Cell Culture Flasks
Sarstedt Inc T175 Tissue Culture Flask, Red Ventilated Cap, 40/Case
T175 Tissue Culture Flask Canted Neck Red Ventilated Cap for Adherent Cells
TWD Scientific LLC BioX 75cm2 Tissue Culture Flask. Case of 100
TWD Scientific LLC BioX 75cm2 Tissue Culture Flask. Case of 100
Ace Glass, Inc. Flask, shake, 500mL, (3) side & (3) bottom deep baffles, 38mmlong neck, cs/12
500mL cell culture shake flask with three bottom edge baffles and three bottom baffles to greatly enhance mixing of cells in suspension and gas transfer to media. Ideal for use with reciprocating baths and shakers. Long style, straight neck accomodates either plastic or stainless steel closures.
Ace Glass, Inc. Flask, trypsinizing, 150mL, baffled, #2 stopper size beaded neck, cs/3
150mLrypsinizing flask with beaded neck and long side baffles. Ideal for converting homogenous tissue samples into cell suspensions by digestion of connective tissue. Heavy beaded neck accepts either cotton plugs or stoppers. The extra-deep baffles enhance vigorous agitation.
Ace Glass, Inc. Flask, shake, 500mL, 3 extra deep baffle, beaded neck, cs/12
Flask, shake, 500mL, 3 extra deep baffle, beaded neck, cs/12
Ace Glass, Inc. Flask, trypsinizing, 300mL, baffled, with sidearm & neck screwcaps, cs/3
300mL trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep, extra long side baffles greatly enhance vigorous agitation.
Ace Glass, Inc. Flask, shake, 500mL, three side baffles, 38mm OD long neck, cs/12
500mL shake flask with triple side baffles for cell culture applications. Flask has a 38mm O.D. long style straight neck to accomm ODate plastic and stainless steel closures. The flask is triple baffled on the bottom edge to increase mixing and oxygen transfer to the media.
Atlas Biologicals Cell Culture Flask -175cm2, Vent Cap, TC, sterile, 5ea/pk, 30ea/cs
Cell Culture Flask -175cm2, Vent Cap, TC, sterile, 5ea/pk, 30ea/cs
CELLTREAT Scientific Products 225cm2 Tissue Culture Flask - Vent Cap, Sterile
CELLTREAT Scientific Products 225cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Vent cap and maximum volume of 700mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 5/re-sealable bag, 25/case.
Chemglass Life Sciences 12mm GL-45 Probe Holder, Compression Style
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Alkali Scientific Erlenmeyer Shake Flask, Polycarbonate, baffled bottom w/ vented screw cap, Sterile, indiv wrapped, 500mL, 12/Case
• Vented screw caps • Flat or baffled bottoms • Gamma sterile (SAL 10-6) • Pyrogen free and RNase/DNase free • Individually wrapped Erlenmeyer Shaker Flasks are made of polycarbonate, PETG or styrene/butadiene (Jumbo Flasks only). The polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth. The mouth size conforms with the international SBS standard, for quick, secure connection to bioreactor equipment.Polycarbonate flasks and Jumbo Fernbach flasks have baffled (ribbed) bottoms to provide increased oxygenation and mixing efficiency even at lower shaking speeds. All flasks, regardless of size, are individually wrapped and gamma sterilized to SAL 10-6, and they are free of RNase, DNase, pyrogen, endotoxins and human DNA. Polycarbonate Flasks are autoclavable at 121°C and 15PSI for 30 minutes.
Alkali Scientific Erlenmeyer Shake Flask, PC Conical, Flat Bottom, Sterile, 250mL, 12/Case, Vented Cap
• PC Bottle• Vent caps with 0.2 μm hydrophobic filters for gas exchange without contamination• Individually packaged in sterile bags|• Sterilized by E-beam, SAL=10^-6• Non-Pyrogenic, DNase/Rnase free
Alkali Scientific Erlenmeyer Shake Flask, PC Conical, Flat Bottom, Sterile, 3L, 4/Case, Vented Cap
• PC Bottle• Vent caps with 0.2 μm hydrophobic filters for gas exchange without contamination• Individually packaged in sterile bags|• Sterilized by E-beam, SAL=10^-6• Non-Pyrogenic, DNase/Rnase free
Chemglass Life Sciences Flask, Erlenmeyer, 2000mL, Sterile, Baffled, Polycarbonate, 53-B, with Blue Duo Cap, BULK PACK
Flask, Erlenmeyer, 2000mL, Sterile, Baffled, Polycarbonate, 53-B, with Blue Duo Cap, BULK PACK. Quadruple baffled Erlenmeyer flasks are sterile, non-pyrogenic and manufactured with polycarbonate resin. Flasks are supplied with exclusive DuoCap designed for both aerobic and anaerobic applications (for aerobic applications the cap utilizes a 0.22m pore size PTFE membrane for sterile air exchange; for anaerobic applications the cap can easily be converted to a solid cap design). Solid top caps are also ideal for applications requiring mixing, shaking and storage of biological fluids. Graduations are molded for accuracy.EZ-Tear packaging allows for easy access.