Labels and Label Makers
Beckman Coulter 460514, Rotor, A-4-38, Swing Bucket, 6 x 85ml
The Beckman Coulter Microfuge 18 Centrifuge is a compact benchtop microcentrifuge designed for quick spin downs and separations. It has a maximum speed of 13,300 rpm and maximum RCF of 16,060 xg. The rotor capacity is 18 x 1.5/2.0mL tubes. It has a compact footprint, digital display, 10 acceleration and braking rates, and a pulse key for short spin cycles. The Microfuge 18 is ideal for microcentrifuge applications in clinical, research, and testing labs.
HCL Labels Beware Cleanroom Product (Clear Film Liner) - 1" x 2" (Roll of 500)
Tapes and Labels, HCL Labels, Inc., Use this label to indicate that the product marked is only to be opened in a cleanroom environment. This product is on clear film liner and plastic cored, it can be cleaned for usage in a cleanroom environment.
Ted Pella Inc ELCO Tabs™, Carbon Conductive Tabs, 25mm OD, 54/pk
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible. The PELCO Tabs™ consist of a carbon fiber mat impregnated with a conductive adhesive. There is no internal carrier film. The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free.
Myltisystems LABEL 4"X2",WHITE,GLOSS QTY 24
LABEL 4"x2",WHITE,GLOSS POLYESTER, LINER SEMI-BLEACHED, ADHESIVE PERMANENT QTY24
Grainger Brady Sign, Polyester
The Brady Sign Polyester is a durable, weather-resistant polyester sign material ideal for indoor or outdoor use. It has a matte white finish that accepts a variety of inks and paints. The 12" x 50' roll has a thickness of .005" and features a permanent acrylic adhesive backing protected by an easy-release liner. It meets UL recognized requirements for outdoor use. This versatile sign material can be used for safety signs, facility identification, general signage and more.
Grainger Pipe Markr Anhydrous Ammonia 5in H 8in W
The Brady Pipe Marker fits pipe diameters from 1-1/2" to 14". It is made of vinyl cloth with a permanent acrylic adhesive backing. The marker is yellow with black text that reads "CHILLED WATER SUPPLY". It can withstand temperatures from -40°F to 200°F. The marker meets ANSI A13.1 and NFPA 99 standards for pipe marking. It has an easy peel liner for simple application. The marker measures 14" long x 5" wide. This pipe marker provides clear identification for pipes carrying chilled water.
HCL Labels Empty - California Compliant Label - 6" x 6" Adhesive Vinyl (Pack of 250)
Empty - California Compliant LabelHelpful for marking empty hazardous materials containers, as well as marking empty hazardous waste containers, pails, liners and barrels. This label includes a line for the date and the following verbiage, "This container must be reused, recycled or returned to the supplier within a year of this date. This container is empty by California standards (22 CCR 66261.7(b)). Empty means material can not be scraped or poured from this container."Please note: This item may come in a roll or pack depending on stock status and chosen delivery method. Printed on strong adhesive vinyl.
GA International PikaTAG, Label Applicator for 0.25" & 0.354" Dots, white. (Pack of 3). Contains 3 PIK-2WH applicators and 3 PIKPAD-1. 3 applicator/pack
This is an innovative new label applicator tool that allows you to quickly pick-up small labels from their liner and easily apply them on vial tops, including indented vials caps, or any other surface to be labeled. Easy to handle and use, simply remove the protective cap, use the PikaTAG to “pick” a label, and apply it to the desired surface. Its unique ergonomic design allows for the precise application of pressure at both stages of the labeling process. Each PikaTAG allows the application of upwards of 200 labels (100 per end) when the protective cap is replaced after each use.
GA International PikaTAG – Label Applicator for 0.25" & 0.354" Dots, white, Contains 1 PIK-2WH applicator and 1 PIKPAD-1. 1 applicator/pack
This is an innovative new label applicator tool that allows you to quickly pick-up small labels from their liner and easily apply them on vial tops, including indented vials caps, or any other surface to be labeled. Easy to handle and use, simply remove the protective cap, use the PikaTAG to “pick” a label, and apply it to the desired surface. Its unique ergonomic design allows for the precise application of pressure at both stages of the labeling process. Each PikaTAG allows the application of upwards of 200 labels (100 per end) when the protective cap is replaced after each use.
GA International Thermal-Transfer / Direct Thermal Desktop Printer #Cody-3
Cody-3™ GA International Thermal-Transfer / Direct Thermal Desktop PrinterPrint Method: Thermal Transfer/Direct ThermalResolution: 300 dpiPrint Speed up to: 4″/s (102 mm/s)Print Width up to: 4.16″ (105.7 mm)Label Width: 0.79″ – 4.64″ (20 – 118 mm)Label Height: 0.16″– 30.0″ (4 – 762mm)Label Material Thickness: 0.003″ – 0.01″ (0.076 – 0.2 mm)Liner Material Width: 0.79″ – 4.64″ (20 – 118 mm)Roll Outer Diameter: 5″ (127 mm)Roll Core Diameter: 1″ – 1.5″ (25.4 – 38.1 mm)Interfaces: USB 2.0, Serial (RS232), Ethernet 10/100, USB Host
STAPLES ADVANTAGE Scotch Double Sided Tape with Dispenser, Narrow Width, Engineered for Bonding, 1/2" x 7 yds., 3/Pack Caddy
Scotch Double Sided Tape 3136, 1/2" x 250" provides a no-mess alternative to glue for light duty attaching and mounting tasks.Scotch Double Sided Tape adheres to papers and poster boards and does not show for a professional appearance. This mounting tape has no liners so it is easy to use and hassle-free.Scotch Double Sided Tape mounts and attaches documents cleanly1/2" x 6.94 yds.Scotch Double Sided Tape is the perfect clear tape for light duty mountingScotch Double Sided Tape has a strong adhesive on both sides to easily join documents1" CoreScotch Tapes are photo-safe in accordance with ISO standard 189163/PackMade in the U.S.A. from globally sourced materialsAll Scotch Tapes are designed to pull smoothly from the roll and cut easily
GA International DYMO-Compatible Cryogenic Labels with SimPEEL™ Technology (Patent Pending) 1" x 1" / 25.4mm x 25.4mm Rectangle Grey From -196°C to +70°C (-320.8°F to +158°F)
DYMO-compatible cryogenic labels, featuring our new SimPEEL™ technology that makes them even easier to peel from their liner. Perfect for identifying small diameter cryo vials, tubes, and boxes, their innovative adhesive-free tab ensures they won’t stick to your glove or hands for hassle-free application. These direct thermal printable labels are designed to withstand long-term storage in low-temperature freezers (-80°C/-112°C), liquid nitrogen tanks (-196°C/-321°F), and for transportation on dry ice. Perfect for tracking samples with 1D and 2D barcodes or identifying vials with serialized data and variable text.*SimPEEL™ can be integrated into most DYMO-Compatible labels. Please contact us for more information.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage with SimPEEL™ Technology (Patent Pending) 1" x 1" / 25.4mm x 25.4mm Rectangle White From -196°C to +110°C (-321°F to +230°F)
Cryogenic labels for identifying small diameter cryo vials, tubes, plates, cardboard freezer boxes, polypropylene cryo-boxes, and plastic bags. These cryo labels feature our new patent-pending SimPEEL™ technology, making peeling them off their liner quick and easy. Their innovative adhesive-free tab design also makes the label’s application on their destined container hassle-free, as they won’t stick to your hands or gloves, eliminating in this fashion adhesive contamination. Ideal for routine, high-volume container identification in hospitals, clinics, blood collection centers, biotechnology companies, biorepositories, and others. They are designed for long-term cryo storage under cryogenic laboratory conditions, including liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and for dry ice transport. Labels can be printed with all major brands of thermal-transfer printers.
GA International Cryogenic Barcode Labels for Liquid Nitrogen Storage with SimPEEL™ Technology (Patent Pending) 1" x 0.75" / 25.4mm x 19.1mm Rectangle White From -196°C to +110°C (-321°F to +230°F)
Cryogenic labels for identifying small diameter cryo vials, tubes, plates, cardboard freezer boxes, polypropylene cryo-boxes, and plastic bags. These cryo labels feature our new patent-pending SimPEEL™ technology, making peeling them off their liner quick and easy. Their innovative adhesive-free tab design also makes the label’s application on their destined container hassle-free, as they won’t stick to your hands or gloves, eliminating in this fashion adhesive contamination. Ideal for routine, high-volume container identification in hospitals, clinics, blood collection centers, biotechnology companies, biorepositories, and others. They are designed for long-term cryo storage under cryogenic laboratory conditions, including liquid nitrogen (-196°C/-321°F), freezers (-80°C/-112°F), and for dry ice transport. Labels can be printed with all major brands of thermal-transfer printers.
- 1
- 2