Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain C-Flex Tubing, 3/8 in ID, 5/8 OD, 50 ft
C-Flex 374 thermoplastic elastomer (TPE) tubing, sized 3/8 in ID x 5/8 in OD in a 50 ft coil, is engineered for bioprocess and laboratory fluid transfer. The formulation is pharmaceutical-grade, sealable and weldable pre- or post-sterilization, and compatible with gamma, x-ray, and autoclave sterilization. It remains flexible across a wide temperature range and meets USP Class VI and relevant ISO standards.
- Pharmaceutical-grade thermoplastic elastomer for bioprocess compatibility.
- Sealable and weldable for aseptic welding connections and sealing disconnections.
- Sterilizable by gamma irradiation, x-ray irradiation, and autoclave.
- Flexible from -45°C to 135°C (-50°F to 275°F).
- Meets USP Class VI and relevant ISO standards.
- Available in 50 ft coils for continuous runs and assemblies.
Accuflow Systems TUBING VINYL 1/8 x 1/16 50FT/PK
Saint Gobain Clear PVC Tubing Diameter Inner 0.12 in. 3.2 mm Diameter Outer 1/4 in. 6.4 mm Thickness 1.6 mm 0.0625 in. Overall Length 50 ft. 15.2 m
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 8MM X 10MM - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Accuflow Systems TUBING MFLEX PHARMED #17 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex PharMed BPT Tubing, L/S #17, 25' Applications: Cell and tissue culture work and pharmaceutical uses. Also good for light-sensitive samples. Characteristics: Nontoxic; nonhemolytic; extremely lo
Accuflow Systems MFLEX SILICONE TUB. #17 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex platinum-cured silicone tubing, L/S 17, 25 ft. Ensure optimal performance from your Masterflex pump Slightly greater clarity than peroxide-cured tubing Smooth surfaces; lower pr
Accuflow Systems TUBING MFLEX SILICONE #16 25FT
Masterflex peroxide-cured silicone tubing, L/S 16, 25 ft. Ensure optimal performance from your Masterflex® pump Greater physical compression capability Economical, longer tubing life Masterflex® L/S® pump tubing is manufactured to extremely close tolerances that match our L/S® pump heads, ensuring accurate, repeatable flow and long tubing life. Our pump tubing is factory-tested and optically inspected to provide the best performance from your peristaltic pump.
AVANTOR MASTERFLEX (VWR LLC) TUBG TYG 2-STOP 0.25MM 12/PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL , 0.25 mm ID, 15IN L; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG MFLEX TYGON ELFL 18 25FT
Masterflex L/S Precision Pump Tubing, Tygon S3™ E-LFL, L/S 18; 25 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Precision Pump Tubing, BioPharm Platinum-Cured Silicone, I/P 73; 100 ft
Choose our BioPharm Silicone platinum-cured tubing for purity, very low extractables, and an ultra-smooth inner surface. Ideal for pharmaceutical and biotechnological applications, this tubing complies with USP class VI and 3A sanitary standards. The ultra-smooth inner surface minimizes particle entrapment and microscopic build-up during fluid transfer. Tubing can be sterilized by autoclave, gamma radiation, or ethylene oxide. Spools contain continuous pump tubing, allowing you to cut the exact length needed and eliminating waste.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PTFE, 1/2""ID x 9/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Certification: Resin is FDA-compliant (21 CFR 177.1550) Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: Autoclave, ethylene oxide, or dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 2/5"" ID x 1/2"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/8"" ID x 1/4"" OD; 300 ft
Reduce unpacking time, save money on shipping and ensure that you always have enough tubing on hand with bulk tubing. Platinum-cured silicone spools are sold in 300 ft or 500 ft spools.
Accuflow Systems Masterflex Spooled Pump Tubing, Platinum-Cured Silicone, L/S 24, 300 ft
Masterflex L/S 24 spooled platinum-cured silicone pump tubing provides continuous lengths for precise peristaltic and fluid transfer in pharmaceutical, biotech, food, and laboratory applications.
- Platinum-cured silicone material.
- L/S 24 size, hose barb 1/4 in (6.4 mm).
- 300 ft (91.4 m) spooled continuous length.
- Temperature range -50 to 230 °C (-58 to 446 °F).
- Compliant with FDA 21 CFR 177.2600, USP, European Pharmacopoeia, 3A, cGMP, RoHS, ADCF, and REACH (non-DEHP).
- Spooled packaging reduces scrap and eases storage and handling.
Grainger InsulMultitapCon PVC 4 AWG 500 kcmil
The Grainger Insulated Multitap Wire Connectors are designed for connecting multiple 4/0 AWG copper or aluminum wires. They feature a split bolt design with an insulated cover for safety. The connectors accommodate wire sizes from #14-4/0 AWG. They are UL listed for 600V building wire applications. The connectors are available in 2-port, 3-port, 4-port, and 5-port options. They provide a secure mechanical connection without soldering or taping. The insulated cover prevents accidental contact.