General HPLC Accessories
Waters Corp CORTECS C18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
CORTECS C18 Method Validation Kit, 90à , 2.7 µm, 3 mm X 50 mm, 3/pk
Waters Corp Column, Peptide HSS T3, 100 Å, 1.8 μm, 2.1 × 100 mm
The ACQUITY Premier Peptide HSS T3 column is engineered for the separation of small, polar peptides, providing superior retentivity compared to traditional hybrid particle technologies. It integrates MaxPeak High Performance Surfaces (HPS) to reduce problematic analyte/surface interactions, ensuring enhanced recovery, sensitivity, and reproducibility in peptide analysis.
- Minimizes analyte/surface interactions to prevent sample loss.
- Increases analyte recovery, sensitivity, and reproducibility.
- Mitigates the loss of metal-sensitive analytes.
- Reduces column conditioning and passivation times.
- Improves sensitivity and peak shapes.
- Allows for the use of simpler mobile phases.
- Saves time in method development.
- Enhances data confidence and reduces risk.
Waters Corp Stack Feet Kit, ACQUITY UPC2 CM-A, 1 pc
This product is a stack feet kit designed for use with the ACQUITY UPC2 CM-A system. It helps to stabilize and properly position the instrument within a laboratory setup.
- Designed for ACQUITY UPC2 CM-A system.
- Supplied as 1 piece.
THERMO SCI 3P AIG PARTS & ACCESSORIES SMPL LP ANA 100UL VPR MP35N
NC2058897 SMPL LP ANA 100UL VPR MP35N
Waters Corporation MALDI Imaging Target Plate, 5 per pack
Waters Corporation MALDI Imaging Target Plate, 5 per pack
Waters Corp RADIAN ASAP Direct Mass Detector, Single Quadrupole, Integrated ASAP Source
The RADIAN ASAP Direct Mass Detector is a dedicated direct analysis system for rapid, easy, and low-cost liquid and solid analysis. It uses single quadrupole mass spectrometry with an Atmospheric Pressure Solids Analysis Probe (ASAP) for quality and ease of use in a compact footprint. This enables direct MS analysis without complex sample preparation or MS experience.
- Simple operation and data interpretation
- Minimal sample preparation; no separation required
- Real-time results and classification
- Easy to learn, fully automated setup
- Direct sampling onto glass probe; minimizes solvent use
- Rapid 30-second analysis time
- Compact design
- Dedicated single quadrupole mass detector with integrated ASAP source
- Pre-optimized ASAP source for structural identification
- Automated mass calibration and resolution verification
- Programmable temperature control
Waters Corp HPLC Column, CORTECS Shield RP18 MV-Kit, 100 mm, 4.6 mm ID, 2.7 μm
This CORTECS Shield RP18 Method Validation Kit provides HPLC columns designed for reversed phase applications. These columns are 100 mm long, with a 4.6 mm inner diameter, and a 2.7 μm particle size, offering precise separation for analytical needs.
- Cortecs column description
- C18 (RP18, ODS, Octadecyl) package specification
- Inner diameter of 4.6 mm
- Reversed Phase (RP) mode
- Particle size of 2.7 μm
- Pore size of 90 Å
- Length of 100 mm
- L1 2 to 8 pH range
- Low silanol activity
- 100 m2/g surface area
- Endcapped
- Spherical particle shape
- Supplied as a 3-pack kit
Waters Corp BioResolve SCX mAb Method Validation Kit with VanGuard FIT, 3 µm, 2.1 mm x 100 mm, 3/pk with mAb Charge Variant Standard
BioResolve SCX mAb Method Validation Kit with VanGuard FIT, 3 µm, 2.1 mm x 100 mm, 3/pk with mAb Charge Variant Standard
Waters Corp CORTECS T3 Method Validation Kit, 120Å, 2.7 μm, 3 mm x 150 mm, 3/pk
CORTECS T3 method validation kits contain columns from three different batches, designed for 100% aqueous mobile phase compatibility and excellent retention of polar and non-polar analytes. Particle morphology provides high efficiency and lower backpressure. These columns deliver ultra-low MS bleed, long lifetimes, and excellent peak shape. All column documents, including COAs and eCords, are available online for easy access.
- Chemistry: C18
- Separation mode: Reversed Phase
- Particle substrate: Silica
- pH range: 2 pH to 8 pH
- Maximum pressure: 18000 psi (1240 Bar)
- Bonding technology: T3
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 120 Å
- Format: Method Validation Kit
- System compatibility: UPLC, UHPLC
- Particle technology: Solid Core
- Inner diameter: 3 mm
- Length: 150 mm
Waters Corp PATROL Sample Manager Priming Kit
This priming kit is designed for use with the PATROL Sample Manager (PSM) to facilitate the priming process. It is an essential component for the proper operation and maintenance of the ACQUITY UPLC Process Sample Manager system.
- Used to prime the Process Sample Manager (PSM)
- Facilitates the priming process
- Essential component for proper operation and maintenance
- Designed for use with the ACQUITY UPLC Process Sample Manager system
Waters Corp XSelect HSS Cyano (CN) Method Validation Kit, 100Å, 2.5 µm, 2.1 mm X 150 mm, 3/pk
This method validation kit consists of three XSelect HSS CN columns packed with three different batches of sorbent. The XSelect HSS Cyano column is a low coverage, unendcapped, highly stable cyano phase that provides low hydrophobicity for the rapid elution of hydrophobic analytes as well as alternate selectivity to traditional alkyl chain columns. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.
Waters Corporation XSelect HSS PFP Method Validation Kit, 2.5 μm
This kit features three columns packed with different batches of sorbent, utilizing a low coverage, unendcapped pentafluorophenyl phase. It offers exceptional separation and alternate selectivity to traditional alkyl chain columns, providing excellent performance for HPLC assays and a seamless transition to UPLC.
- Consists of three columns for method validation.
- Packed in ultra-low dispersion hardware.
- eXtended Performance (XP) columns with 2.5 μm particle size.
- Wide pH range: 2 to 8.
- Maximum pressure: 10000 psi (690 Bar).
- High silanol activity.
- Spherical particle shape.
- Parker-style endfitting.
- Pore size: 100 Å.
- Surface area: 230.
- Compatible with UPLC and UHPLC systems.
- USP classification: L43.
- Carbon load: 7%.
- Inner diameter: 4.6 mm.
- Length: 150 mm.
- Units per package: 3.
Waters Corp CORTECS C8 Method Validation Kit, 90Å, 1.6 μm
CORTECS C8 method validation kits provide columns of three different batches. These columns are used for general purpose method development under low pH test conditions. The C8 ligand is less hydrophobic and therefore less retentive compared to C18 phases.
- Chemistry: C8
- Separation mode: Reversed Phase
- pH range: 2 to 8
- Maximum pressure: 18000 psi (1240 Bar)
- Particle size: 1.6 μm
- Pore size: 90 Å
- System compatibility: UPLC, UHPLC
- Particle technology: Solid Core
- Inner diameter: 2.1 mm
- Length: 75 mm
- Units per package: 3
