring Hotplates
Yamato Scientific America, Inc. Yamato Magnetic Stirrer with Hot Plate, Max hot plate temp 250°C. Stirring rate up to 1500 rpm, 115V/220V.
Six point controllable magnetic stirrer with chemical resistant ceramic coating hot plate. Rotation and heating can be adjusted individually. Equipped with circuit protector. Stirring rate 300~1500rpm. Stirring capacity 100~2000 ml x 6 pcs. and maximum hot plate temp of 250°C.
Electron Microscopy Sciences SUPER-NUOVA™ Hot Plate Hot Plate Ceramic Top, 120 V
Digital hote plate features a rugged low profile cast aluminum body provides stability and durability and a warning system that deters accidental contact with hot surface. The Remote probe allow for accurate reading of solution temperature to 0.1°C for temperature below 100°C. A user-adjustable over-temperature protection prevents runaway temperature conditions. Seamless reflective easy-to-clean, alkali/acid resistant white ceramic top.
Surface: 7.25"x7.25"
Electron Microscopy Sciences SUPER-NUOVA™ Hot Plate Ceramic Top, 240 V
Digital hote plate features a rugged low profile cast aluminum body provides stability and durability and a warning system that deters accidental contact with hot surface. The Remote probe allow for accurate reading of solution temperature to 0.1°C for temperature below 100°C. A user-adjustable over-temperature protection prevents runaway temperature conditions. Seamless reflective easy-to-clean, alkali/acid resistant white ceramic top.
Surface: 7.25"x7.25"
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 220-240 V, 50 to 1200 RPM, 7.25" x 7.25 heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 7.25" x 7.25
Footprint: 8.2" x 13"
Height: 3.8"
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Aluminum Top, 220/240 V, 7.25" x 7.25" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms & can be used at 0-27°C w/ 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control & stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring & goes up slowly when rotated slowly & faster when rotated faster. Adjustable 1 °C & 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point & actual speed to a printer or computer. Supplied w/ 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, & a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Durablle aluminum top for uniform heat distribution.Heating surface: 7.25" x 7.25"RPM: 50 to 1200Amps: 3.0Wattage: 710
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 120 V, 50 to 1200 RPM, 7.25" x 7.25" heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 7.25" x 7.25"
Footprint: 8.2" x 13"
Height: 3.8"
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Aluminum Top, 120 V, 7.25" x 7.25" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms & can be used at 0-27°C w/ 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control & stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring & goes up slowly when rotated slowly & faster when rotated faster. Adjustable 1 °C & 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point & actual speed to a printer or computer. Supplied w/ 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, & a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Durablle aluminum top for uniform heat distribution.Heating surface: 7.25" x 7.25"RPM: 50 to 1200Amps: 5.6Wattage: 670
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Ceramic Top, 120 V, 10.5" x 10.5" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms and can be used at 0-27°C with 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control and stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring and goes up slowly when rotated slowly and faster when rotated faster. Adjustable 1 °C and 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point and actual speed to a printer or computer. Supplied with 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, and a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Alkali/acid resistant white ceramic top.Heating surface: 10.5" x 10.5"RPM: 50 to 1200Amps: 10.1Wattage: 1210
Electron Microscopy Sciences Corning Digital PC-420 Hot Plate/Stirrer, 220 V, 60-1150 RPM
Pyroceram glass-ceramic stirring hot plates features a microprocessor with digital display that regulates heating and stirring. Consistent and repeatable temperature is maintained from 25 °C up to 550 °C and is adjustable in 5 °C increments. Display blinks until temp is reached and LED HOT TOP icon lights up when top plate is over 60°C and separate temp sensor provides power cutoff if unit overheats.
An optional external temp controller is available for inside the vessel and will shut off unit when is not in liquid. Stirring speed range is from 60-1150 RPM. Stronger, larger magnet improves stir bar coupling combined with automatic up speed adjustment minimizes decoupling. The two piece casting design deflects spills away from electronic and includes a built in mount for an optional 18" support rod. UL and cUL approved.
Heating surface: 10" x 10"
Range: 25-550°C
RPM: 60-1150
Weight: 11.5 lb
Footprint: 15.8 x 10.6"
Electron Microscopy Sciences PC620 Hot Plate/Stirrer, 120 V, 60-1150 RPM
Pyroceram glass-ceramic stirring hot plates features a microprocessor with digital display that regulates heating and stirring. Consistent and repeatable temperature is maintained from 25 °C up to 550 °C and is adjustable in 5 °C increments. Display blinks until temp is reached and LED HOT TOP icon lights up when top plate is over 60°C and separate temp sensor provides power cutoff if unit overheats.An optional external temp controller is available for inside the vessel and will shut off unit when is not in liquid. Stirring speed range is from 60-1150 RPM. Stronger, larger magnet improves stir bar coupling combined with automatic up speed adjustment minimizes decoupling. The two piece casting design deflects spills away from electronic and includes a built in mount for an optional 18" support rod. UL and cUL approved.Heating surface: 10" x 10"Range: 25-550°CRPM: 60-1150Weight: 11.5 lbFootprint: 15.8 x 10.6
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Ceramic Top, 220/240 V, 10.5" x 10.5" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms and can be used at 0-27°C with 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control and stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring and goes up slowly when rotated slowly and faster when rotated faster. Adjustable 1 °C and 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point and actual speed to a printer or computer. Supplied with 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, and a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Alkali/acid resistant white ceramic top.Heating surface: 10.5" x 10.5"RPM: 50 to 1200Amps: 5.7Wattage: 1365
Electron Microscopy Sciences Nuova™ Low End Hot Plates, 220/240 V, 10.25" x 10.25" heating surface, 540°C max range
This hot plate features a corrosion resistant heating surface, low profile, & 24 month warranty. Durable & long lasting w/ a die cast aluminum case. Corrosion resistant w/ a porcelain coated stainless steel top. The topside drip edge protects internal components in case of spillage. Integral ring stand holder accomodates 0.5" (13 mm) support rod. Accomodates up to 20 lb (9.1 kg) loads. Recommended for use w/ glass vessels only. All unit included "PTFE" coated stir bar. Demand-Type thermostatic temperature control giving it excellent temperature stability +/-5.0 degree C (9 degF) at 371 °C (700 degF). Embedded heating elements – uniformity transfer heat to the top plate.Perfect choice for warming applications w/ low temperature control of 35 °C.All units operating temperature range is 38 – 371 degree C (100 –700 °F).Heating surface: 10.25" x 10.25"Range: 540°C maxAmps: 3.5Wattage: 840Footprint: 16.2 x 11.3"
Cole-Parmer RT 5 Position Stirring Hot Plate, 115V
Wear-free/maintenance-free magnetic coils for consistent and silent operation. Stir consistently in all positions. Adjust speed in 10-rpm increments-speed remains constant.
