Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Azzota Corp Blue Mushroom Cap, Pp Non-Woven, Double Elastic, 100/Pk
Blue Mushroom Cap, Pp Non-Woven, Double Elastic, 100/Pk
Trajan Scientific HPLC PROTECOL C8 Medical 3/PK
C8Q 10 mm length x 530 m ID (IT450 OT30) ProteCol HPLC guard column PK3
Grainger G2373 Webbing Polypropylene 1 1/2 W Orange
The Grainger 14A829 is a 14 gauge, type 1 electrical extension cord that is 25 feet long. It has a yellow jacket and is designed for indoor and outdoor use. The 3-wire grounded cord has a molded plug on one end and receptacle on the other end. It can handle up to 15 amps and 125 volts. The flexible vinyl jacket resists oil, water and abrasion. This general purpose extension cord is UL listed and CSA certified.
Chemglass Life Sciences Closure Only, GPI 13-425, Red, Open Hole, Polypropylene
Closure Only, GPI 13-425, Red, Open Hole, Polypropylene. Used with Viton O-Rings and threaded outer joints for making grease-free, vacuum tight seals on 14/10 MINUM-WARE glassware components. The 8-425 size is used on the sidearm of Hickman still head and MW-81 GC collection vial, while the 13-425 is used on the MW-56 two neck flask sidearm.
Electron Microscopy Sciences EMS Polymethylpentene Beaker, 500 ml, 10 ml Subdivisions, 119 mm height, 87 mm diameter
Plastic EMS Beakers for general laboratory use. Graduations molded in milliliters. These beakers feature a no-drip pouring spout. They are shatter resistant reducing breakage and incidence of injury. Withstand temperatures as high as 180°C for short intervals.
Capacity: 500 ml
Subdivisions: 10 ml
Height: 119 mm
Diameter: 87 mm
Wall thickness: 1.8 mm
US Plastic Corporation 250 ML PP BEAKERS 50PK250 ML
Disposable, low cost, unbreakable and very corrosive resistant. For use up to 250 deg. F. Autoclavable. Dripless lip and flat base. Graduated in ml and oz. Sold in package lots only. Translucent.
Alkali Scientific Griffin Low Form Beakers, Type 3.3 Borosilicate Glass, Printed Graduations 150 mL - 12/Pk
Griffin Low Form Beakers are designed using Type 3.3 borosilicate glass, providing excellent durability, chemical resistance, and thermal stability for laboratory applications. The low form structure offers a wide base that improves balance and reduces the likelihood of tipping during handling, mixing, or heating. Printed graduations on the beaker enable quick and approximate volume measurements, assisting with efficient liquid handling tasks. The borosilicate glass construction allows safe use under rapid temperature changes, making the beaker suitable for heating on hot plates and other controlled heat sources. These beakers are commonly used in laboratories for mixing solutions, heating liquids, and general-purpose sample preparation.
Alkali Scientific Griffin Low Form Beakers, Type 3.3 Borosilicate Glass, Printed Graduations 50 mL - 12/Pk
Griffin Low Form Beakers are made from durable Type 3.3 borosilicate glass, ensuring excellent resistance to heat and chemical exposure in laboratory environments. The low profile design enhances stability and minimizes the risk of tipping during mixing, heating, and pouring processes. Each beaker includes clearly printed graduations that provide convenient reference points for approximate volume measurements. The borosilicate glass construction allows the beaker to withstand rapid temperature changes, making it suitable for use on hot plates and in various heating applications. These beakers are widely used for solution preparation, liquid handling, and routine laboratory tasks requiring reliable and heat-resistant glassware.
Med Vet International Round-Hole Plate, Heavy-Duty, J0408E, 3.5mm, 12 holes, 156mm, Each
12mm W, 4mm thick heavy-duty plate is stronger than either the 3.5mm compression plate or our 3.5mm standard round-hole plate. Use of this plate makes 3.5mm cortical or 9/64" screws appropriate for the larger canine breeds.