Animal Surgical Equipment Accessories
Braintree Scientific 9mm Autoclip Remover
Autoclip Wound Closing System - The Autoclip Applier works like a staple gun to rapidly apply Autoclip closures. The applier will hold 20 Autoclips, which are held firm and ready for use by rustless beryllium-copper springs. Autoclips provide maximum holding force with minimal trauma. There is no need for assistance to operate the applier or remover. When the wound is healed, clips are easily removed with the Autoclip Remover. Stainless steel Autoclips are non-pyrogenic and supplied non-sterile, but may be autoclaved. Ideal for use with laboratory mice and rats. **Sold for research purposes only and not for human use**
PROFESSIONAL PRODUCTS AND MORE BRAVMINI CORDLESS PET TRIM PUR
WAHL BRAVMINI CORDLESS PET TRIMMER PURPLE
Innovative Reseach Of America 17BETA ESTRADIOL 1.7MG 25PELL
17beta-Estradiol, For tumor growth and regression in immuno-deficient mice, 90-day release pellet, Total Dose: 1.7mg/PK, Pellet Size: 3mm
Instech Sterile Catheter Flush Solution, Saline (0.9% NaCl), 50 pcs (10 packs of 5) 1mL in 1mL Syringe, PinPort™ Injector
Pharmaceutical-grade catheter flush/lock solution prefilled into syringes following the USP <797> standard for compounding sterile preparations. The solution contains Normal Saline (0.9% NaCl), USP, Sterile Grade. Each 1 mL B-D slip fit luer syringe is filled to 0.5 mL and capped with a sterile PinPort™ Injector. The syringes are sealed to maintain sterility of the contents and provided in quantities of 50 (10 packs of 5).
AAALAC recommends that pharmaceutical-grade compounds be used in laboratory animal research when available.
Unused prefilled syringes may be stored for up to one (1) year from date of manufacture before expiring. The expiration date is listed on the product label.
For laboratory animal research only. Not approved for human use.
Features
- Preinstalled PinPort™ Injectors; Ready-to-Use with VABs™ and PinPorts™
- Pharmaceutical-Grade
- Sterile Filtered
- Presevative-Free
Euthanex SMALL LID GASKET KIT
E-20028 Small Lid 16″ L x 10″ W. Fits newer style mouse cages and smaller size cages
Rod mounting clamp for Instech P720 peristaltic pumps.
The Instech P720/RMC is a rod mounting clamp designed to secure any of the P720 series peristaltic pumps to standard laboratory ring stands or lattice frames. This allows the pump to be positioned at the ideal height and orientation for laboratory setups such as tissue perfusion or continuous infusion.
Features
- Type: Laboratory rod mounting clamp
- Compatibility: Fits all P720 series pumps, including the P720, P720/10K, and P720/66
- Function: Securely attaches the pump to standard 0.5in (12.7mm) laboratory rods
- Application: Frees up bench space and allows for precise positioning near the subject or organ chamber
- Installation: Attaches to the rear of the pump housing using existing mounting points
Tube sets for Instech P720 peristaltic pumps, .062in ID silicone, straight through configuration (P720/NCA fittings required), 1ft (30cm) long. Package of 5, nonsterile.
The Instech P720/TS‑093S is a 1ft (30cm) straight‑through tube set for P720 peristaltic pumps, made with .093in ID silicone tubing to support higher flow applications. Used with P720/NCA fittings, these non‑sterile tube sets provide connector‑free inlet and outlet routing and are supplied in packs of five for smooth and reliable fluid transfer in research workflows.
Features
- 1ft (30cm) length for flexible pump integration
- .093in ID silicone tubing for higher flow ranges
- Straight‑through design for P720/NCA fittings
- Packaged in sets of five, non‑sterile
- Compatible with all P720 peristaltic pump models
Instech Stainless steel catheter / tubing coupler, 23ga x 8mm. Nonsterile. Package of 100.
The Instech SC23/8 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 23ga and 8mm in length, it provides a compact, secure, low‑dead‑volume junction suitable for small‑animal infusion and sampling workflows. The rounded edges protect tubing from damage, and the couplers are supplied non‑sterile in packs of 100 for laboratory use.
Features
- 23ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Connects implanted catheters to external infusion lines
Instech Stainless steel catheter / tubing coupler, 22ga x 8mm. Nonsterile. Package of 100.
The Instech SC22/8 is a stainless steel catheter coupler used to join implanted catheters to external infusion tubing. Sized at 22ga and 8mm in length, it provides a compact, low‑dead‑volume connection suitable for small‑animal infusion setups. The rounded edges help prevent tubing damage, and it is supplied non‑sterile in packages of 100 for laboratory use.
Features
- 22ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Used to connect implanted catheters to external infusion lines