Standard Incubators
Biotang Inc Digital incubator for 24-Gel Cards in racks at 37deg.C.Digital interface screen for control and visualization of remaining incubation time and real temperature for each zone.
Digital incubator for 24-Gel Cards in racks at 37deg.C.Digital interface screen for control and visualization of remaining incubation time and real temperature for each zone.
Yamato Scientific America, Inc. Yamato 318L Incubator with communication port, General Purpose, 115V
Economical general purpose 318L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C
Hach Company Incubator, Hach portable, 12 VDC, 30 - 50 °C (± 0.5 °C)
Field-ready unit can be used with a variety of power sources for reliable, accurate incubation. Operating range: 0 - 40 °C. Accuracy: ±0.5 °C @ 37 °C. Power Source: 12 VDC via vehicle cigarette lighter socket connection. Other Power Source options include 12 VDC rechargeable battery (12 hours of operation @ 37 °C @ 20 - 25 °C ambient) and 115/230 VAC Battery Eliminator. Capacity: 6 P/A bottles or 39 MPN tubes or 42 50 mm petri dishes. External Dimenstion: 30.5 x 30.5 x 25.4 cm (12 x 12 x 10"). Temperature Range: 5 - 50 °C ambient.
Alkali Scientific MyTemp 65L H2265-HC Lab Incuba
The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60C The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications A large digital display allows for visualization of the chamber temperature and the remaining incubation time while an internal light is included for improved visualization of the chamber In addition a built in internal outlet can be used to provide power to small instruments such as shakers rockers etc With forced air technology and stainless steel inner construction uniform heat transfer is ensured throughout the internal chamber When set for sub-ambient temperatures the powerful compressor is activated quickly cooling the chamber to the desired temperature With an exterior height of 39 inches (100cm) the incubator is designed to be floor-standing yet is also compact enough for bench-use (Not recommended for use on benchtops taller than 32/81cm) The inst
Memmert Forced Circulation Incubator IF 55 Plus, 115 volt, 50/60 Hz. Maximum temperature range to 80C
Memmert Forced Circulation Incubator IF 55 Plus, 115 volt, 50/60 Hz. Maximum temperature range to 80C
Percival Scientific Biological Incubator, I36LLVL, 29.7 cu. ft., horizontal and vertical IncuWhite LED lighting, 4 tiers, 4-44° C ±0.5°, IntellusUltra controller
The I36LLVL incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 230 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Chemglass Life Sciences 3-Port Sparger Assy with Frit for 15L VSA Vessels
Our 3-port sparger assemblies are designed for gentle aeration using a 10 micron frit invertical side arm (VSA) vessels.The frit is removable for easy cleaning.These assemblies are constructed of 316L stainless steel, electro-polished to a 20Ra finish or better and include a blue polypropylene GL-45 open top cap and white silicone gasket.
Darwin Chambers Company Single Door Incubator 21 cu. ft.
The HT030-SS is a 23.9 cubic ft single door heated incubator. Temperature range is 5°C above ambient to 50°C degrees C. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Chemglass Life Sciences 3-Port Sparger Assy with Holes for 6L VSA Vessels
Our 3-port sparger assemblies with drilled holes, 0. 040” spaced 1/2” apart, and hose barbs are designed for vigorous aeration invertical side arm (VSA) vessels.These assemblies are constructed of 316L stainless steel, electro-polished to a 20Ra finish or better and include a blue polypropylene GL-45 open top cap and white silicone gasket.
Yamato Scientific America, Inc. Yamato 159L Incubator with window, General Purpose, 115V
Economical general purpose 159L natural convection incubator with observation window. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C
Caron Products And Services Humidified Incubator, 10 cu. ft., Temp & RH
10 ft3 (283 L) Humidified Incubator offers temperature (10C above ambient to 70C) and humidity control (ambient to 98% RH). Ideal for a wide range of applications. Delivers dependable performance and reliable results. Includes earth-friendly and customer convenient features. 115V, 60 Hz.
Percival Scientific Biological Incubator, I36VLH6, 29.7 cu. ft., vertical IncuWhite LED lighting, 5 tiers, pan-type humidifier, dehum. and advanced RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I36VLH6 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 120 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and adv. sensor tightly control humidity. Five white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.