Vacuum Tubing
Accuflow Systems SILICONE TUB. 2-STOP 2.79 6/PK
Manufactured by Cole Parmer and sold by Accuflow. Microbore two-stop tube sets, silicone (platinum-cured); 2.79 mm ID. Pk of 6. Specifications: Product Type - Stopped Pump Tubing Tubing formulation - Silicone (platinum-cured) Pump Series - L/S Masterflex
Accuflow Systems TBNG MFLEX FOOD A60F#16 500FT
Manufactured by Cole Parmer and sold by Accuflow. Spooled Masterflex Norprene Food tubing, L/S 16, 500 ft. Similar to Norprene, with FDA compliant materials Excellent for food and dairy applications Good flow consistency Heat and ozone resistant Heat
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 3/32 in ID, 50 ft
Tygon S3 E-3603 tubing is a clear, flexible, non-DEHP tubing designed for laboratory, food and beverage, and vacuum transfer applications. It resists flex-fatigue and abrasion, and is supplied as a 50 ft (15 m) continuous length. The tubing is rated for 25 psi working pressure and 29.9 inHg vacuum, and supports autoclave, gamma radiation, and ethylene oxide sterilization methods. It meets FDA food-contact and NSF 51 standards and passes relevant USP/ISO biocompatibility tests.
- Clear flexible tubing for laboratory and food-contact use
- 3/32 in (2.4 mm) I.D., 5/32 in (4.0 mm) O.D., 1/32 in (0.8 mm) wall
- Supplied in 50 ft (15 m) continuous length
- Maximum working pressure 25 psi at 73°F (1.7 bar at 23°C)
- Autoclavable, radiation tolerant, and ethylene oxide sterilizable
- Meets FDA food-contact and NSF 51 standards
- Minimum bend radius 3/8 in (9.5 mm); max recommended temperature 165°F (74°C)
Accuflow Systems Tygon E-3603 Tubing, Thermoplastic, 5/16 in ID, 50 ft
Tygon E-3603 is a crystal-clear, biocompatible thermoplastic tubing engineered for medical and diagnostic fluid transfer where chemical compatibility, visual inspection, and low extractables are required. The tubing offers a smooth inner bore to reduce buildup, high dimensional tolerance for consistent fittings, and resistance to flex-fatigue for reliable operation in laboratory instrumentation and IVD analyzers.
- Crystal-clear thermoplastic formulation, phthalate-free and BPA-free.
- Inner diameter 5/16 in (7.9 mm).
- Outer diameter 7/16 in (11.1 mm).
- Wall thickness 1/16 in (1.6 mm).
- Length 50 ft (15 m).
- Smooth inner bore reduces buildup and carryover.
- High dimensional tolerance for reproducible fittings.
- Suitable for medical diagnostics, IVD analyzers, and laboratory fluid handling.
Accuflow Systems Saint-Gobain PVC Tubing, 1/8 in x 1/4 in, 100 ft
Clear, flexible PVC tubing intended for laboratory and industrial fluid transfer. Provides visual clarity for flow inspection, good flex life for routing and peristaltic pump use, and broad chemical resistance; uses a non-DEHP plasticizer and contains no BPA or phthalates.
- Material: PVC.
- Color/clarity: Clear.
- Inner diameter: 1/8 in.
- Outer diameter: 1/4 in.
- Wall thickness: 1/16 in.
- Length: 100 ft per package.
- Temperature range: -45 °F to 165 °F (-43 °C to 74 °C).
- Mechanical properties: Shore A 67, tensile strength 2,450 psi, ultimate elongation 400%.
- Plasticizer: non-DEHP; contains no BPA or phthalates.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 5/16 in ID, 9/16 in OD
Tygon S3 B-44-4X flexible tubing is a phthalate-free, food-grade tubing designed for dairy transfer, filling, and dispensing applications. It offers a smooth inner bore, flexibility for routing, and compliance with common food-contact regulations, making it suitable for dairy and beverage processing systems.
- Phthalate-free and contains no BPA.
- Inner diameter: 5/16 in (7.94 mm).
- Outer diameter: 9/16 in (14.29 mm).
- Wall thickness: 0.125 in (3.175 mm).
- Material: bio-based flexible tubing suitable for food contact.
- Designed for dairy transfer, aseptic filling, and condiment dispensing.
- Regulatory compliance: conforms to FDA, NSF, 3-A, Japan Food Sanitation Law #370/1959, REACH, and applicable EU food-contact regulations.
Accuflow Systems Saint-Gobain Tygon 2375 Tubing, 5/16 in ID, 7/16 in OD
Tygon 2375 tubing is a plasticizer-free, ultra chemical-resistant flexible tubing designed for demanding chemical transfer and fluid-handling applications. The 5/16 in ID, 7/16 in OD construction with a 1/16 in wall balances flexibility and flow while minimizing sorption and particulate buildup.
- Plasticizer-free, non-DEHP formulation for chemical resistance.
- Inner diameter 5/16 in, outer diameter 7/16 in, wall thickness 1/16 in.
- Clear tubing with smooth inner surface to reduce particulate buildup.
- Working pressure 20 psi at 73°F.
- Minimum bend radius 1.25 in.
- Maximum recommended operating temperature 130 °F (54 °C); flexible to -103 °F (-75 °C).
- Excellent resistance to acids, bases, salts, and alcohols; fair resistance to ketones.
- Low sorption to minimize cross-contamination.
- Vacuum rating 29.9 inHg.
- Durometer Shore A 75; tensile strength 1,900 psi; ultimate elongation 850%.
Accuflow Systems Saint-Gobain Versilon Tubing, SE-200, FEP Liner, 3/16 in ID
Versilon SE-200 tubing is an FEP-lined, thermoplastic elastomer flexible tubing designed for chemical transfer and fluid handling. The FEP inner liner provides inertness and broad chemical compatibility while the elastomer outer delivers flexibility and an outstanding bend radius. This configuration is 3/16 in (4.76 mm) ID x 5/16 in (7.94 mm) OD, 0.063 in (1.59 mm) wall, and 50 ft length.
- FEP inner liner provides broad chemical compatibility and inertness.
- Thermoplastic elastomer outer for flexibility and resistance to kinking.
- 3/16 in ID, 5/16 in OD, 0.063 in wall, 50 ft length.
- Crystal clear for visual monitoring of fluids.
- Phthalate-free and free of BPA.
- Suitable for chemical processing, solvent and adhesive transfer, and semiconductor applications.
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, Vacuum, Phthalate-Free
Tygon E-3603 is a flexible, crystal-clear thermoplastic tubing engineered for laboratory and medical vacuum and fluid transfer applications. It offers broad chemical compatibility, a glassy-smooth inner bore to minimize buildup and carryover, and vacuum performance suitable for many analytical and diagnostic systems. Available sizes and vacuum ratings vary by specific dimension; consult the manufacturer's specifications for exact values.
- Crystal-clear for visual inspection and bubble detection.
- Suitable for vacuum applications up to 29.9 inHg (760 mmHg) for many sizes.
- Thermoplastic material, non-oxidizing and non-contaminating.
- Glassy-smooth inner bore reduces buildup and carryover.
- Available in a wide range of inner and outer diameters; refer to specifications for exact dimensions.
- Phthalate- and BPA-free formulation.
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 1/4 in ID, 50 ft
Flexible, extra-heavy-wall thermoplastic tubing designed for laboratory and diagnostic fluid transfer and vacuum applications. The tubing provides vacuum integrity, clear visual inspection, and a non-contaminating, phthalate-free formulation suitable for sensitive applications.
- Extra-heavy-wall thermoplastic tubing for vacuum integrity and flex resistance.
- Clear, non-oxidizing, non-contaminating formulation for visual inspection.
- 1/4 in inner diameter, 1/2 in outer diameter, 1/8 in wall thickness, 50 ft length.
- Withstands full vacuum at room temperature (29.9 inHg / 760 mmHg).
- Maximum recommended operating temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Phthalate-free and BPA-free formulation to minimize contamination risk.
- Suitable for laboratory, medical, diagnostic, and general fluid-handling applications.
Accuflow Systems Saint-Gobain Tygon Tubing, 1/16 in I.D./1/8 in O.D., 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible thermoplastic tubing formulated for medical and diagnostic fluid handling where visual inspection, chemical compatibility, and long service life are required. The tubing's high dimensional tolerance and resistance to flex-fatigue help provide consistent, reproducible fluid transfer and minimize downtime in analytical and instrumentation applications.
- Flexible, crystal-clear thermoplastic for visual inspection and fluid transfer.
- 1/16 in inner diameter, 1/8 in outer diameter, 1/32 in wall, 50 ft length.
- Glassy-smooth inner bore resists buildup and reduces carryover.
- Non-oxidizing, non-contaminating formulation minimizes extractables.
- High resistance to flex-fatigue and abrasion for extended service life.
- Suitable for laboratory, medical diagnostic, and instrumentation applications.
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, 1/4 in ID, 7/16 in OD
Saint-Gobain Tygon S3 E-3603 tubing is a flexible, high-clarity thermoplastic tubing formulated for laboratory, medical, and diagnostic fluid handling where chemical compatibility and visual inspection are required. The E-3603 formulation is phthalate-free (non-DEHP), non-oxidizing, and features a glassy-smooth inner bore to minimize buildup and carryover. The tubing is resistant to flex-fatigue and supports vacuum service in standard sizes, making it suitable for peristaltic pump and instrumentation applications.
- Clear, high-clarity thermoplastic for visual inspection.
- 1/4 in internal diameter, 7/16 in outer diameter, 3/32 in wall.
- 50 ft standard package length.
- Phthalate-free formulation to minimize extractables.
- Glassy-smooth inner bore reduces buildup and carryover.
- Resistant to flex-fatigue and compatible with vacuum service.
- Suitable for medical, diagnostic, and laboratory fluid transfer.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 3/32 in x 7/32 in, Non-DEHP
Tygon S3 E-3603 laboratory tubing is a clear, flexible thermoplastic elastomer tubing designed for reliable laboratory fluid handling. It provides a glassy smooth inner bore for easy cleaning, broad compatibility with organic chemicals, and resistance to flex-fatigue and abrasion for extended service life. The tubing is suitable for peristaltic pumps, instrumentation connections, vents, drains, and general laboratory transfer applications.
- Thermoplastic elastomer construction for chemical resistance and flexibility.
- Inner diameter 2.38 mm (3/32 in), outer diameter 5.56 mm (7/32 in), wall thickness 1.59 mm (1/16 in).
- Temperature range -46°C to 74°C (-51°F to 165°F).
- Full-vacuum compatible at room temperature; working pressure varies by size.
- Handles most organic laboratory chemicals.
- Phthalate-free, non-DEHP formulation; contains no BPA.
- Resistant to flex-fatigue and abrasion for extended service life.
