Standard Incubators
Bellco Glass, Inc. Bench-Top Glass Door Inc, 115V
The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having toopen the door limiting possible contaminationproblems and temperature fluctuations. Theconvenient interior accessory outlet allows theuse of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakersand Magnetic Stirrers. Optional stainless steel shelf createsadditional space for storing cell culture plates and flasks.. MADE IN THE USA
Sheldon Manufacturing Inc LABORATORY INCUBATOR 6CUFT
LABORATORY INCUBATOR, 6 CU FT, SS INTERIOR, INNER GLASS DOOR, OUTLET, ACCESS PORT, 115V. SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded. More information available at www.shellab.com
Electron Microscopy Sciences Advanced Protocol Incubator Model 51028068, 120 V, 178 L chamber
Dual convection for application versatility-fan speed adjustable from 0 to 100%.
Internal socket allows the use of equipment, such as shakers or stirrers, inside the unit.
Easy to clean, corrosion-resistant stainless-steel interior (AISI 304).
Broad temperature range from 5 degree C above ambient to 105 degree C-suitable for drying applications.
Temperature uniformity of +/- 0.6 (Fan off) and between +/-0.2 degree C and +/- 0.4 degree C (Fan full speed) (measured at 37 degree C).
Temperature stability of +/- 0.1 degree C (at 37 degree C).
Intuitive user interface for setting temperature.
Large, easy to read vacuum fluorescent display.
Internal glass door allows sample viewing without impacting temperature. Exceptionally small footprint. Convection Technology: Dual Convection.
Chamber: 178 L
Memmert Natural Convection Incubator IN 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Natural Convection Incubator IN 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Natural Convection Incubator IN 75, 115 Volt, 50/60Hz, Maximum temperature range to 80C
Memmert Natural Convection Incubator IN 75, 115 Volt, 50/60Hz, Maximum temperature range to 80C
Memmert Forced Circulation Incubator IF 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Forced Circulation Incubator IF 110 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Yamato Scientific America, Inc. Yamato 143L Incubator with window, Refrigerant, 115V
Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Operating temperature range: -10~ + 50° C
Being Scientific BIT-120 - 4.3 Cuft (123 Liters), Temperature Range : Amb +5°C - 80°C
Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products assuring piece of mind to our customers.
Being Scientific BIC-120C - 4.2 cu ft (120 liters),14 - 176 ℉ , -10 - 80℃
BEING Cooling Incubators allow users to carry out applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand (BOD) testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Each cooling incubator uses environmentally friendly refrigerants that ensure rapid cooling does not come at the expense of the environment.
Yamato Scientific America, Inc. Yamato 286L Incubator with window, Refrigerant, 115V
Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Operating temperature range: -10~ + 50° C
Bellco Glass, Inc. Double Window Roll-In Incubator, 115V
Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature.. MADE IN THE USA
Research Products International Corp Digital Lab Incubator
Digital accuracy and performance incubators offered at an affordable price. Full PID microprocessor controller maintains temperature accuracy within 1°C. Innovative built in tracking system stores maximum temperature deviation from set point in 0.1° increments. This feature acts as a paperless chart recorder to confirm stability or indicate any system malfunction. Supplied complete with one fixed and one adjustable chrome plated shelf.
Additional features include:
- Digital read out in 0.1°C or F
- Self diagnostic software
Percival Scientific Biological Incubator, I41LLVLH6, 37.2 cu. ft., horizontal and vertical IncuWhite LED lights, 4 tiers, pan-type hum., dehum., adv. RH sensor, 4-44° C ±0.5°, IntellusUltra control
The I41LLVLH6 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 220 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and adv. sensor tightly control humidity. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.