Medical Syringes
Products and replacement parts for use with medical syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers.
Medical syringes are used for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.
General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic medical syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability.
Barrels are normally graduated and transparent so that the contents are clearly visible. Syringe capacities may range from 1 mL up to 50 mL or more. Syringe fittings may be ‘Luer slip’, in which case they have simple ‘push-on’ terminals that hold needles in place just by friction, or ‘Luer-lock’, which twist and lock needles in place for a more secure fit. Luer fittings can be concentric (central to the barrel) or offset (acentric or eccentric).
Applications of Medical Syringes:
• General liquid sampling, transfer, or aspiration
• Clinical injection or sampling of blood or other fluids
Chemglass Life Sciences Syringe, Micro, 25uL Capacity, Fixed Needle, 22s Gauge
Syringe, Micro, 25uL Capacity, Fixed Needle, 22s Gauge. Basic micro syringe used for the precise liquid delivery in volumes of 10 to 100uL. The accuracy of these syringes is ± 1% of the total volume with the repeatability of dispensed volume being ± 1%. This precision and accuracy is a direct result of the close tolerances of the stainless steel plunger rod, custom shrinking and polishing of the glass bore. Each syringe plunger is individually hand fitted, assembled into the glass bore and tested to be liquid tight to 80 PSI. The plungers and barrels are not interchangeable.
Hanna Pharmaceutical Supply Co., Inc. IV CATHETER JELCO 20GX1.25""
Catheter 20GX1-1/4" Jelco IV Straight Pink 50/BX
Please note: This item is nonrefundable, non-returnable and non-cancelable once order is placed.
BECTON DICKINSON INFUSION THERAPY Angiocath Peripheral Venous IV Catheter, 20 G x 1.16""""
20 G x 1.16 in. BD Angiocath peripheral venous catheter (1.1 mm x 30 mm) made of FEP polymer.
McKesson General Medical Needle, Hypo 27gx1/2" (100/bx)nipmed
Needle, Hypo 27gx1/2" (100/bx)nipmed ** THE SUPPLIER OF THIS ITEM REQUIRES A MEDICAL OR PHARMACY LICENSE PRIOR TO PURCHASING. **
BECTON DICKINSON INFUSION THERAPY 16 GX1.16 IN INSYTECATH 200 RX
NC1061688 16 GX1.16 IN INSYTECATH 200 RX
Organomation One Dozen 4in. X 16ga. Stainless Steel Needles
Set of one dozen luer lock needles. These needles are 4 inch by 16 gauge, with a 304 stainless steel shaft and a chrome plated brass hub.
Hanna Pharmaceutical Supply Co., Inc. Spike Bag Smartsite
Spike Bag 0.47 ml, 1 Port, Adapter, NonDEHP 100/CS
Please note: This item is nonrefundable, non-returnable and non-cancelable once order is placed.
BECTON DICKINSON INFUSION THERAPY 16GX1.77IN INSYTE AG CATHETRRX
NC1484405 16GX1.77IN INSYTE AG CATHETRRX
Chemglass Life Sciences Syringe, Polypropylene, 3mL Capacity, Centric Tip
Syringe, Polypropylene, 3mL Capacity, Centric Tip. These all-polypropylene syringes are latex free and contain no rubber or silicone. The plastic plunger has a smooth draw and a positive safety stop to prevent accidental spills. Syringes are individually sterile strip packed. The Luer tip for the 3mL sizes is centric to the barrel.
Chemglass Life Sciences Syringe, Micro, 100uL Capacity, Removable Needle, 22s Gauge
Syringe, Micro, 100uL Capacity, Removable Needle, 22s Gauge. Basic micro syringe used for the precise liquid delivery in volumes of 10 to 100uL. The accuracy of these syringes is ± 1% of the total volume with the repeatability of dispensed volume being ± 1%. This precision and accuracy is a direct result of the close tolerances of the stainless steel plunger rod, custom shrinking and polishing of the glass bore. Each syringe plunger is individually hand fitted, assembled into the glass bore and tested to be liquid tight to 80 PSI. The plungers and barrels are not interchangeable.