Specialty Microscope Slides
Electron Microscopy Sciences Cyto-Slide Vce & Lines
Special glass slides measuring 1x3" (25x75 mm) and 1 mm thick. Superfrost letters VCE and lines on the same side as the superfrost end.
Electron Microscopy Sciences Borosilicate Capillary Glass Slide, 0.70x7.0 mm, 100 mm, 0.460 Wall thick
Micro glass slides are precision rectangular glass capillary tubes for use in microscopic viewing of liquid samples. Capillary action instantly collects the sample and the thin glass walls minimize evaporation. The design of these cells eliminates the needs for cover glass and the hanging drop method.
Made from Corning 7740 borosilicate, low expansion, type I glass, these micro glass slides can withstand heat up to 500 degree C. Samples can be retained for future reference by sealing or cementing open ends.
Micro glass slide are packaged in plastic vials.
I.D. tolerance +/- 10% and wall tolerance +/- 20%.
I.D.: 0.70 x 7.0 mm
Length: 100 mm
Wall thickness: 0.460
Electron Microscopy Sciences Borosilicate Capillary Glass Slide, 0.03x 0.3 mm, 50 mm, 0.025 Wall thick
Micro glass slides are precision rectangular glass capillary tubes for use in microscopic viewing of liquid samples. Capillary action instantly collects the sample and the thin glass walls minimize evaporation. The design of these cells eliminates the needs for cover glass and the hanging drop method.
Made from Corning 7740 borosilicate, low expansion, type I glass, these micro glass slides can withstand heat up to 500 degree C. Samples can be retained for future reference by sealing or cementing open ends.
Micro glass slide are packaged in plastic vials.
I.D. tolerance +/- 10% and wall tolerance +/- 20%.
I.D.: 0.03 x 0.3 mm
Length: 50 mm
Wall thickness: 0.025
Electron Microscopy Sciences CoverWell™ Incubation Chambers, 20 mcL, 0.2 mm depth
CoverWell incubation reusable chambers are reusable, easy to apply incubation chambers that attach to slides without the use of adhesive.
Microwavable for permeabilization and retrieval steps.
Preserve kinetic (non-capillary) fluid dynamics for better reagent mixing and lower backgrounds.
Eliminate precipitate deposits on specimens by incubating slides and specimens upside down during enzymatic color precipitation reaction.
Provides an exceptionally secure seal during submerged water bath and/or high temperature incubations.
Rnase and Dnase free, hydrophobic
Easily removed (reusable)
Adheres to wet or dry surfaces.
Volume: 20 µl
Depth: 0.2 mm
Electron Microscopy Sciences Macro/Latex Agglutination Slides 6, White Oval; 17.4 X26 mm
Slide, Macro/Latex Agglutination, Glass Size: 4.215" x 2"
Ibidi USA µ-Slide III 3D Perfusion, ibiTreat - Tissue Culture Treated Polymer Coverslip
The ibidi product family is comprised of a variety of µ-Slides and µ-Dishes, which have all been designed for high-end microscopic analysis of fixed or living cells. The high optical quality of the polymer material is similar to that of glass. This allows the researcher to perform a wide variety of fluorescence experiments with uncompromised resolution and choice of wavelength. The µ–Slide III 3D Perfusion is an array of 6 wells where cells can be cultivated and, subsequently, investigated with microscopical methods. Two of the 6 wells respectively are connected by a channel. The channels can be connected to a pump for perfusing the wells in order to perform long term cell culture assays with 3D structures. #1.5 polymer coverslip, tissue culture treated, sterilized, 15 pcs./box
Electron Microscopy Sciences Microwave Calibration Slide Set
A calibration slide for microwave staining. A set which includes two glass slides. Slide #1 has liquid crystal squares corresponding to the following temperatures: 35 degree C, 40 degree C, 45 degree C; Slide #2 has liquid crystal squares corresponding to the following temperatures: 50 degree C, 55 degree C, and 60 degree C.
This calibration set will ensure reproducible programming of the oven to achieve an ideal target temperature of large staining volumes (50-200 ml solution). Developed in collaboration with Dr. Gary Login, Beth Israel Hospital, Boston, MA
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 16 Well, 6 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 6 mm
Includes: Stainless Steel Clips
Electron Microscopy Sciences ProPlate™ MicroArray Slide Tray & Cover for Snap Clip Modules
Organize up to 4 chambered slides into the footprint of a microtiter plate for use with automated liquid handling robots or plate washers.
Electron Microscopy Sciences ProPlate™ MicroArray Slide Slide Module 1 Well, 16.5 x 70 mm I.D., Stainless Steel Clips
ProPlate re-usable, multi-well chambers fit 25 x 75 mm glass microscope slides. Chambers depth of 7.5 mm. Stainless steel Spring Clips are used with laser fabricated glass slides that may have micro-fractures or chipped edges.
I.D.: 16.5 x 70 mm
Includes: Stainless Steel Clips
Ted Pella Inc Adhesion Super Frost + Slides, 51 x 75mm (2" x 3") pre-cleaned
Adhesion Super Frost + Slides, 51 x 75mm (2" x 3") pre-cleaned
Ibidi USA µ-Slide I 0.6 Luer, Uncoated - Uncoated Polymer Coverslip
The ibidi product family is comprised of a variety of µ-Slides and µ-Dishes, which have all been designed for high-end microscopic analysis of fixed or living cells. The high optical quality of the polymer material is similar to that of glass. This allows the researcher to perform a wide variety of fluorescence experiments with uncompromised resolution and choice of wavelength. The µ-Slide I Luer is designed for cell culture under perfusion and all flow applications. Main applications are the simulation of blood vessels for arteriosclerosis research and applying defined shear stress and shear rates on cells inside the channel. The female Luers allow easy connections to tubing and pump systems. 600 µm high channel, #1.5 polymer coverslip, hydrophobic, sterilized, 15 pcs./box
Ibidi USA µ-Slide VI 0.4, Collagen IV - Collagen IV Coated Polymer Coverslip
The ibidi product family is comprised of a variety of µ-Slides and µ-Dishes, which have all been designed for high-end microscopic analysis of fixed or living cells. The high optical quality of the polymer material is similar to that of glass. This allows the researcher to perform a wide variety of fluorescence experiments with uncompromised resolution and choice of wavelength. The convenient six channel format of the µ-Slide VI 0.4 is ideal for static cell cultivation and the application of standard immunofluorescence protocols, like treatment, staining, and microscopy of living or fixed cells. Alternatively, the µ-Slide VI 0.4 can be connected to a pump and enables you to observe cells under flow conditions. 6 x 400 µm high channels, #1.5 polymer coverslip, collagen IV coated, sterilized, 15 pcs./box
Ibidi USA µ-Slide III 3D Perfusion, Uncoated - Uncoated Polymer Coverslip
The ibidi product family is comprised of a variety of µ-Slides and µ-Dishes, which have all been designed for high-end microscopic analysis of fixed or living cells. The high optical quality of the polymer material is similar to that of glass. This allows the researcher to perform a wide variety of fluorescence experiments with uncompromised resolution and choice of wavelength. The µ–Slide III 3D Perfusion is an array of 6 wells where cells can be cultivated and, subsequently, investigated with microscopical methods. Two of the 6 wells respectively are connected by a channel. The channels can be connected to a pump for perfusing the wells in order to perform long term cell culture assays with 3D structures. #1.5 polymer coverslip, hydrophobic, sterilized, 15 pcs./box