Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 1/2"" ID x 5/8"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Accuflow Systems Versilon Tubing, FEP, 3/8 in ID, 9/16 in OD
Versilon SE-200 is an FEP-lined, clear flexible tubing designed for inert chemical transfer. It combines a smooth FEP inner liner with a flexible outer polymer to provide chemical resistance, visual clarity, and a tight bend radius for routing in process and laboratory systems.
- FEP inner liner for chemical inertness and low extractables.
- Clear construction for visual fluid inspection.
- 3/8 in inner diameter, 9/16 in outer diameter, 3/32 in wall thickness.
- Minimum bend radius 3.5 in for tight routing.
- Maximum operating temperature 165 °F (74 °C).
- Maximum working pressure 50 psi at 73 °F; 25 psi at 160 °F.
- Durometer hardness 66 Shore A; tensile strength 2,200 psi; ultimate elongation 390%.
- Common applications: chemical processing, semiconductor processing, photographic and adhesive transfer.
Accuflow Systems TUBING MFLEX PHARMED #13 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex PharMed BPT Tubing, L/S #13, 25' Applications: Cell and tissue culture work and pharmaceutical uses. Also good for light-sensitive samples. Characteristics: Nontoxic; nonhemolytic; extremely low
Grainger InsulMultitapCon PVC 6 AWG 250 kcmil
The Grainger 14V963 is a Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 1/2 in. Hammer Drill/Driver Kit with a 5.0 Ah Battery. It features a POWERSTATE brushless motor for efficiency, run time, and power. The REDLINK PLUS system protects against overload, over-discharge, and overheating. The kit includes the M18 FUEL hammer drill/driver, a REDLITHIUM XC5.0 battery, an M18/M12 charger, and a carrying bag. It has a 1/2 in. ratcheting chuck and a max torque of 1200 in-lbs. The drill measures 7-3/4 in. and weighs 5.1 lbs. with the battery.
Perkin Elmer US LLC PFA Sample Uptake Tubing
12 cm of this PFA Sample Uptake Tubing is included in every NexION 1000/2000 Consumables Kit and both the NexION 300/350Q/X/D Consumables Kit (N8140513) and the NexION 300/350S Consumables Kit (N8140514).
AVANTOR MASTERFLEX (VWR LLC) Masterflex Single-Use Sterile Sampling Bottle Assembly, PETG Bottle; 125 mL
Cap assembly includes a seamless liner with premolded C-Flex fill and vent tubes to create an unobstructed fluid path. The 18" fill tube is plugged at the terminal end to maintain assembly sterility until use. Vent tube includes a 0.2-micron PTFE vent filter to prevent infiltration by contaminants. Vent filter is hydrophobic to guard against loss of costly product or media during filling or emptying. The one-piece liner eliminates the risk of bacterial entrapment and contamination and forms an elastomeric seal between cap and bottle rim. C-Flex tubing is manufactured according to cGMP and meets USP Class VI and USDA requirements. Tubing can withstand temperatures from ¿100 to 275¿F (¿73 to 135¿C). C-Flex tubing has exceptional tensile and tear strength, extremely low extractables, and excellent biocompatibility. The smooth inner surface reduces absorption and protein binding.
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, Peroxide-Cured Silicone 2.79 mm ID; 6/PK
Designed for optimal operation in your Ismatec pumps. It is resistant to ozone and UV light. It won't crack, swell or harden. Translucent yellow color. Temperature range: -50 to 74C (-58 to 165F).
SANITARY COMPONENT SOLUTIONS HOSE PVC CLEAR 1/4 X 7/16
HOSE PVC CLEAR 1/4 X 7/16. This item has a minimum order quantity of 500 per supplier requirements.