Reservoirs and Liners
Alkali Scientific CellPro™ Reservoir Microplates without Caps, Multi Well, 32mL, 8 Channel, Medium Profile 44.5mm Height, 50/Cs, Sterile
The 22mL reservoir microplates are made of polypropylene (PP), a transparent polymer material with good chemical compatibility for the storage of most polar organic solutions, acidic and alkaline solutions, and other laboratory liquids. Our reservoirs have the standard SBS size, which Is suitable for all kinds of automatic liquid handling systems. The built-in groove at the bottom of the reservoirs can reduce the dead volume of reagent and ensure the consistency of the liquid volume being handled. • Matched reservoir breaker (for 96 and 384) and the cover can avoid the liquid wastage in the process of operation.• Can be stored at -80℃• Low heavy metal content• Used high quality, imported PP material for high stability, ensuring no chemical reactions with test reagents.• Compatible with DMSO and inert to water• Certified DNase/RNase and Pyrogen Free• Conformed to ANSI/SBS Standards
Thomas Scientific Single cavity polypropylene reservoir, 300ml, 96 pyramids base geometry, 44mm height, irradiated, 25/Case
Single cavity polypropylene reservoir, 300ml, 96 pyramids base geometry, 44mm height, irradiated
Chemglass Life Sciences 5L Solvent Reservoir, Bottle Only
Replacement 5L solvent reservoir bottle. BOTTLE ONLY.
Chemglass Life Sciences Solvent Reservoir System, 2L, Complete
Complete 2L Solvent Reservoir Consists of:1 Plastic Coated Glass Reservoir1 3-Hole Cap Assembly1 Combination Inlet/Sparger Filter, 2um2 CG1164N02 Flangeless Nuts for 1/8” Tubing2 CG1164F02 Flangeless Ferrule for 1/8” Tubing1 CG116610 Tefzel Plug1 CG116402 1/8” PTFE Tubing x 10’ long The bottle is blue tinted plastic coated flat bottom, which provides additional safety by containing the glass fragments from accidents.A CG116745 cap assembly, manufactured of Polybutyleneteraphthalate (PBT) & PTFE will allow the cap to withstand higher temperatures 200C° & is resistant to alcohols, ethers, hydrocarbons, & strong acids. The CG116608 cap assembly fits GL45 threaded bottles & has a PTFE bulkhead w/ three 1/4"- 28 threaded ports to accommodate fittings for PTFE 1/8" O.D. tubing.The bottom of the bottle inlet filter has a 2um filter which provides sparging capabilities preventing bubbles from entering the system.NOTE: The 2µm filter has a maximum flow rate of 30mL per minute.
Sigma Aldrich Fine Chemicals Biosciences PyrexR heavy wall graduate
These flasks have sidearm tabulations and are blown in special molds designed to give maximum mechanical strength. for convenience the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers.
Research Products International Corp 12 CHANNEL REAGENT RESERVOIR
502723521 12 CHANNEL REAGENT RESERVOIR
Molecular Devices CellXpress.ai storage bottle and cap for H2O2 source. Contains one 100ml glass bottle, cap with quick connection, and vent filter
CellXpress.ai storage bottle and cap for H2O2 source. Contains one 100ml glass bottle, cap with quick connection, and vent filter.
Quality Biological Inc 50mL Reagent Reservoir - Polystyrene, V-Shaped, Individual Pack, White, Sterile, 1/PK, 80/CS
50mL Reagent Reservoir - Polystyrene, V-Shaped, Individual Pack, White, Sterile, 1/PK, 80/CS
Chemglass Life Sciences 1000mL Reservoir, Chromatography, 50/30 Lower Ball
1000mL Reservoir, Chromatography, 50/30 Lower Ball. Reservoir for use with CG-1199 and CG-1200 columns. Reservoir has a top 35/20 socket joint for use with CG-1201 flow control adapter and the listed size lower ball joint.
Sigma Aldrich Fine Chemicals Biosciences Reagent Reservoir reservoi
Reagent Reservoirs offer a fresh and modern design with enhanced features to streamline pipetting procedures. Graduation markingson the top edge and inner walls allows measurements of liquid to be easily identified and reduces waste of expensive reagents. Pour-off spouts design on all four corners enables easy spill-free pouring and reduces chance of dripping.