Environmental Chambers
Darwin Chambers Company Triple Door Environmental Chamber 66 cu. ft.
The KB084 is a 76.2 cubic feet triple door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior and stainless steel floor with coved corners. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Darwin Chambers Company Triple Door Heat Humidity Chamber 66 cu. ft.
The HH084-SS is a 76.2 cubic ft triple door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Single Door Heat Humidity Chamber 21 cu. ft.
The HH030 is a 23.9 cubic ft single door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Memmert Constant Climate Chamber HPP110Eco. 110L - 115V, Stainless Steel Construction with TwinDISPLAY digital controller
Memmert Constant Climate Chamber (HPPeco) - this programmable model is the 115 volt, Peltier-technology seamlessly heats and cools, with TwinDISPLAY digital controller. Includes (2) Stainless Steel Grid Shelves, Atmocontrol Software, Atmocontrol Manual, Operation manual, Calibration Certificate and Power Cord - energy efficient, precise. Setting temperature range +5C to +70C. Setting humidity range 10%RH - 90%RH. Internal dimensions 560/480/368-W/H/D mm.
Darwin Chambers Company CHAMBER INSECT 70 CU FOOT
The IN084 is a 76.2 cubic foot triple door insect rearing chamber. Temp range is 18 to 60 deg C. Optional humidity range ambient to 90%. Humidity and lighting options not included. Must be ordered separately. This unit comes w/ 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. The 7 year warranty on cooling components & the ability of our chambers to maintain temp. even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Darwin Chambers Company Bench Top Insect rearing chamber 29.75""W x 23""D x 27.75""H
The IN011 is 11.6 cubic feet a benchtop insect rearing chamber. Temperature range is 12°C to 50°C. Optional humidity range ambient to 90 percent. Humidity and lighting options not included. Must be ordered separately. This unit comes with 2 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Darwin Chambers Company Stability Chamber 29.75""W x 23.125""D x 29.75""H.
The PH011 is a 11.6 cubic ft benchtop stability chamber that can be stacked w/ optional racking. These Chambers are designed for performance specifications exceeding FDA & ICH requirements. Temperature range is 12°C to 50°C degrees C. Humidity Range ambient to 90 percent. This unit comes w/ two stainless steel shelves. The chamber interior provides a 304 series stainless steel interior & door liner, corrosion-resistant; also heavy-gauge powder-coated, galvanized steel exterior. The 7 year warranty on cooling components & the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The PH Series chambers utilize less energy than comparable stability chambers.
Darwin Chambers Company Single Door ICH Stability Chamber 21 cu. ft.
The PH030 is a 23.9 cubic ft single door stability chamber. These Chambers are designed for performance specifications exceeding FDA & ICH requirements. Temperature range is 18°C to 50°C degrees C. Humidity range ambient to 90 percent. This unit comes w/ three pvc coated shelves. The chamber interior provides aluminum side walls & back, stainless steel floor & ceiling. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. The 7 year warranty on cooling components & the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The PH Series chambers utilize less energy than comparable stability chambers.
Darwin Chambers Company Benchtop Heat Humidity Chamber 9 cu. ft.
The HH011 is a 11.6 cubic ft benchtop heated/humidified incubator that can be stacked w/ optional racking. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ two stainless steel shelves. The chamber provides a 304 series stainless steel interior & door liner, corrosion-resistant; also heavy-gauge powder-coated, galvanized steel exterior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Single Door Environmental Chamber 21 cu. ft.
The KB030-SS is a 23.9 cubic feet single door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Darwin Chambers Company Double Door Heat Humidity Chamber 47 cu. ft.
The HH055 is a 50 cubic ft double door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 6 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Triple Door Environmental Chamber 66 cu. ft.
The KB084-SS is a 76.2 cubic feet triple door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
