Stirrer Accessories
Chemglass Life Sciences Side Support Shelf, PTFE Coated Aluminum, Non-Folding, 12" W x 19" L
Side Support Shelf, PTFE Coated Aluminum, Non-Folding, 12" W x 19" L. Removable side shelves for Chemglass reactor support frames offer convenient support for the Chemglass data logger, motor controller, temperature monitor/controller, reagent bottles, etc. Shelves attach to the uprights of the support frame via PTFE coated aluminum mounting brackets. Shelves are constructed of aluminum and PTFE coated for chemical resistance. Units can be mounted on either side of the reactor frame.
Chemglass Life Sciences Bearing Body Only, 25.4mm Stir Bearing, Mechanical Seal, 2-3/8in Threaded Connection
Bearing Body Only, 25.4mm Stir Bearing, Mechanical Seal, 2-3/8in Threaded Connection. Our NEW mechanical seal bearing is the only design on the market that will permit you to use your current glass, metal or PTFE covered stir shaft. The design allows you to have the flexibility of vertical adjustment and still choose your agitator diameter and style. Bearing has a ferrule and locking nut to ensure that the seal rotates properly, and is supplied complete with a gold plated wrench. Lower joint adapters are supplied complete with perfluorinated o-rings and a loosening nut. PLEASE NOTE: BEARING BODY AND LOWER JOINT ADAPTER MUST BE ORDERED SEPARATELY.**MAX RPM WILL DEPEND ON SHAFT AND/OR AGITATOR TYPE, ALONG WITH ALIGNMENT OF MOTOR AND COUPLING. CHEMGLASS RECOMMENDS A MAX OF 500 RPM WHEN USED WITH ANY GLASS VESSEL, LID OR SHAFT. LONGER LENGTH STIRRER SHAFTS ARE REQUIRED FOR USE WITH CG-2077-M MECHANICAL SEAL STIR BEARINGS.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 1 to 2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 1000mL-2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 29/42 Inner Joint
Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 29/42 Inner Joint. Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon compression cap. The unique design of this bearing provides hours of continuous vacuum operation, with a minimum of "flaking" of the PTFE bearing surfaces.PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
MSC Durham Small Bearing Slide Rack, 6 Compartments, Steel, Gray
This small bearing slide rack is designed for efficient organization and storage. It features six compartments and is constructed from durable steel, finished in a neutral gray color, making it suitable for various industrial and organizational environments.
- Designed for small storage applications
- Equipped with 6 compartments
- Constructed from durable steel
- Features a gray finish
- Does not include removable dividers
Cole-Parmer Lightnin 829448 316 SS four-blade impeller ( A-200), 2.0" dia x 5/16" bore dia
Four-blade impellers are turbine impellers that have a 45 degree pitch and produce a semi-axial flow
Chemglass Life Sciences Scoping Marine Style Impeller Blade for 15L Bio Reactors used with 15mm Shaft
Marine style impeller blades are available in two styles, Vortexing and Scoping. The 3 through 7 liter sizes fit the 8mm shaft of the agitator assembly, while the 15 liter size fits the 15mm Shaft size. CLS-1385-36 and CLS-1385-37 are for use with CLS-1385-35 agitator assembly. These blades are used primarily for mammalian cell culture work. Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.
Chemglass Life Sciences Scoping Marine Style Impeller Blade for 5L & 7L Bio Reactors
Marine style impeller blades are available in two styles, Vortexing and Scoping. The 3 through 7 liter sizes fit the 8mm shaft of the agitator assembly, while the 15 liter size fits the 15mm Shaft size. CLS-1385-36 and CLS-1385-37 are for use with CLS-1385-35 agitator assembly. These blades are used primarily for mammalian cell culture work. Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Analytical Sales & Services 40/35 Fritted Glass Support Base For All 47mm Vacuum Filter Assemblies
Support Base, All Glass 40/35, , Each/1.
Cole-Parmer Caframo Pitched blade impeller; 2-1/4" dia (Stainless Steel)
Caframo Pitched blade impeller; 2-1/4" dia (Stainless Steel)
Cole-Parmer Stuart STAND GENERAL PURPOSE SKU 9996815
Accessories improve use of your products and increase efficiency. Spare parts help keep your equipment running smoothly.