Chromatography Fittings
Electron Microscopy Sciences High Resolution Magnification Calibration Specimen 150-2DUTC with Pin
Model 150-2D is a very high resolution reference and traceable standards for magnification calibration of AFM, SEM, Auger, and FIB. It has a precision, holographic pattern that provides accurate calibration in the horizontal plane for very high resolution, nanometer-scale measurements.
The period is 144 nm pitch, two-dimensional array that is accurate to +/- 1 nm (calibration certificate will have actual pitch.) Surface: Aluminum bumps on Silicon, 4x3 mm die. Bump height (about 90 nm) and width (about 75 nm) are not calibrated.
For SEM an independent analytical lab has tested this specimen in a FE-SEM and found that the pattern was very uniform and the specimen was easy to image. No significant charging was observed in the voltage range 1-20 kV. This traceable, Certified Standard is a select grade.
Thermo Scientific nanoViper Fingertight Fittings | | 1 EA
- Virtually zero-dead-volume connections ensure optimal separation efficiencies- Preassembled and finger-tightened nanoViper fingertight fittings enable easy tool-free instrument setup and configuration and prevent overtightening- High-pressure tested to provide UHPLC compatibility up to 1200 bar (17400 psi)
IDEX Health & Science Upchurch VHP FTG 1/16IN OD 10PK
Idex Reusable One-Piece Very High Pressure Fittings, Diameter Outer: 0.0625 in., 0.159 cm, Description: Thread: 10-32 coned; Torque: 10 in.-lbs., Stainless Steel, Proprietary PEEK Polymer Blend, VHP Fitting, Black, Pressure: 25,000 psi
Chemglass Life Sciences 1in X 1in X 1/16in Thick Quartz Plate
1in X 1in X 1/16in Thick Quartz Plate. Commercial quality ground and polished clear fused quartz discs. Edges have a ground finished on all sizes. SIZES OTHER THAN THOSE LISTED ARE AVAILABLE. PLEASE CALL FOR INFORMATION.
Chemglass Life Sciences Fritted Disc, 40mm, Medium, Filter
Fritted Disc, 40mm, Medium Porosity, Filter. Porous discs for use in fabrication of special glass apparatus. Pressure Limits:Fritted glassware is designed for low pressure vacuum filtration or gas flow. The MAX differential pressure should not exceed 15 PSI.Thermal Limits:Fritted glassware should not be exposed to excessive temperature change or direct exposure to flame due to the fact that it has less resistance to thermal shock than standard borosilicate glassware.
THERMO SCI 3P AIG PARTS & ACCESSORIES NEEDLE SEAT CAP. 3.1UL VIPER W
501348254 NEEDLE SEAT CAP. 3.1UL VIPER W
Thermo Scientific Flow line sensor B to mixing Tee
Includes fittings. 1 kit. This kit DOES NOT include Tee (SC901)