Standard Incubators
Percival Scientific Biological Incubator, I30LH1, 9.6 cu. ft., horizontal IncuWhite LED lighting, 3 tiers, pan-type humidifier and electronic RH sensor, 5-44° C ±0.5°, IntellusUltra controller
The I30LH1 incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 125 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A pan-type humidifier and standard humidity sensor provides additive humidity.Three white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I41NLH1, 37.2 cu. ft., non-lighted, 6 tiers, pan-type humidifier and electronic RH sensor, 2-44° C ±0.5°, IntellusUltra controller
The I41NLH1 incubator is frequently used for C. elegans, nematodes, yeast/fungi, insects, bacteria and BOD. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A pan-type humidifier and standard humidity sensor provides additive humidity.Six white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I36LLVLH3, 29.7 cu. ft., horizontal and vertical IncuWhite LED lights, 4 tiers, pan-type hum., dehum., elec. RH sensor, 4-44° C ±0.5°, IntellusUltra control
The I36LLVLH3 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 230 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Memmert Forced Circulation Incubator
Memmert Forced Circulation Incubator IF 160 Plus Incubator, 115Volt Maximum temperature 80C
Memmert Natural Convection Incubator
Memmert Natural Convection Incubator IN 450, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Natural Convection Incubator
Memmert Natural Convection Incubator IN 30,115 volt, 50/60 Hz, maximum temperature range to 80C
Darwin Chambers Company NQ09 PORTABLE INCUBATOR
NQ09 Interior dimensions: 10.6" L x 7.5" W x 5.2" H. Weight: 4.7 lbs. NQ Series have several uses, such as: Blood sample transport, Water treatment research, and Maintaining microbiological cultures for cell research. Exterior construction: Double-wall foam insulation of high-density polyethylene, Foamed-in-place, Closed-cell insulation. Interior: Molded poly with coved floor for ease of cleaning. TEMP RANGE: AMBIENT +5C to 37C,1.0C TOLERANCE - CONTROL READOUT: ACTUAL AND SET-POINT VALUES - SENSOR: TYPE T THERMOCOUPLE - CONTROLLER: MICROPROCESSOR BASED - CALIBRATION CAPABILITY: 1.0C OFFSET INCREMENTS - CORD LENGTH: 6FT
Air Science Usa Base Stand 48" Wide for Vertical Laminar Flow Cabinet
Base Stand, (Metal), Open Frame, Adjustable Leveling Feet, Fixed height. Fits VLF-48 Models
Memmert Natural Convection Incubator
Memmert Natural Convection Incubator IN 260, 115 volt, 50/60 Hz, maximum temperature range to 80C
Chemglass Life Sciences Incubator, Digital, myTemp 65HC, Heating and Cooling, 120V
Accurate Temp. Control from 0 to 60 ° C S. S. Internal Chamber (65L) with Light Internal Worldwide-Universal Outlet Competitively Priced with "Heat Only" Incubators Uniquely Sized for Floor-Standing Use or on Bench Tops less than 32" Tall. The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60 ° C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc. With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickl
Darwin Chambers Company Double Door Thermoelectric Incubator, 52.63"""" D x 33.75"""" W x 77.75""""H
The TE055-SS is a 50 cubic feet double door laboratory incubator. Temperature range is 20°C to 50°C. This unit comes with 6 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless interior. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Percival Scientific Biological Incubator, I41VLH3, 37.2 cu. ft., vertical IncuWhite LED lighting, 5 tiers, pan-type hum., dehum. and electronic RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I41VLH3 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 120 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and standard sensor maintain optimal humidity. Five white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.