Stirrer Accessories
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 2L-12L Flasks, 538mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 2L-12L Flasks, 538mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 5L-20L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 5L-22L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences 19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size
19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 5L-20L Flasks, 605mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 5L-22L Flasks, 605mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences Replacement Bearing Sleeve, 19mm
Replacement Bearing Sleeve, 19mm. Replacement part for CG2077G series of stirrer bearings.
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 3 to 12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 3L-12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 24/40 Joint Size
10mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 24/40 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 20000mL Flasks, 55/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 22000mL Flasks, 55/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Hach Company Imhoff Cone Support Stand, Two Cones, Polyethylene
Cone support stand made of Polyethylene. Stand holds two Imhoff cones (plastic only) and has collapsible legs.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-20L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-22L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Grainger Linear Bearing: 15 Series, 2 13/16 in x 2 1/2 in x 2 3/4 in, Silver, Single Flanged, Std, Anodized, Mfr. Model 6515
Standard linear bearings each have a bracket lined with slippery PTFE (polytetrafluoroethylene) pads that allow parts to slide on T-slot framing structures. They attach to the slot on a T-slot framing profile, and another profile slides into the bearing. Also known as slide bearings, linear bearings have no moving parts and withstand dirt, water, impact, and vibration. This makes them well suited for automated equipment and other repetitive-motion applications that could wear out roller wheels. These bearings do not require assembly and are suitable for compression loads where the weight is applied from above the bearing. They should not be used for suspension applications.
Getinge USA MOD BALL BEARING STIRRER 1-7L
This item has a minimum qty of 3 per supplier requirements.
MOD BALL BEARING STIRRER 1-7L
Thermo Scientific™ Cimarec™ Biosystem 40B Controller
Enable synchronized operation of two stirrers with Thermo Scientific™ Cimarec™ Biosystem 40B Controller.
Fisherbrand™ Spider Support Stands for Overhead Stirrers
Able to clamp on the edge of pails, drums, square or rectangular tanks.