Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
US Plastic Corporation 5/16" ID x 9/16" OD x 1/8" Wall Excelon RNT Clear PVC Tubing
This clear tubing, with a dense, smooth bore, is made from the highest quality polyvinyl chloride (PVC) and special plasticizers without extenders or fillers. It is ideal for many applications in the laboratory as well as in chemical and industrial plants, and it has a minimum bend radius of 3x diameter.
Cole-Parmer Thermoplastic (SEBS) Tubing, 1/4" ID x 7/16" OD; 50 Ft
Designed for the most demanding biopharmaceutical applications, the thermoplastic SEBS (styrene-ethylene-butylene-styrene) tubing exhibits superior gas barrier properties and excellent pressure performance. Use the tubing in peristaltic pumps, single-use assemblies, process filling, and sampling devices.
Thermoplastic (SEBS) tubing does not contain BPA, phthalates, PVC, or peroxides that can leach out into the fluid, making it ideal for pharmaceutical applications, buffer and media preparation, and cell media processing. For an added level of particle control, a liner is placed between the tubing package and the box.
AVANTOR MASTERFLEX (VWR LLC) MF IP HP TUB PLAT CRD SIL 10FT
NC1911095 MF IP HP TUB PLAT CRD SIL 10FT
Med Vet International Dynarex Etco2 Nasal Sampling Cannula, 7' (2.1 M) Tubing w/Male Luer, Pediatric/Standard 02 Tubing Connector, 25/Case
Dynarex Resp-O2 EtCO2 Nasal Sampling Cannulas with Cushion Nasal Tips are designed to help monitor exhaled carbon dioxide during respiratory treatment. Each soft, cushioned cannula features a permanent barrier between the nasal prongs so that EtCO2 can be sampled from one nostril while oxygen continues to flow to the other nostril. Permanent barrier between nasal prongs allows for EtCO2 sampling with uninterrupted oxygen delivery Constructed from soft materials for added patient comfort Crush-resistant tubing helps prevent occlusion and kinking Features EtCO2 sampling line and O2 tubing of equal length Transparent design allows for clear visualization Not made with natural rubber latex or DEHP
Grainger Corrugated Tubing Nylon 3/4 in 100 ft
The Corrugated Loom Tubing from Grainger is a flexible, corrugated tubing designed to protect wires, cables, and hoses. It is made from polyethylene and has an inside diameter of 1 inch. The tubing features a spiral cut design for easy installation and removal. It is rated for temperatures from -20°F to 176°F. The tubing is sold by the foot and is available in lengths up to 100 feet. It can provide abrasion resistance and protection from liquids and contaminants. The corrugated design allows the tubing to be bent without kinking or collapsing. It is a cost-effective option for protecting and organizing wires and cables.
Cole-Parmer TPV Pharma Grade Tubing, 3/8" ID x 5/8" OD; 50 Ft
Use the biocompatible TPV tubing for peristaltic pumping, filling, and fluid transfer applications. This flexible opaque tubing offers excellent pump performance while providing great chemical resistance, making it a great alternative to silicone tubing.
TPV tubing does not contain BPA, phthalates, PVC, or peroxide that can leach out into the fluid, making it perfect for pharmaceutical, laboratory, and diagnostic applications. For an added level of particle control, a liner is placed between the tubing package and the box.
Accuflow Systems 1/2 Inch PTFE Smooth Bore Hose
1/2 In. ID PTFE Smooth Bore Hose Stainless Braided with Silicone Cover 24 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Norprene, 1/4"" ID x 1/2"" OD; 50 ft
This tubing is ideal for chemical, heat, ozone, and ultraviolet (UV) light resistance applications. Characteristics include nonconductive, heat-sealable, nonaging, nonoxidizing, with superior acid and alkali resistance. They are manufactured according to GMP. Temperature range is -75 to 275¿F (-60 to 135¿C). Can be sterilized with autoclave.