Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) TUBNG PHARMEDBPT 2.29MMID 100F
Masterflex Ismatec Pump Tubing, PharMed BPT, 2.29 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON ELFL 0.76MMID 100FT
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 0.76 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 0.25MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 0.25 mm ID; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING TYGN LMT55 6.4 15M 50FT
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 6.4 mm ID x 9.5 mm OD; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX C-FLEX NO 70 10FT
Masterflex I/P High-Performance Precision Pump Tubing, C-Flex, I/P 70; 10 ft, Avantor
Sigma Aldrich Fine Chemicals Biosciences Tygon formula E-3603 laboratory tubing, 50ft
I.D. × O.D. × wall thickness: 3/16 in. × 9/16 in. × 3/16 in. TYGON E-3603 non-DEHP laboratory and vacuum tubing delivers the same superior performance you′ve come to expect from TYGON products - but now in a formulation that contains a widely accepted substitute for DEHP plasticizer. TYGON E-3603 laboratory tubing is specially formulated for resistance to flex fatigue and abrasion, handles virtually all inorganic chemicals found in the lab, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent build-up to facilitate cleaning.
Accuflow Systems Saint-Gobain FEP Tubing, 3/16in ID, 1/4in OD, 50 ft
PharmaFluor FEP tubing is an inert fluoropolymer tube formulated for biopharmaceutical, pharmaceutical, and laboratory fluid transfer. It resists absorption and adsorption of aqueous fluids, is fully characterized for biocompatibility, and supports a broad temperature range suitable for processing and sterilization.
- Material: FEP (fluorinated ethylene propylene).
- Inner diameter (ID): 3/16 in (4.76 mm).
- Outer diameter (OD): 1/4 in (6.35 mm).
- Wall thickness: 0.031 in (0.79 mm).
- Length: 50 ft (15.24 m).
- Temperature range: -100°F to 400°F (-73°C to 204°C).
- Biocompatibility: meets USP <88> Class VI and ISO 10993-5.
- Typical applications: sterile filling and dispensing, diagnostic equipment, cell and tissue transport, bioprocessing and analytical systems.
Accuflow Systems Altafluor 480 UHP PFA - available in coiled hose and schedule 40 pipe - 480 UHPPFA 3/8" X 1/2"- 500 FT
Altafluor 480 UHP PFA (Ultra High Purity Perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high purity requirements. This tubing is made exclusively from high molecular weight 100% virgin high performance resins to resist stress cracking and provides excellent chemical resistance (even to common fluorosurfactants). It has low permeation and a smooth surface finish. Unlike standard HP PFA tubing products, this tubing has superior flex life values comparable to those of PTFE. FDA approved for food contact and in compliance with FDA regulation 21 CFR 177.1550. Meets requirements of USP Class VI, and is chemically inert to nearly all industrial chemicals and solvents, has higher thermal stability than FEP and is translucent in appearance. It is certified to NSF 51, NSF 61 AND NSF 372 and meets or exceeds SEMI F57 AND C-90 requirements for semiconducters. Altafluor 480 UHP PFA is compatible with flare or conventional fittings.
Accuflow Systems Altafluor 200 FEP (Fluoronated Ethylene Propylene) - 200 FEP, 1/8" X 1/4"- 100 FT
Altafluor 200 FEP (Fluoronated Ethylene Propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. Altafluor 200 FEP offers excellent clarity which makes it ideal for sight glass/flow monitoring applications. Certified to NSF 51, NSF 61 and NSF 372. It has superior electrical insulation properties and is available in coiled hose and convoluted tubing constructions. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV transmission applications. Altafluor 200 tubing may be used with flare or conventional fittings.
Norell Inc THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 7.68mm OD X 7mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 7.68mm OD X 7mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
Norell Inc THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 5.60mm OD X 5mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 5.60mm OD X 5mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 5/8"" ID x 7/8"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/32" X 1/16"- 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.