Rockers and Rotators
Alkali Scientific H2505-70 SureTemp 70L Lab Incu
The new Alkali ScientificH2505-70 SureTemp lab incubator from Alkali Scientificis simple to use for general lab incubation but also equipped with the SureCheckdata logging system for verification of chamber temperature when a high level of precision is needed The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive The data can then be viewed and saved using the included the SureCheck software The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping The Alkali ScientificH2505-70 SureTemp incubator offers Dual-Convection technology allowing the user to choose between mechanical convection mode for exceptional temperature uniformity or gravity convection mode for longer incubations where airborne contamination or drying of samples may be an issue The heating elements are strategically located on multiple sides of the c
Sigma Aldrich Fine Chemicals Biosciences SIGMA ALDRICH FINE CHEMICALS BIOSCIENCES
NC4026677 UNIVERSAL PLATFORM
Chemglass Life Sciences Castor Platform Only
Anti-Corrosion Anode. Patented Copper-Housed HEPA Filter for Superior Contamination Prevention. Factory Pre-Set, Door Thermostat. Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity. Front-Mounted Connections for Convenience. Over Temperature and CO2 Alarms. Inner Glass Viewing Door. Stainless Steel Chamber and Autoclavable Door Gasket Make Cleaning Easy. 5-Year Limited Warranty. The CLS-2447 series of CO2 incubators offers dependable infrared (IR), CO2 sensor control and is ideal for QA / QC applications. The incubators include an anti-corrosion anode which allows the use of distilled or tap water in the compact water jacket. De-ionized water should not be used. Anti-contamination features make cleaning a breeze and the CO2 sample port is located on the front control panel for quick and easy access. Incubators have microprocessor controllers. The humidity level inside the chamber is maintained at approximately 95%.
Alkali Scientific BenchRocker™ 2D Rocker, Variable Speed, 115V
BenchRocker™ 2D Rocker offers adjustable speed and tilt for a wide range of applications, large 14" x 12" work surface dual platform accessory that doubles work surface, and is cold room and incubator safe.
Thomas Scientific BioRocker 3D Mini Rocker, Fixed Speed, 10x7.5" platform with flat mat, 115V
Optimized speed and tilt for gel blotting, washing & staining Tri-directional motion for thorough, gentle mixing Cold room and incubator safe These labForce BioRocker™ 3D Mini Rockers provide the perfect 3-dimensional motion for all blot related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing in gel trays, boxes and other flat vessels. BioRocker 3D Mini Rockers are supplied with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Models have been designed to conserve bench space. The Mini Rocker is supplied with a 10.5 x 7.5 inch platform. The BioRocker 3D Mini Rocker can accept stackable platforms and handle loads up to 2kg. It has maintenance free brushless motors and is safe for use in cold rooms and incubators.
Thomas Scientific MAGic Clamp Universal Platform (for XL model) for flasks & tube racks (16 x 16.5")
Designed to fit and maximize capacity in most CO2 incubators Remote controlled, adjust settings without disrupting the CO2 environment Horizontally circular 19mm orbit for aeration & mixing Instantly exchange flask clamps with MAGic Clamp™ accessories (PATENTED) Full color TOUCH screen control panel The Orbi-Shaker CO2 is designed for shaking, mixing and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s). The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer fla
Thomas Scientific VorTemp 56 Shaking Incubator, 115V
Designed for simultaneous heating and mixing of small samples, the VorTemp™ 56 features interchangeable platforms for microtubes and microplates. Both platforms are supplied with the unit. Temperature in the VorTemp™ 56 microplate shaking incubator is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and microplates. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp™ 56 may also be used in the cold room for sub-ambient applications. Shake and incubate samples simultaneously Complete with platforms for microtubes and microplates Intelligent control Broad temperature and speed range Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples. A microprocessor controls all parameters including temperature and timed operation. Self diagnostic software continuously monitors the u
Thomas Scientific Mini Nutating Rocker, 8 x 6" platform, 115V
Digital temperature control Personal sized, 13 x 14.5" footprint (20L) Accepts bottles and flasks up to 2L Two models: Heat Only or Heat/Cool Internal outlet, for installation of shaker, rockers, etc. With digital temperature control, the MyTemp incubators provide convenient "set and walk away" operation, eliminating the need for external thermometers and repetitive "fine tuning" of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up (or cool down, -HC model only) while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Despite a modest footprint of 14.5 x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liter. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini
Sigma Aldrich Fine Chemicals Biosciences Mini LabRollerTM rotator A1EA
Simple yet versatile the Mini LabRoller Rotator is designed for mixing samples in both a horizontal and vertical plane. The Mini LabRoller Rotator is supplied with a rotisserie for 36 x 1.5 or 2.0 mL tubes. Two additional rotisseries are available separately.Compact design conserves valuable benchSimple construction allows for easy cleaning and decontamination Wide selection of motions from gentle rolling tumbling to end over end mixingCold room and incubator compatibleThree easily interchangeable rotisseries to hold various size tubes and platesOperating conditions 4 C - 65 C up to 85% RRH non-condensingWhen a rotisserie is inserted horizontally (tubes held vertically) an end over end motion is produced. The unit can then be used for simple rotating or rested on either end to create a tumbling motion. Placing the Mini LabRoller on the end with the power switch will create a more vigorous tumbling motion than resting it on the opposite end.A rocking
Eberbach Corp E6013-LINEAR SHAKER
- Heavy-duty benchtop unit
- Digital controller for precise speed and time regulation
- Fixed 1.5 in horizontal stroke length
- Maximum load capacity of 40 lbs
- Speed range from 60 to 280 oscillations/min
- Continuous duty rating
- Stainless steel power unit construction
- Electrical options: 115V or 230V @ 50/60Hz
- Footprint dimensions: 16.5 in x 11 in
- Various accessories are available separately