Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 0.38MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 0.38 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.14MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.14 mm ID; 12/PK, Avantor
Accuflow Systems TuFlux TPE 1/4"x7/16" (1/4 x 7/16 inch, 6,4 x 11,1 mm)
Manufactured by Sartorius, Tuflux TPE 1/4"x7/16", 1 coil = 100 m
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 0.51MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 0.51 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 0.76MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 0.76 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.37MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.37 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 2.06MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 2.06 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING C-FLEX 1.14MMID 50FT
Masterflex Ismatec Pump Tubing, C-Flex, 1.14 mm ID; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP CHMDRNCE BIO 0.76MM 6PK
Masterflex Ismatec Pump Tubing, 3-Stop, Chem-Durance Bio, 0.76 mm ID; 6/PK, Avantor
Accuflow Systems Saint-Gobain Sanitary Silicone Tubing, 3/8 in ID, 5/8 in OD
Sanitary platinum-cured silicone tubing designed for food, beverage, and sensitive fluid transfer applications. The ultra-smooth inner bore reduces particle entrapment, lowers extractables, and facilitates thorough cleaning and sanitization. Supplied in 50 ft coils and sized for precise transfer in laboratory and process settings.
- Material: platinum-cured silicone
- Inner diameter: 3/8 in (9.53 mm)
- Outer diameter: 5/8 in (15.88 mm)
- Wall thickness: 1/8 in (3.18 mm)
- Length: 50 ft per coil
- Certifications: USP Class VI, FDA, NSF 51, 3A sanitary standard
- Temperature range: -112 °F to 400 °F (-80 °C to 204 °C)
- Durometer: 50 Shore A
- Key feature: ultra-smooth inner bore to minimize particle entrapment and ease sanitization
Electron Microscopy Sciences Vacuum Pick-Up 5/16" Suction Cup
Accessory for use with the Vacuum Pick Up System.