Sorbents and Adsorbents

Sorbents are insoluble materials designed to pick up and retain liquids (through absorption) causing them to swell; an adsorbent is a material that permits liquids to adhere to its surface.

391 – 405 of 558 results

391

ULINE INC 3P 15X19IN HIGH VIS SORBENT PADS

50-299-7308 15X19IN HIGH VIS SORBENT PADS

Pricing & Availability

392

ULINE INC 3P 30INX150FT HEAVY SORBENT ROLL

50-299-8849 30INX150FT HEAVY SORBENT ROLL

Pricing & Availability

393

MSC PRO-SOURCE 28-2150 50 Lb Bag Environmentally Safe Pellet-Form Ice & Snow Melter & De-Icer Effective to 0°F, Calcium Chloride, Potassium Chloride, Sodium Chloride

PRO-SOURCE 28-2150 50 Lb Bag Environmentally Safe Pellet-Form Ice & Snow Melter & De-Icer Effective to 0°F, Calcium Chloride, Potassium Chloride, Sodium Chloride

Pricing & Availability

394

Accuflow Systems UNDERPAD,300/CS 17X24 COVIDIAN

Covidian Underpad 17 in. X 24 in. 300/CS, Tendersorb,Fluff Filled…Used as a liner on benchtops or hoods or any space you want protected.

Pricing & Availability

395

Sorbent Technologies Inc Silica Gel, Premium Rf, 60A, 40-75um, 500g

Silica Gel, Premium Rf has a porosity of 60A, particle distribution of 40-75um, and a quantity of 500g. It is used as the stationary phase for traditional Flash Chromatography Columns. Premium Rf (Resolution Factor) silica gel is the highest quality granular silica gel on the market. This high-purity product provides narrow particle and pore distribution and is designed to increase yield, making it ideal for complicated separations both in the lab and in full-scale production.

Pricing & Availability

396

Sorbent Technologies Inc Alumina, Basic, Act. I, 50-200um, 5kg

Alumina Basic, Standard Activity I is a good all-purpose adsorbent for laboratory as well as process use. It has a pH of 10, a particle distribution of 50-200um, and a quantity of 5kg. The starting activity level of Alumina, Standard Activity I is about half as high as Alumina, Activity Super I and can be deactivated by the addition of polar media (water, alcohols, etc.) according to the deactivation scale. Standardized manufacturing processes provide a specific Brockmann dryness level for lot to lot reproducibility and precise deactivation possibilities. The Loss on Ignition (LOI) is 1.7 +/- 0.2% and the specific surface is ~150 m2/g. The adsorption behavior is extremely constant. Alumina Basic, Standard Activity I may be used for the purification of solvents. Applications include: Alkaloids, essential oils, plant extraction, purification of organic solvents, insecticides, clarification of fatty oils, removal of alcohol from chloroform

Pricing & Availability

397

Hach Company Soaker Bottle for Electrode Storage

Soaker Bottle for electrode short-term and long-term storage. Using soaker bottle for electrode storage prevents reference junction and/or sensing element from drying out to ensure best performances.

Pricing & Availability

398

Microsolv Technology Corporation Mats, Sealing, Large, Silicone Rubber, Pre-Slit, Plug Style for 96, 500 and 1000ul Inserts. 5/CS.

Mats are made of ultra pure Silicone Rubber, designed and molded to seal up to 96 each 500ul and 1ml Inserts in the U-2D Micro-Sample Management System. These mats are Pre-Slit and have alphanumeric markings on the top side of the mats, along the edges for identification of the Inserts. Use with Aqueous Solutions.

Pricing & Availability

399

Microsolv Technology Corporation Mats, Sealing, Chemical Resistant Polymer, Plug Style for 96, 350ul Inserts. 5/CS.

Mats are made of a chemically resistant polymer that can be used with typical HPLC organic solvents. Designed and molded to seal up to 96 each 350ul Inserts in the U-2D Micro-Sample Management System. These mats are not Pre-Slit and have alphanumeric markings on the top side of the mats, along the edges for identification of the Inserts.

Pricing & Availability

400

Microsolv Technology Corporation Mats, Sealing, Large, Chemical Resistant Polymer, Plug Style for 96, 500 or 1000ul Inserts. 5/CS.

Mats are made of a chemically resistant polymer that can be used with typical HPLC organic solvents. Designed and molded to seal up to 96 each 500ul or 1ml Inserts in the U-2D Micro-Sample Management System. These mats are not Pre-Slit and have alphanumeric markings on the top side of the mats, along the edges for identification of the Inserts.

Pricing & Availability

401

Microsolv Technology Corporation Mats, Sealing, Silicone Rubber, Pre-Slit, Plug Style for 96, 350ul Inserts. 5/CS.

Made of ultra pure Silicone Rubber, this mat is designed and molded to seal up to 96 each 350ul Inserts in the U-2D Micro-Sample Management System. This mat is Pre-Slit and has alphanumeric markings on the top side of the mat, along the edges for identification of the Inserts.

Pricing & Availability

402

Essendant Rubbermaid Commercial Hinged Dome Tilt Truck Lid, 31.75w x 61d x 8.75h, Black

The Rubbermaid Commercial Domed Lid keeps materials secure inside Rubbermaid Commercial tilt trucks The domed lid safely conceals the load without reducing capacity Works on most Rubbermaid tilt trucks Lid Type- Dome Truck Lid Material(s)- Plastic Color(s)- Black Color Family- Black

Pricing & Availability

403

Essendant PAPER24 PERFED 3 2/3

Micro-perforations make this paper ideal for printing healthcare forms medical charts invoices statements remittance coupons and more Custom-cut sheets ensure minimal wastage ColorLok Technology delivers bolder blacks and more vivid colors with inkjet printing and better overall quality and performance with laser printing Compatible with copiers laser and inkjet printers as well as plain paper fax machines Sheet/Roll Size- 8 5x11 Paper Basis Weight (lb)- 24 lb Bond Paper/Media Color(s)- White Color Family- White

Pricing & Availability

404

Andwin Scientific FORMAGO FORMLIN NEUTRLZER 16CS

The Tissue-Tek FormaGO Formalin Neutralizer features 18% more absorption of formalin and 2-3 times faster neutralization of formalin in as little a 5 minutes. It is sold in a case of 16.