Bath Accessories
Sigma Aldrich Fine Chemicals Biosciences PierceASeal foilTM heat se
Pierceable foil seal with good solvent resistance.features foil high solvent resistance including DMSO non-peelable multiple sealing/re-sealing permissible easy sealing surface identification pierceable.Compatibility Polypropylene (PP) Polystyrene (PS). Seal integrity range -20C to 120C.Application PCR compound storage sample shipping.
Chemglass Life Sciences M16 x 1 Female to 1/2 Male NPT Fitting
ADAPTERS, M16 X 1 FEMALE TO 1/2 MALE NPT FITTING, HUBER CIRCULATOR FITTINGS, STAINLESS STEEL
Chemglass Life Sciences Triple Insulated Hose, 6ft Length
Triple Insulated Hose, 6ft Length. For connection of circulators to Chemglass reactors. Hoses are flexible stainless steel tubing, insulated with fiberglass and silicone. Temperature range -80 to 200° C. Both ends have a M16 x 1 Female fitting for attachment directly to our inlet/outlet connections see CG-1969-A. Adapters are available for connection to most circulators.PLEASE NOTE: TWO HOSES ARE REQUIRED PER REACTOR.
Crescent Chemical Co Inc SILICONE DC 200 FLUID; 100 CST
Silicone DC 200 fluid; 100 cst pract. Dimethyl siloxane polymer (methyl silicones).In terms of SI-units: 1 cst = 10-6m2s-1Density (25 °C) 0.962 - 0.968 Size - 500G Storage Conditions - +15 °C TO +30 °C Catalog Number - 35135.01
Chemglass Life Sciences 16L Lab Armor Beads, Shipped in (4) 4L Containers
These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20 ° C to 8 ° C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180 ° C. However, product may be used up to 300 ° C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for s
Chemglass Life Sciences 0.75L Lab Armor Beads
0.75L Lab Armor Beads. These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20C to 8C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180C. Product may be used up to 300C without loss in thermal performance, but product fluidity may be reduced.
Chemglass Life Sciences 20L Lab Armor Beads, Shipped in (5) 4L Containers
These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20 ° C to 8 ° C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180 ° C. However, product may be used up to 300 ° C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for s
Julabo USA Inc IC50 Immersion Cooler -50C
Immersion Cooler JULABO IC50 115V/60Hz R290 Refrigerant -50 100 C Cooling 0 45kW at 20C 0 32kW at 0C 0 16kW at -20C 0 04kW at -40C Cooling cylinder 3 9cm x 2cm diameter on 47 2 cm tether 9 1x 17 3 x 15 7 in 47 4lbs The specification of the working temperature range above the ambient temperature corresponds to the maximum permissible temperature in the application for which the immersion cooler is approved The lowest temperature of the working temperature range corresponds to the minimum temperature that the probe reaches at its surface
Julabo USA Inc IC50E Immersion Cooler -50C
Immersion Cooler JULABO IC50E 115V/60Hz R290 Refrigerant -50 100 C Cooling 0 45kW at 20C 0 32kW at 0C 0 16kW at -20C 0 04kW at -40C Cooling cylinder 3 9cm x 2cm diameter on 47 2 cm tether 9 1x 17 3 x 15 7 in 47 4lbs OLED UI with timer USB-C port for data capture External Pt100 sensor for set point temperature control The specification of the working temperature range above the ambient temperature corresponds to the maximum permissible temperature in the application for which the immersion cooler is approved The lowest temperature of the working temperature range corresponds to the minimum temperature that the probe reaches at its surface
Julabo USA Inc PRESTO A30 Circulator NRTL
JULABO PRESTO Highly Dynamic Temperature Control Systems for highly precise temperature control of external applications Systems offer rapid heating and cooling rates The hydraulically sealed heat exchanger design affords a wide working temperature range without changing fluids All units feature a color TFT touch screen interface for unit operation external integration and programming Instruments cover a working temperature range of -85 to 250C Up to three user levels with password management Systems incorporate USB (host and device) Ethernet SD-card slot RS232 port stand-by input and Pt100 external temperature sensor port The graphite bearing centrifugal pressure pump is lubricated by the bath fluid All models (except for A30) can operate under pressure control to safeguard pressure sensitive applications (such as jacketed glass reactors) Air and water-cooled versions available Additional accessories available
Julabo USA Inc 10L Thermal P60 bath fluid -60…+250 °C in PRESTO only!
Bath fluid, Thermal P60, 10 L, For use in PRESTO highly dynamic temperature control systems only! Thermal P60 is a clear 5 cSt silicone fluid rated for use in JULABO PRESTO units only with a working temperature range of -60…+250 °C. This temperature range is only valid when used in PRESTO systems! The internal PRESTO cold oil overlay technology enables for safe operation above the fluid flashpoint.
Research Products International Corp Stainless Steel Utility Bath Tray
Stainless steel laboratory products are efficiently designed for easy cleaning and quick sterilizing. Items will not chip, break, or corrode. All items are produced from heavy gauge stainless steel for added durability.
Dynalene Heat Transfer Fluids DYNALENE HC-50 5 GALLONS
Dynalene HC, is a Potassium Format/water solution that is non-toxic, non-flammable and non-hazardous. This fluid is engineered to provide high performance heat transfer at low temperatures with a freezing point below -57 F. The Dynalene HC is available to serve a wide range of applications.