Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. Funnel, 1000mL, jacketed, pressure equalizing, addition, 24/40 joints, 4mm PTFE stopcock
1000mL jacketed pressure equalizing addition funnel with 24/40 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Chemglass Life Sciences Beaker, Quartz, 100mL, 62mm OAH X 51mm OD
Beaker, Quartz, 100mL, 62mm OAH X 51mm OD. Low form beaker made of quartz. Non-graduated with pouring spout. Beaker can be used at temperatures to 1000°C.
Electron Microscopy Sciences Glass Microbeaker, 1ml, 12 mm diameter, 13 mm height
For the processing of micro-samples and for visual or microscopic examination, staining, fixation, infiltration, liquid evaporation, bacterial growth, weighing, etc.
Volume: 1ml
Diameter: 12 mm
Height: 13 mm
Ace Glass, Inc. Flask, reaction, jacketed, 5L, 4in grooved flange, 28/15 O-ring ball joints on jacket inlet/outlets
5L jacketed reaction flask with a 4 grooved flange, and 28/15 o-ring ball joints on the jacket inlet/outlets. Flask should be used with a stainless steel quick release clamp. Supplied with one CAPFE o-ring (PTFE encapsulated silicone).
Bellco Glass, Inc. 100mL Graduated Beaker, Polypropylene, Non-sterile
The Polypropylene graduated beaker has molded pouring spouts and rolled up lip for drip-less work environment. They have angle walls for easier handling and sample retrieving. Nesting design for easy stacking and storage.\n\nSpecifications:\n
- \n
- Smaller case quantities are easier to store and are ideal for small scale users. \n
- Polypropylene material fir resistance to a variety of strong acids and solvents. \n
- Size:100mL \n
- Pack Description: 100/Bag \n
- Case Quantity: 100 \n
Ace Glass, Inc. 2000mL pressure vessel body, one-piece, jacketed, #25 center, (3) #15, (1) #7 side necks, round bottom, #11 Ace-Thred connections on jacket inlet/outlet, use 3/8in tubing.
2000mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.
Ace Glass, Inc. 500mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
500mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. Beaker, PTFE, thermotech bottom, 400mL
400mL molded, pure inert PTFE beaker with pour spout. Bottom surface has molded, stabilized PTFE-carbon outer surface for better heat transfer, and to handle higher temperatures up to 270C.
Ace Glass, Inc. 500mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 60mm head with #15 center, (2)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
500mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 60mm head with #15 center, (2)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
Ace Glass, Inc. Flask, reaction, jacketed, 5L, 6in grooved flange, 28/15 O-ring ball joints on jacket inlet/outlets
5L jacketed reaction flask with a 6 grooved flange, and 28/15 o-ring ball joints on the jacket inlet/outlets. Flask should be used with a stainless steel quick release clamp. Supplied with one CAPFE o-ring (PTFE encapsulated silicone).
Ace Glass, Inc. 1000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
1000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
Ace Glass, Inc. Beaker, 100mL, jacketed, Ace-Safe hose connections for 1/4intubing, 61mm inside height, 48mm inside diameter
100mL jacketed beaker with one upper and one lower Ace-Safe hose connection on opposite sides, for 1/4 in. tubing. Dimensions: 61mm I.H. x 48mm I.D. Does not have a pouring spout.
Ace Glass, Inc. Beaker, 400mL, jacketed, glass hose connections for 3/8intubing, 112mm inside height, 75mm inside diameter
400mL jacketed beaker with one upper and one lower glass hose connection on opposite sides, for 3/8 in. tubing. Dimensions: 112mm I.H. x 75mm I.D. Beaker does not have a pouring spout.
Ace Glass, Inc. 500mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, #11 Ace-Thred inlet/outlet, complete with addition funnel, condenser, pressure manifold and stirring assembly
500mL one-piece jacketed pressure reactor with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade. Supplied with addition funnel, condenser, pressure manifold, and stirring assembly.
Ace Glass, Inc. 500mL pressure vessel body, one-piece, jacketed, #25 center neck, (3) #15 and (1) #7 side necks, 0-8mm 28/15 ball joint bottom outlet, #11 Ace-Thred connection on jacket inlet/outlet for use with 3/8in ID tubing.
500mL pressure vessel body, one-piece, jacketed, #25 center neck, (3) #15 and (1) #7 side necks, 0-8mm 28/15 ball joint bottom outlet, #11 Ace-Thred connection on jacket inlet/outlet for use with 3/8in ID tubing.