Chromatography Supplies

Standards, connectors, fittings, tubing, tools, and other supplies for liquid chromatography (LC), ion chromatography (IC), and gas chromatography (GC).

New Lab Start-Up (20)
Offers (6)

special interests

Available on GSA/VA Contract (56)
Fast Shipping (66)
Greener Choice (4)
Production Products (66)
Science Education (1)
Small and Specialty Supplier (6,515)

Type

μ_Union (1)
1 Hour (1)
12 Hr/25°C (1)
120 V (1)
2-hole Ferrule (2)
2-way Connector (1)
220 V (1)

Show all

Material

100% Graphite (11)
15% Graphite, 85% Vespel (37)
316 Stainless Steel (Handle, Panel Nut, Bonnet Sleeve, Valve Stem, Bonnet, Body), PTFE (Lower Gland), Fluorine Rubber (O-Ring) (3)
40% Graphite, 60% Vespel (13)
Acrylic (1)
Aluminum (2)
Aluminum Oxide (1)

Show all

Diameter (Metric) Inner

0.050 mm (1)
0.051 mm (2)
0.053 cm (1)
0.075 mm (1)
0.076 mm (4)
0.1 cm (7)
0.1 mm (1)

Show all

Diameter (Metric) Outer

0.0317 cm (2)
0.15 cm (1)
0.158 cm (9)
0.2 cm (1)
0.275 cm (4)
0.3 cm (10)
0.317 cm (1)

Show all

Length (Metric)

< 8 cm Injector (1)
0.78 cm (2)
0.95 cm (2)
10 cm (1)
10.5 cm (23)
100 mm (7)
105 mm (45)

Show all

Product Type Specs

1078/1079 Split Liner with Frit (1)
Connectite Bottom Hole Liner (4)
Connectite Standard Liner (5)
Connectite Top Hole Liner (3)
Connnectite Bottom Hole Liner (2)
Connnectite Standard Liner (2)
Connnectite Top Hole Liner (2)

Show all

For Use With (Equipment)

0.020 in. Thru Hole (1)
0.050 in. Thru Hole; External Threads: 3/8-24 (1)
0.062 in. Compression Type Fitting, Fits Column 0.1, 0.15, 0.18, 0.25, 0.28 mm (4)
0.062 in. Compression Type Fitting, Fits Column I.D. 0.28, 0.32 mm (3)
0.062 in. Compression Type Fitting, Fits Column I.D. 0.45, 0.53 mm (3)
0.0625 in. Capillary Fitting (1)
0.0625 in. Compression Fitting Column 0.25 mm (1)

Show all

Liner Material

Borosilicate Glass (229)
Borosilicate Glass, CarboFrit (Closure Liner) (1)
Deactivated metal (3)
Glass (44)
Glass (Closure Liner) (1)
Graphite (5)
Highly Deactivated Borosilicate Glass (22)

Show all

Diameter (English) Inner

0.001 in. (3)
0.002 in. (5)
0.0025 in. (4)
0.003 in. (5)
0.004 in. (7)
0.005 in. (29)
0.006 in. (6)

Show all

Overall Length (Metric)

0.5 m (4)
1 m (14)
1.5 m (1)
1.524 m (9)
10 cm (13)
10 m (20)
100 cm (5)

Show all

Search Within Results

1,591 – 1,605 of 13,200 results

1,591

Vici Valco HOLDER-ASSY TUBE-FLANGING-TOOL

HOLDER-ASSY TUBE-FLANGING-TOOL

Pricing & Availability

1,592

Uline DOWN PULLER ASSEMBLY FOR FOOT-

5000140788 DOWN PULLER ASSEMBLY FOR FOOT-

Pricing & Availability

1,593

Uline FISKARSTRIMMING TOOL-BYPASS LO

5000141611 FISKARSTRIMMING TOOL-BYPASS LO

Pricing & Availability

1,594

MSC

5000799505 MED DUTY TOOL CINCH

Pricing & Availability

1,595

MSC

5000801666 DUAL WING TOOL CINCH

Pricing & Availability

1,596

Vici Valco VALVE ADPT FUSED SILICA TUBE E

VALVE ADPT FUSED SILICA TUBE E

Pricing & Availability

1,597

Microsolv Technology Corporation Ferrule Remover Tool

Ferrule Removal Saver Tool. For Stainless Steel Ferrules. MicroSolv Brand. 1/EA.

Pricing & Availability

1,598

Uline TOOL HOLDER SHELF

5000140782 TOOL HOLDER SHELF

Pricing & Availability

1,599

Waters Corp Waters Allen Wrench, 9/64 in.

This Allen wrench is a specialized hand tool designed for precision adjustments and maintenance. It is specifically sized at 9/64 in. for compatibility with various instruments and equipment.

Precision-machined for accurate fit
Used for installation, maintenance, and service
Designed for use with compatible equipment

Pricing & Availability

1,600

Grainger Threading Tool 1/4 Carbide

The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter and 1/4 inch maximum depth of thread. It has a 60 degree threading point angle and can cut unified coarse right hand threads from 4-56 to 1/4-20. The overall tool length is 3 inches and it weighs 0.04 lbs. This single point threading tool is made in the USA out of C2 grade high speed steel for good wear resistance. It is designed for use on lathes, screw machines, and CNC lathes for both production threading and general purpose workshop threading applications.

Pricing & Availability

1,601

Grainger Threading Tool 5/16 Carbide

The Grainger 5/16"-18 carbide straight flute machine tap is made of solid carbide for durability and has straight flutes for efficient chip removal. It is designed for hand or machine tapping of ferrous metals like steel, cast iron, and alloy steel. This tap features a standard plug chamfer and is suitable for blind holes. It has a spiral point tip to guide the tap and reduce thrust and friction. The tap has a bright finish for visibility and comes in a 3" length that can be used by hand or in a machine.

Pricing & Availability

1,602

Grainger Threading Tool 1/4 Carbide

The Grainger 16T170 is a 1/2 HP, 115V, 1725 RPM, 56C frame, open drip proof, single phase, ball bearing electric motor. It has a 1/2" diameter shaft with a 1/4" keyway and features a cast iron frame construction. This motor is thermally protected and suitable for continuous duty applications. With a NEMA design B configuration, it can provide 0.37 kW of output power. The 16T170 has a standard TEFC enclosure and meets IEEE 841 standards. This electric motor weighs approximately 25 lbs.