Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
MSC Guardair General Purpose Air Hose Assembly, 3/4 in ID, 25 ft, 200 psi
This tough, abrasion- and ozone-resistant, heavy-duty rubber air hose is designed to supply compressed air to safety air guns and vacuums. It includes Universal fittings on each end and is ideal for supplying compressed air to vacuums in various applications.
- Minimum pressure rating: 200 psi
- Pre-installed universal couplings
- Swivel male NPT fittings on both ends
- Fittings: 3/4 in MNPT swivel x 3/4 in MNPT swivel
Med Vet International Miltex Meniscus Probe, 7-1/2in, 1.3mm Probe Tip, 27-99
Miltex Meniscus Probe, 7-1/2in, 1.3mm Probe Tip, 27-99
Accuflow Systems Sani-Tech STHT-R tubing, 50-foot, ID 0.125"" x OD 0.355"" x Wall 0.115"" is manufactured from the finest grade of silicone materials and is fully characterized, validated and tested to a variety of specifications including USP Class VI criteria, ISO 10993 and European Pharmaco...
Sani-Tech STHT-R platinum-cured braid-reinforced silicone hose is an ultra-flexible, high-purity hose that was developed for higher pressure applications. STHT-R is manufactured with Sani-Tech 65 brand silicone resin. Sani-Tech STHT-R platinum-cured silicone hose resists temperature extremes, ozone, corona, radiation, moisture, compression sets, weathering and chemical attack and imparts no taste or odors to fluids transported within it. Sani-Tech STHT-R hose withstands repeated autoclaving and resists the adherence of bloodproducts and other sanitary fluids.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 3/32"" ID x 5/32"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, DEHP-Free Flexible PVC, 3/32"" ID x 5/32"" OD; 50 ft
Applications: Analytical instruments, general laboratory. Use for transfer of liquids, gases, and inorganic chemicals found in lab, paint, pigment, and soap dispensing applications. Characteristics:Nontoxic DEHP-free formulation. Flexible, small bend radii. Transparent; allows for visual inspection and flow monitoring. Certifications: FDA compliant, Proposition 65, REACH Temperature range: -58 to 165¿F (-50 to 73¿C) Sterilize: Autoclave.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 5/16"" ID x 7/16"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems Saint Gobain PFA Tubing, 3/8 x 1/2 in., 50 ft.
This PFA tubing offers excellent chemical and diffusion resistance, making it suitable for applications requiring ultrapure chemicals. It maintains high purity and mechanical strength at various temperatures, ideal for semiconductor, laboratory, and pharmaceutical environments.
- High level of purity for critical applications
- Excellent chemical and diffusion resistance
- Translucent for easy visual monitoring
- Retains high mechanical strength at elevated temperatures
- Resistant to stress cracking
- Wide temperature capabilities from -196°C to +260°C
- Non-corroding and non-oxidizing
- Outstanding dielectric properties
- Non-stick surface
- Autoclavable for sterilization
- Meets FDA requirements and USP Class VI standards
INDIANA FLUID SYSTEMS TECHNOLOGIES PFA TUBING 1/4 IN. OD X 0.047
NC2831621 PFA TUBING 1/4 IN. OD X 0.047
Vici Precision Sampling, Inc. HASTELLOY TUBING 1/16OD 10FT
HASTELLOY TUBING 1/16OD 10FT. Please be advised that a small cut/clean charge will be added to the invoice per the supplier