Medical Syringes
Products and replacement parts for use with medical syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers.
Medical syringes are used for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.
General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic medical syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability.
Barrels are normally graduated and transparent so that the contents are clearly visible. Syringe capacities may range from 1 mL up to 50 mL or more. Syringe fittings may be ‘Luer slip’, in which case they have simple ‘push-on’ terminals that hold needles in place just by friction, or ‘Luer-lock’, which twist and lock needles in place for a more secure fit. Luer fittings can be concentric (central to the barrel) or offset (acentric or eccentric).
Applications of Medical Syringes:
• General liquid sampling, transfer, or aspiration
• Clinical injection or sampling of blood or other fluids
Electron Microscopy Sciences Gatan 3View SEM Pin Stubs Large, 2.4 mm Head, 2 x 12.5 mm Pin
The Gatan 3View systems use special sample pins. These are used inside SEMs to create 3D imaging data of samples by serial slicing and BSD imaging. These pins are fully compatible with the Gatan 3View systems; 2 mm pin, 3 mm head with cone top and total height of 12.5 mm. Manufactured from vacuum grade aluminium.
Head: 2.4 mm
Pin: 2 x 12.5 mm
Perkin Elmer US LLC prepFAST M5 Line Valve Assembly
prepFAST Line/Valve Assembly with one P7+ prepFAST Valve, one P6 FAST valve and one 8 port syringe valve and one 4 port syringe valve
Trajan Scientific Syringe Metal 10uL Fixed Needle 6/PK
10 L fixed needle syringe with Superflex plunger and 5 1 cm 0 72 mm OD LC tipped needle PK6
Med Vet International Suction Device Little Sucker Standard Style Thumb Valve Vent, N205, 50/Case
Suction Device Little Sucker Standard Style Thumb Valve Vent N205 50/Case
Research Products International Corp Combi-Syringes, Non-Sterile, Combo Pack, 20 Each: 0.5ml, 1.25ml, 2.5ml, 5.0ml, 12.5ml, 100 per Case
Combi-Syringes are refillable sample reservoirs designed for use with original Eppendorf Repeater pipettors. This product is not compatible with Eppendorf Repeater plus pipettors. Syringes are made of polypropylene and have polyethylene plunger. Syringe has sufficient capacity to dispense up to 5 different repetitive sample volumes. Autoclaving is not recommended. Packaged 100 per case.
Med Vet International Nipro Syringe & Needle, 5mL, Luer Lock, 20g X 1", Hypodermic, 100/Box, Jd+05L2025
Nipro JD+05L2025 5mL Syringe & Needle Combo comes with a clear barrel and easy to read graduation marks. The Luer Lock tip of this 5mL syringe fits conventional and safety needles. This Nipro JD+05L2025 Syringe & Needle Combo comes with a 20G X 1" Thin Wall needle. Thin wall needles are thinner than regular wall needles. The outside diameter is the same size. However, the inside diameter is bigger than the regular wall's inside diameter. Thin wall needles allow rapid and efficient drug delivery. This hypodermic needle is a hollow needle used for withdrawing fluid like blood samples, or injecting medications. This quantity is 100/BX
Electron Microscopy Sciences Multi Pin Holder Hitachi, M4 for 49 stubs
This 117 mm in diameter multi pin holder is designed to save time It is made from machined aluminum with 302 stainless steel springs that hold the pin stubs in place. It accommodates up to forty nine standard 12.7 mm (1/2") pin stubs.
Chemglass Life Sciences Syringe, Micro, Gas-Tight, 1.25mL capacity, PTFE Luer Lock
Syringe, Micro, Gas-Tight, 1.25mL capacity, PTFE Luer Lock. Syringes are designed for use in both liquid and gas chromatography. Due to the all-PTFE tip, they can also handle highly corrosive or Ultra-pure liquids. With the exacting tolerances held in the manufacture of these syringes, all components are interchangeable within each size range.PLEASE NOTE: PTFE LUER TIP OR LUER LOCK SYRINGES ARE NOT SUPPLIED WITH NEEDLES. FOR NEEDLES SEE CG-3075.
Med Vet International Jorvet 8-1/2in. Filler Needle, for 5cc Vetamatic Syringe, J0053VD24C
Replacement 8-1/2in. Filler Needle, for Replacement 5cc Vetamatic Syringe
Med Vet International Jorvet Barrel, for 5cc M86 Ferromatic Syringe, J0053FD02M
Replacement Barrel, for Jorvet 5cc M86 Ferromatic Syringe