Chromatography Tubing
Perkin Elmer US LLC Solvent to Syringe Pump Tubing - Qty. 1
PerkinElmer carries high quality replacement parts for the Spectrum and OilExpress autosamplers to keep these instruments at optimal performance.
Microsolv Technology Corporation Tubing, PTFE, 0.030" ID, 1/16" OD, Low Pressure, Green. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm. Color: Green. ID: 0.030" ( 0.75mm ). Pressure rating: 510 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.055" ID, 1/16" OD, HPLC Grade, Black Stripe. 5 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Black Stripe for 0.055" ( 1.4mm ) ID. Pressure rating: 750 psi.
Microsolv Technology Corporation HPLC Column Set, PEEK, 7.5mm ID. Includes, 1 EA 150mm x 7.5mm Column Tube, Black, 2 EA 5um Frits, 2 EA End Fittings. 1 EA.
This complete column set is made with Victrex PEEK and we add graphite to achieve the black color of the 5/8" OD Column Tube, which is not treated with any chemicals. The polished interior is achieved through a very careful, proprietary, extrusion method.
Microsolv Technology Corporation PEEK Tubing Drill 0.5mm. Stainless Steel Pin, Replacement for Flanging Tool. 1 EA.
This Drill is designed to flange the tips of thin walled, PEEK tubing when used with the MicroSolv Flanging Tool.