Cell Culture Flasks
NEST SCIENTIFIC USA 96 Well Cell Culture Plate, White, Flat bottom, TC, Sterile, 100/cs
Nest Scientific cell culture plates are molded from crystal clear USP grade VI virgin polystyrene. This part number comes indovidually wrapped in Tyvek/plastic blister packages. Plates are plasma etched (TC treated) to support adherent cell lines. Molded in an ISO 7 cleanroom, sterile (SAL 1 X 10^-6) and lot tested free of DNase, RNAase, DNA, cytoxins/endotoxins and BSE/TSE. cGMP compliant (21 CFR part 820/821). Extensive validation dossier available upon request.
Thomson Instrument Company Optimum Growth 5L Flask w/ Port, Sterile
Thomson’s Optimum Growth Sampling Flasks feature integrated one-way valves that enable aseptic sampling directly in the shaker or on the benchtop, helping reduce contamination risk and improve efficiency—especially in high-throughput environments.•Available in 125 mL, 250 mL, 500 mL, and 5 L sizes with integrated one-way sampling valves•Aseptic sampling without removing the cap—simply connect a syringe and collect samples•Enables sampling without removing flasks from shakers or moving them to biosafety cabinets•Streamlines workflows and minimizes time, contamination risk, and handling complexity•0.2 µm PTFE vented caps support sterile gas exchange and maintain culture integrity
Chemglass Life Sciences 3L Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215
Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215. Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Gray polypropylene vented cap has a 0.22µm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.
CELLTREAT Scientific Products 225cm2 Tissue Culture Flask - Vent Cap, Sterile
CELLTREAT Scientific Products 225cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Vent cap and maximum volume of 700mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 5/re-sealable bag, 25/case.
Chemglass Life Sciences 2-Port Assembly, 3000mL Spinner Flask
Port assemblies are constructed of 316L electro-polished stainless steel.These port assemblies fit all types of spinner flasks.The assemblies consist of a siphon and vent tube.Supplied complete with a GL-45 open top cap and silicone gasket.
Chemglass Life Sciences Spinner Flask, 500mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Chemglass Life Sciences Spinner Flask, 1000mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences BioProcess Spinner Flask, 250mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences BioProcess Spinner Flask, 100mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 70 x 145
Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 70 x 145. Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
Ace Glass, Inc. Flask, shake, 2L, 3 extra deep baffle, beaded neck, cs/3
Flask, shake, 2L, 3 extra deep baffle, beaded neck, cs/3
Bellco Glass, Inc. Manufactured from type 1 class a Borosilicate glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and
Manufactured from type 1 class a Borosilicate glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and
Bellco Glass, Inc. Manufactured from type 1 class a Borosilicate glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and
Manufactured from type 1 class a Borosilicate glass. Shake flasks are ideal for preliminary fermentation and bacterial growth studies. They are the basic tool for growth studies of aerobic microbial cultures. They have rigidly controlled baffle angles and
Ace Glass, Inc. Flask, nephelo, 300mL, baffled, 14mm OD x 130mm sidearm, 25mm longneck, 210mL capacity below sidearm, cs/4
Flask, nephelo, 300mL, baffled, 14mm OD x 130mm sidearm, 25mm longneck, 210mL capacity below sidearm, cs/4