Maintenance Lubricants and Penetrating Fluids
Uline Liquid Wrench White Lithium Lubricant | White | 1 EA
Outdoor lubrication that wont freeze melt or wash off, Reduces friction for metal-to-metal contact like hitches hinges and rails, Operates in sub-zero temps down to -40F, Rust inhibitor
MSC Mobil 110644 12.5 oz Cartridge Synthetic High Temperature Grease Red, High Temperature, NLGIG 1-1/2,
Mobil 110644 12.5 oz Cartridge Synthetic High Temperature Grease Red, High Temperature, NLGIG 1-1/2,
THORLABS INC Optical Adhesive for Bonding Glass to Plastic, 1 oz.
Optical Adhesive for Bonding Glass to Plastic, 1 oz.
GRACOROBERTS EPON Resin 828 Liquid Epoxy Resin, 1 GAL
EPON Resin 828 is an undiluted clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication and fusion technology.
Hampton Research HR2-928-A3/Grid Screen PEG/LiCl #A3, 185 ml - 0.1 M MES monohydrate pH 6.0, 1.0 M Lithium chloride
HR2-928-A3/Grid Screen PEG/LiCl #A3, 185 ml - 0.1 M MES monohydrate pH 6.0, 1.0 M Lithium chloride. Please note items from this supplier are non-returnable.
MSC Tri-Flow TF200271 16 oz (12oz Net Fill) Aerosol with PTFE Penetrant/Lubricant Brown, -60°F to 475°F
Tri-Flow TF200271 16 oz (12oz Net Fill) Aerosol with PTFE Penetrant/Lubricant Brown, -60°F to 475°F
Edmund Optics NORLAND OPTICAL ADHESIVE NO61
Adhesives; Norland Optical Adhesives No. 61; Edmund Indstrial Optics; 1 oz.; Clear; Viscocity 300 Cps
Electron Microscopy Sciences Santovac 5 for Ultra High Vacuum Range 100 ML
A Polymethyl Ether, designed for an ultra high vacuum range: 10-10 torr. Ultra low vapor pressure results in low ultimate pressures; there is no need for a cold trap and it is suitable for diffusion pumps. Santovac 5 may discolor with use but it will maintain its physical properties.
Cotronics Corp Resbond™ 907GF Adhesive & Sealant, 1 lb. Container (1/2 pint)
This item has a minimum order quantity of 3 per supplier requirements.
This moist, creamy putty is easily applied from standard caulking cartridges for use from -300F to 2300F. Just apply to steel, stainless, iron, most metals, ceramics, ceramic cloth, tapes, gaskets, tadpole gaskets, etc. Air dries in 4-12 hours at room temp. (curing may be accelerated with mild heat) and is resistant to most chemicals, solvents, oxidizing and reducing atmospheres, aging, thermal cycling and electricity. Use for bonding, sealing and repairing exhaust systems, fire brick, gas turbines, brazing fixtures, equipment, stacks, etc. Ideal for use in any high temperature Assembly, Production, Repair or Maintenance Application.
MSC Tap Magic 30016P Tap Magic ProTap 1 Pt Bottle Cutting & Tapping Fluid Semisynthetic, For Use on Ferrous Metals & Nonferrous Metals
Tap Magic 30016P Tap Magic ProTap 1 Pt Bottle Cutting & Tapping Fluid Semisynthetic, For Use on Ferrous Metals & Nonferrous Metals
MSC CRC 1003354 16 oz Aerosol Nondrying Film Penetrant Clear, 32°F to 300°F, Food Grade
CRC 1003354 16 oz Aerosol Nondrying Film Penetrant Clear, 32°F to 300°F, Food Grade
Electron Microscopy Sciences 509, Color: White. Softening: 125°F. Flow point: 130°F. Viscosity: 500 cps., 1/EA
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. Color: White. Softening: 125°F . Flow point: 130°F . Viscosity: 500 cps.