Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LAB 0.64MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-Lab, 0.64 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 26 200FT
Masterflex I/P Precision Pump Tubing, PharMed BPT, I/P 26; 200 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 1/2"" ID x 5/8"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Accuflow Systems 1 Inch Silicone Hose
1 Inch ID Platinum Cured Wire Reinforced Silicone Hose 48 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) TUBNG MFLEX TYGON E-LAB 88 50F
Masterflex I/P High-Performance Precision Pump Tubing, Tygon E-Lab, I/P 88; 50 ft, Avantor
Accuflow Systems Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer1/8 in.idx1/4 in.od x 500 ft spool
Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer1/8 in.idx1/4 in.od x 500 ft spool. Shore A 60 durometer,made with animal free compounds, ClassVI approved
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Ultramicrobore PTFE, 0.002"" ID x 0.014"" OD; 100 ft
Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is -400 to 500¿>F (-240 to 260¿>C); melts at 620¿>F (327¿>C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.