Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 5/16""ID"" ID x 7/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Accuflow Systems TuFlux TPE 1/8"x1/4" (1/8 x 1/4 inch, 3,2 x 6,4 mm)
Manufactured by Sartorius, TuFlux TPE ⅛” x ¼” (3.2 x 6.4 mm x wall thickness 1.6 mm) 1 coil = 200 m
Grainger Corrugated Tubing PE 3/4 in 25 ft
The split corrugated loom tubing from Grainger is a flexible plastic tubing used to bundle and protect wires and cables. It features a split down one side that allows for easy wire insertion without disconnecting. The tubing has a corrugated design which allows it to flex while still protecting contents. It is made from polyethylene and comes in sizes ranging from 1/4 inch to 2 inches in diameter. The tubing is UL recognized and can withstand temperatures from -20°F to 176°F. It comes in standard lengths of 25, 50, and 100 feet.
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-80 Tubing, 3/16"" (4.8) x 5/16"" (8.0), 50-ft pk
Applications: Pharmaceutical, biotechnology, and ultra-pure fluid processing. Characteristics: Semi-transparent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex or other organic additives. Pharma tubing is hydrophobic, and remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silicone to silicone tubing. Durometer, shore A rating of 75. Certification: Elastomer exceeds test guidelines for USP Class VI Plastics; tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) Requirements. Pharma tubing is produced under Bulk Pharmaceutical (BP) current GMP principals. <
Microsolv Technology Corporation Tubing, PTFE, 0.007" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.007" ( 0.18mm ) Pressure rating: 850 psi.
Enterprise Technology Solutions Dymo Labels,f/Labelmaker,Stock Rotation,2-1/8"x2-3/4",400/RL,WE
Food-industry professionals can see the freshness of stocked food at a glance with LabelWriter Stock Rotation Labels. They come in rolls preprinted with color-coded bars to indicate a specific day of week, allowing efficient rotation of new and old stock in commercial kitchens. Labels are safe to apply to metal and plastic food storage containers. Customize and select templates using the free DYMO Connect for Desktop software for your business's specific needs. Customize labels with added text, bar codes, QR codes and images so staff can easily process deliveries, dispose of food waste and return to other food-preparatory tasks.
Med Vet International Miltex Friedman Microsurgery Rongeur, 5-1/4in, 90 DEG, 1.3mm Jaws, 17D-4802
Miltex Friedman Microsurgery Rongeur, 5-1/4in, 90 DEG, 1.3mm Jaws, 17D-4802
UFP TECHNOLOGIES INC T-TUBE STRAIGHT 3FT LONG 2.0IN
UFP Technologies' straight, non-jacketed T-Tubes come in 3 ft sections. Item 102669 has a line OD of 2.00 inches.
UFP TECHNOLOGIES INC T-TUBE STRAIGHT 3FT LONG 1.0IN
UFP Technologies' straight, non-jacketed T-Tubes come in 3 ft sections. Item 101411 has a line OD of 1.00 inch.
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 10MM X 12MM - 25 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.