PCR Tubes
STAPLES ADVANTAGE 125PK OF 10" PAPER PLATES
Dixie Ultra Pathways Heavy-Weight Paper Plates, 10”, 125/Pack
TWD Scientific LLC Pcr Tube & Cap, Twdbiox, 0.2Ml, Polypropylene, Thin Wall Tube, Clear Flat Top Cap, Strips Of 8, 1250/Case.
BioX 0.2Ml Clear Polypropylene Thin Wall Pcr Tubes With Clear Flat Top Strip Caps Attached. Tubes & Caps Come In Strips Of 8. 125 Strips/Pack, 10 Packs/Case, Price/Case
Mascon Medical PCR Plate, 96-well, 0.2 mL, Semi-Skirted, ABI, Clear, 10 pcs/pack, 5 packs/case
96-Well,flat top PCR microplate is designed to fitstandard 96 well blocks.Ultra-thin and consistentwall thickness allows precise thermal transfer foroptimum results.Can be sealed with 8/12 strip capsor sealing film.96-Well Polypropylene PCR Microplate, Compatible with ABI, Semi-skirted, Non-sterileFeaturesSuitable for 0.1 mL/0.2 mL thermal cycler blocksApplication:PCR,qPCR/Real-Time PCR
Alkali Scientific ProCycle™ SnapStrip 8-Strip Tubes with single easy cut connectors and individually attached Flat Caps, Clear, 120 x 8, 960/Pk
The StableStrip™ 0.2 ml 8-strip PCR tube incorporates individually attached caps (flat or domed) for more convenience. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultra-thin sidewalls and bottoms for more uniform and efficient temperature transfer. This PCR reaction strip is available with either flat (needle pierceable) or dome-topped individually attached hinged caps. While easily opened and closed with one hand, their positive sealing will fully protect the contents from evaporation during the whole thermal cycle. The cap has an integral seal preventing contamination with surface of lid.While more easily handled than single tubes, the 8-strip PCR tubes will precisely fit standard well spacing and can also be used with multi-channel hand-held pipetters. Manufactured under the most stringent conditions to attain the highest quality standards in the industry.Tubes are made of ultra-clear polypropylene plastic and
Bellco Glass, Inc. Thermowell Pipe Assembly , 3L For 10mm Port
Stainless steal Thermowell holds liquid and RTD temperature sensor for recording internal bioreactor temperature. Signal is read by temperature controller and heating blanket temperature increases and decreases as required to maintain temperature setting. Fits into 10mm port on 3L metric headplate.. MADE IN THE USA
Alkali Scientific ProCycle™ PCR Tubes, Individual 0.2mL Flat Cap, 1000/cs
Designed for oil-free operation, these tubes are made of transparent superior quality grade polypropylene for better viewing of the contents. Their ultra-thin wall design will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Attached hinged caps are flat-topped and can be used with heated thermal cycler lids. They provide positive sealing during thermal cycling and will prevent evaporation while being easily opened and closed with one hand. The cap has an integral shield preventing contamination with surface of lid. Frosted writing surface for sample identification. Packaged in tamperproof resealable safety-lock bags. 1000/pk
Chemglass Life Sciences Domed 8-Strip PCR Cap Strips, Clear, Sterile - for 0.2 mL 8-strip PCR tubes, 125/pack
Domed 8-strip PCR cap strips provide secure, low-evaporation seals for 0.2 mL PCR strip tubes used in thermal cyclers and real-time PCR instruments. Supplied sterile in nests and molded from USP Grade VI polypropylene, they offer efficient heat transfer and reliable leak resistance for reproducible amplification results.
- Pack size: 125 per pack.
- Made from USP Grade VI polypropylene.
- Compatible with most thermal cyclers and real-time PCR instruments.
- Thin-walled design for improved thermal conductivity.
- Domed cap design reduces liquid evaporation.
- Easy-to-open, leak-resistant caps with reaction loss under 0.2%.
TWD Scientific LLC Pcr Tube & Cap, Twdbiox, 0.2Ml, Polypropylene, Thin Wall Tube, Clear Flat Top Cap, Strips Of 8, 1200/Case.
BioX 0.2Ml Clear Polypropylene Thin Wall Pcr Tubes With Clear Flat Top Caps. Strong Link Between Tubes With Cap Hinge At 45º Angle. Tubes & Caps Come In Strips Of 8. 120 Strips/Pack, 10 Packs/Case, Price/Case
Bellco Glass, Inc. Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Fit through a 5/1
Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Fit through a 5/1
Bellco Glass, Inc. Thermowell Assembly ,3L For Angled Sidearms
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. MADE IN THE USA. •Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port•5/16" od thermowell tube,1/4" siphon and vent tubes•Includes 45mm pp cap and silicone gasket•Seam welded and electropolished•Longest tube length:6"
Chemglass Life Sciences 0.2mL PCR 8-Strip Tubes, White, 125/Pk
USP grade VI PolypropyleneLow profile tubes are designed to minimize the condensate contamination, particularly for overnight experiments, and also reduce the evaporation of the reaction solution.Free of Dnase and Rnase, human DNA and PCR inhibitorAutoclavableWhite strip tubes increase the fluorescent signal strength of real-time PCR