Chromatography Supplies
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, HPLC Grade, Blue Stripe. 25 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Blue Stripe for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.75mm ID, 1/8" OD, Natural Color. 10 Meter Roll. 1 EA.
This wide outer diameter, Laboratory Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 5000 psi.
Microsolv Technology Corporation Tubing, PFA, 0.040" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PFA ( PerFlourAlkoxy ) low pressure tubing is very similar to Teflon but is less permeable, more transparent and performs better in high temperature and pressure. Higher temperature than FEP are possible. This tubing is used in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Also known as Teflon FEP.Do not use this tubing with heat over 260⁰C. Internal and Outer Dimensional Tolerance: +/- 0.10mm Color: Natural PFA, Transparent, slight light blue tint ID: 0.040" ( 1.0 mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Union, Connector Kits, High Pressure, 0.50mm Through Hole with 10-32 Screw Threads. Carbon PEEK, Straight Line with Connector Nuts. Use with 1/16" Tubing. 2/PK.
This "Union" is used to connect the same size PEEK or Stainless Steel tubing on both ends, in the high pressures zones of HPLC systems. Supplied with 2 Straight Line Unions and Four Finger Tightened Connectors (nuts). Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
Pfaltz & Bauer Silica Gel Grade 12 High Purit 1KG | 112945-52-5
Silica Gel Grade 12 High Purit 1KG | 112945-52-5
Microsolv Technology Corporation Ferrule, for use with Two Piece, High Pressure, Tubing Connectors for 1/16" PEEK Tubing. Universal Double Cone. 1 EA.
This Double Cone Ferrules will swage on to the PEEK tubing in two places for a great grip on the tubing. Also, when the MicroSolv Brand 2 Piece PEEK Tubing Connector is used, the shape of this ferrule will not twist the tubing when you turn the fittings.Use with any PEEK, 2 Piece, 1/16th" Tubing Connectors (Male Nuts).
Microsolv Technology Corporation Ferrules, for use with Two Piece, High Pressure, Tubing Connectors for 1/16" PEEK Tubing. Universal Single Cone. 10/PK.
This Single Cone Ferrule will swage on to the PEEK tubing in one place for a good grip on the tubing.Use with any PEEK, 2 Piece, 1/16" Tubing Connectors (Male Nuts).
Chemglass Life Sciences 1000mL Reservoir, Chromatography, 35/20 Lower Ball
1000mL Reservoir, Chromatography, 35/20 Lower Ball. Reservoir for use with CG-1199 and CG-1200 columns. Reservoir has a top 35/20 socket joint for use with CG-1201 flow control adapter and the listed size lower ball joint.
THERMO SCI 3P AIG PARTS & ACCESSORIES DYNASEAL POLYMER FERRULE 5PK
NC0278825 DYNASEAL POLYMER FERRULE 5PK
Microsolv Technology Corporation Caps Screw Blue P/S/P Septaca
Caps, Screw Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in knurled, polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. MicroSolv Brand. 1000/CS