Pump Plunger Assemblies
AVANTOR MASTERFLEX (VWR LLC) Masterflex Stainless steel mounting hardware for two I/P Easy-Load pump heads.
Stainless steel mounting hardware for two I/P Easy-Load pump heads.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Easy-Load Pump Head Mounting Hardware, Mounts Four Pump Head, Stainless Steel; 2/Set
This mounting hardware is designed to make the Masterflex L/S series pump head flexible for a wide range of applications. Choose from different material or increase the number of pump heads on a L/S drive with mounting hardware. This hardware is compatible with the Masterflex L/S series peristaltic drives.
Electron Microscopy Sciences Edwards EMF3 Oil Mist Filter
Oil mist filters help with exhaust mist from the vacuum pump which sticks to any surface that it touches and becomes a dust magnet. Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen with gas ballast or when pumping at high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pumpor pump oil.
Protection from oil mist emissions as required by COSHH and health and safety regulations. Use of optional oil return kits results in reduced oil level maintenance and savings in pump oil and if the oil element becomes blocked. An integral pressure relief valve opens. For the E2M1.5.
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump BT100-1L with DG-4-A, 4 channels, Flow Rate: 0.002-500ml/min, Up to 24 Channels, CE Certified, Suitable for Laboratory and Industrial Use
Pumps/ peristaltic pumps/ Longer Pump BT100-1L&DG-4-ASpecifications- Speed: 0.1rpm-100rpm, CW/CCW- Speed resolution: 0.1rpm- Control mode: Control panel, external signal control and communication control are available- Display: 128 × 32 graphic LCD for current running status- Calibration function: Improve flow rate accuracy- External control: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, external control module optional)- Communication interface: RS485- Power-off memory: Return to previous status when powered on- Prime: For fast filling and emptying at full speed- Dimension (L × W × H): 202 × 160 × 239 (mm)- Power supply: AC 110V ±10% / 50W or AC 220V ±10% / 50W optional- Operating temperature: 0 to 40°C- Relative humidity: <80%- IP rating: IP31- Weight: 5.3kg
Ace Glass, Inc. DN40 Ball joint to 45/50 inner joint adapter
DN40 Ball joint to 45/50 inner joint adapter
Thomas Scientific MiniVac 1L Polystyrene Bottle; includes Transfer Cap
Simple, safe, cost effective laboratory waste removal system The Argos MiniVac waste collection system was designed with safety, convenience and bench-top space in mind. The MiniVac system replaces the need for glass waste containers; eliminating the risk of breakage and contamination. The MiniVac flask and cap sit in a safety reservoir basin thatcollects liquid should flask overflow, crack or leak. Full flasks can be transferred safely by using supplied transfer cap. Small footprint (7.5 in.); easy clean up with 70% isopropyl alcohol. The system includes a disposable 1L polystyrene flask, plastic reservoir basin, polypropylene cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with in-house vacuum
Ace Glass, Inc. DN40 Socket joint to 29/42 inner joint adapter
DN40 Socket joint to 29/42 inner joint adapter
Electron Microscopy Sciences EMF 10 Replacement Odor Element
Replacement part for the EMF10 oil mist filter. The EMF10 is used with the Edwards RV3, RV5, and RV8 vacuum pumps.
BURKLE INC PP barrel pump with discharge hose/stopcock, 25.59 in. (65 cm)
Barrel pumps made of polypropylene allow a fast transfer of liquids from barrels, canisters and tanks.
The low-mounted non-return valve of the barrel pump and the immersion depth that can be steplessly adjusted using the barrel screw joints ensure good removal of residual liquid. The barrel screw joint fastens the barrel's pump securely to the barrel. Barrel screw joints and thread adapters for commercially available containers are available as optional accessories.
BURKLE INC Thread adapter S 56x4 (Tri-Sure) outer- G2"inner, orange
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Gardner Denver Welch Vacuum Tech Inc HOSE ADAPTER NW16
This item has a minimum qty of 3 per supplier requirements.