Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. Flask, cylindrical, jacketed, 250mL, 60mm Duran flange, CAPFE™;7855-878 O-ring sold separately
Flask, cylindrical, jacketed, 250mL, 60mm Duran flange, CAPFE™;7855-878 O-ring sold separately
Ace Glass, Inc. 2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. 20mL 24/40 Barrett moisture test receiver, jacketed sidearm, PTFE plug
20mL Barrett type moisture test receiver with 24/40 standard taper joints for use in determining the water content in petroleum and bituminous material. Features a jacketed side arm and is supplied with 1:5 solid PTFE stopcock plug.
Ace Glass, Inc. 3000mL pressure vessel body, one-piece, jacketed, #25 center, (4) #15, (1) #7 side necks, round bottom, 28/15 O-ring ball joints on inlet/outlet
3000mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (4) #15 and (1) #7 side necks, and a 28/15 o-ring ball joint on the inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.
Ace Glass, Inc. 2000mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve and 28/15 ball joint bottom outlet, 28/15 ball joints on jacket inlet/outlet.
2000mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve and 28/15 ball joint bottom outlet, 28/15 ball joints on jacket inlet/outlet.
Ace Glass, Inc. Beaker 400mL jacketed Ace-Safe hose connections for 1/4in tubing 112mm inside height 75mm inside diameter w/pour spout
Beaker 400mL jacketed Ace-Safe hose connections for 1/4in tubing 112mm inside height 75mm inside diameter w/pour spout
Ace Glass, Inc. Beaker 4L jacketed Ace-Safe hose connections for 1/2in tubing 232mm inside height,150mm inside diameter w/pour spout
Beaker 4L jacketed Ace-Safe hose connections for 1/2in tubing 232mm inside height,150mm inside diameter w/pour spout
Ace Glass, Inc. Flask, reaction, 4L, jacketed, 168mm O-ring groove flat flange, 140mm bottom OD x 335mm H, 28/15 O-ring ball joints on jacket inlet/outlet
4L jacketed reaction flask with round bottom and 28/15 o-ring ball joints on jacket inlet/outlet. 168mm o-ring groove flat flange is used to seal a head, instead of a flat gasket. Jacketed for temperature control of ingredients. Supplied with CAPFE o-rings. Dimensions: 140mm bottom O.D. x 335mm H.
Ace Glass, Inc. Beaker 3L jacketed Ace-Safe hose connections for 1/2in tubing 225mm inside height 133mm inside diameter w/pour spout
Beaker 3L jacketed Ace-Safe hose connections for 1/2in tubing 225mm inside height 133mm inside diameter w/pour spout
Ace Glass, Inc. Beaker 100mL jacketed,Ace-Safe hose connection for 1/4in. Tubing 61mm inside height 48mm inside diameter w/pour spout
Beaker 100mL jacketed,Ace-Safe hose connection for 1/4in. Tubing 61mm inside height 48mm inside diameter w/pour spout
Ace Glass, Inc. 500mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve, #11 Ace-Thred inlets/outlets for use with 3/8in .
500mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve, #11 Ace-Thred inlets/outlets for use with 3/8in .
Ace Glass, Inc. 150L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. 3000mL pressure vessel body, jacketed, 150mm flange, round bottom, 28/15 ball joint inlet/outlet
3000mL pressure vessel body, jacketed, 150mm flange, round bottom, 28/15 ball joint inlet/outlet
