Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
Thomas Scientific 24-M Ambient High Speed Microcentrifuge, 115V
Each pack contains 10 preloaded tip carriers (96 tips in each carrier) for 10µl, and 200µl sizes. The 1000µl size contains 3 inner sleeves, with 4 preloaded tip carriers in each sleeve (70 tips in each carrier). The 1000µl must be loaded in Denville's special 70 hole rack. Clear, simple instructions are printed on each pack
Hettich Centrifuges MIKRO 200,(30) 1.5-2.0mL,Package
Hettich MIKRO 200 MICROLITER TUBE PACKAGE 30 BIO-CONTAINMENT, (1) Centrifuge, (1) Fixed-angle Rotor, (30) Adapters 1.5mL, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Alkali Scientific Hermle Z167-M Microcentrifuge
The Hermle Z167-M Microcentrifuge is a powerful compact easy-to-use high speed microcentrifuge for labs looking to save valuable bench space but not compromise on speed and power The Hermle Z167-M is compact design houses a powerful maintenance free induction motor that can reach up to 14000rpm/15994 xg The included rotor is an 18-place Accompanied by an easy to use control panel the unique EZ-Scrolltouch pad gives you ease of control and a modern feel Additionally this model features a color changing LED status indicator that lets you know what operating state the unit is in from a distance Whether the unit is running on standby or in sleep mode it is easy to tell from a far with this new feature The advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10 In addition to retrieving saved programs the easy to use front panel can be used to adjust accel/decel rates run time and change the end of run alarm tone
Andwin Scientific MYFUGE BLUELID MICROCENTRIFUGE
The Mini Centrifuge is made to work for the centrifugation of microcentrifuge tubes and PCR strips. This product is designed with a quick-release rotor adapter, which does not require extra tools, that can hold either an 8-Place tube or 4x8 PCR strip
Braintree Scientific Mini Centrifuge, Purple, Quantity: 1 each
A New Line of Mini Microcentrifuges The new mini micro-centrifuges will replace the current Spectrafuge™ Mini Centrifuges. Simple and convenient to operate, the new mini microcentrifuges feature greater capacity (8 place MCT and 4 place PCR strip rotors), a quick-release rotor system and electronic brake. Once samples area loaded and the lid is closed, the rotor rapidly accelerates to 6,000 rpm, making it an ideal centrifuge for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations. Mini Microcentrifuge Product Features: Quick release rotor system - no tools needed to exchange rotors! Electronic braking - Allows for more rapid deceleration, less waiting Dual lid switch Compact, ruggeddesign Product Specifications Maximum Speed 6,000 rpm / 2,000 x g Maximum Capacity 8 x 1.5/2.0mL or 4 x 0.2mL strips Dimensions 6.8 x 5.8 x 4.8 in / 17.2 x 14.7 x 12.2 cm Electrical AC 100 - 240V, 50/60Hz
Research Products International Corp myFuge 12 Micro-Centrifuge, for 12 Microtubes and/or 4 PCR Strips
Unlike traditional mini centrifuges, the new MyFuge 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The unique COMBI-Rotor, which is included, is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal centrifuge with unmatched capacity and flexibility.
MTC Bio myFuge™ 5 Mini-Centrifuge, 1/EA
MyFuge™ 5 Mini-centrifuge, Int'l Version, 230V with Euro Plug
Braintree Scientific MyFuge Mini Centrifuge- Red
MyFuge Mini Centrifuge. Eight position microtube rotor. Storage compartment for PCR rotor. Near silent operation. Starts and stops in just seconds. Conserves valuable bench space. Specifications: Speed: 6,000 rpm/2,000 xg; Dimensions: 4.5" x 5.9" x 4.5", 11.4cm x 15cm x 11cm; Capacity: 8 x 1.5/2.0mI tubes, 16 x .2ml PCR tubes, 2 x .2ml PCR strips. MyFUGE™ mini centrifuge is a personal centrifuge that fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, MyFuge is extremely easy to use. Simply close lid and rotor instantly reaches 6,000 rpm. Open lid, and rotor quickly decelerates to a stop for removing samples. An increased capacity eight position microtube rotor is included and comes installed. A second rotor for .2ml PCR tubes and strips is also included and stored with rotor removal key in a convenient compartment on bottom of the centrifuge. All include microtube rotor, PCR rotor, .5ml and .2ml adapter.
Hettich Centrifuges MIKRO 220,6 x 8 PCR Strips,Package
Hettich MIKRO 220 MICROLITER TUBE PACKAGE STRIP, (1) Centrifuge, (1) Fixed-angle Rotor, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
ILEX LIFE SCIENCES LLC 24 x 12 mm Ossiform P3D Scaffolds, suitable for 24-well plates - gyroid structure, 300-400 micrometers porosity, bone-like 3D cell culture systems
Ossiform P3D Scaffolds are xeno-free, bioceramic scaffolds which provide a bone-like niche for in vitro and in vivo studies such as disease modeling, drug screening and bioengineering. The 3D printed scaffolds are developed to resemble native bone with respect to both physical and structural properties, such as high contents of β-tricalcium phosphate (β-TCP) and stiffness, as well as macro- and micro-porosities. The P3D Scaffolds are an easy plug-and-play solution for 3D cell culturing of bone harboring or bone related cell types. P3D Scaffolds are compatible with most common laboratory techniques and do not require major alterations of preexisting protocols and workflows. P3D Scaffolds provide you with a clinically relevant cell culture system of natural materials and customized structures which allow you to create predictive research models of human physiology and pathology.
Hettich Centrifuges MIKRO 220R, CryoTubes, Bio,Package
Hettich MIKRO R 220 Cryo Tube Package, (1) Centrifuge, (1) Fixed-angle Rotor, (1) Biocontainment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Alkali Scientific CellPro™ 0.5mL Microcentrifuge Tubes, Lock Cap, Clear, Conical, Sterile, 750/pk, 7500/cs
Our centrifuge tubes could be commonly used to collect cells and separate biomacromolecules by centrifugation in biochemistry and other biological fields. They can also be used to store photosensitive samples and special chemiluminescence reagents. USP VI grade polypropylene material, free from heavy metal. RCF: 30,000 xg. Special safe-lock cap design provides secure lid sealing. Clear graduations and frosted marking area. Easy to open and close. Autoclavable. RNase free, endotoxin level less than 0.1EU.
Hettich Centrifuges MIKRO 200R,(24) 1.5-2.0mL,Package
Hettich MIKRO 200R MICROLITER TUBE PACKAGE 24 BIO-CONTAINMENT, (1) Centrifuge, (1) Fixed-angle Rotor, (24) Adapters 1.5mL, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 185,(18) SpinCol,Bio,Package
Hettich MIKRO 185 Spin Column Package 18, (1) Centrifuge, (1) Fixed-angle Rotor, (18) Adapters 0.5mL, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years