Chromatography Supplies
MilliporeSigma™ Supelco™ RheFlex™ PEEK Fittings Fitting Set, 1/8 in. Tubing
For Rheodyne valves. Hold to 5000 psi (350 kg/cm2).
MilliporeSigma™ Supelco™ Bottom-of-the-Bottle™ filter/sparger, pore size 2 μm
Bottom-of-the-Bottle™ filter/sparger is an accessory for use with Mobile Phase Reservoir System.
MilliporeSigma™ Supelco™ Tee bore 0.020 in., Thread 10-32
The PEEK tees are to be operated at 4000 psi (281 kg/cm2). They include Fingertight III nuts and ferrules.
MilliporeSigma™ Supelco™ Supeltex™ M-4 Packed Column Ferrule, 1/16 in.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Gripper fitting
Gripper fitting is used in sealing of the protein chip cartridge by screwing the plastic holder and connection tubing.
MilliporeSigma™ Supelco™ Swagelok™ Reducer, 200-R-4, Stainless Steel, 1/8 in., for tube 1/4 in.
Nuts and ferrules included.
MilliporeSigma™ Supelco™ Vacuum Adapter I.D. 10 mm
For procesing packed and empty dioxin columns and dual-layer reversible carbon tubes individually using vacuum pressure
MilliporeSigma™ Supelco™ Supeltex™ M-4 Packed Column Ferrule, 1/8 in.
Supelco has refined the design of these graphite ferrules to provide a clean, sharp profile with minimal flash.
MilliporeSigma™ Supelco™ Tubing Adapter 1/4-28 male UNF, for tube 1/4 in. O.D.
Tubing adaptor is a national pipe thread taper made up of stainless steel which is used to connect a female adaptor. It may be used to connect capillary tubes in HPLC, GC etc.
MilliporeSigma™ Supelco™ Supeltex™ M-2B Double-Tapered Ferrule, 0.10-0.25 mm to like I.D. Column
Max. Temp.: 350°C. Composition: DuPont VESPEL SP-211 (75% polyimide, 15% graphite, 10% PTFE). Characteristics: Conforms easily to capillary column, ensuring an effective seal and less chance of breakage.
MilliporeSigma™ Supelco™ Waters™ Fittings size 1/16 in.
Waters™ Fittings are used for connecting most HPLC columns to a 1/16 in. tubing system.
MilliporeSigma™ Supelco™ Stainless Steel 1/16 in. Capillary Tubing, Length: 30 cm
Use to connect the column to the detector compartment in a capillary gas chromatographic setup
MilliporeSigma™ Supelco™ Aura Mobile Phase Filter/Degasser Unit, No Reservoir
Easy-to-use Aura filter/degasser units simultaneously degas solvents and buffers and remove particles. Eliminates spurious peaks caused by gas bubbles in your detector, and prevent particle damage to check valves and other system components. A clean mobile phase also prolongs column life.
MilliporeSigma™ Supelco™ Swagelok™ Back Ferrule, 204-1, Stainless Steel, 1/8 in.
Swage type fittings are one of the most popular connectors which are available in metal and plastic forms; they are very useful for connecting similar or dissimilar materials, like metal to glass or metal to plastic.
MilliporeSigma™ Supelco™ Timestrip™ PLUS Indicators
Record elapsed time at or above a specified temperature threshold in a simple and quick way